• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.203-206
• /
• 1998

Effects of types of semicon compounds on electrical properties of XLPE were investigated. The amounts of charge of XLPE were changed with the contents of additive included in semicon electrodes, but homocharge in cathode was observed. In the aging experiment under high voltage, it was found that semiconductive layer with high impurity contents played an important role in the decrease of ACBD strength of XLPE.

• Journal of Magnetics
• /
• 제11권3호
• /
• pp.111-114
• /
• 2006

We electroplated copper-cobalt thin films on a silicon substrate, which had 150 nm thick copper seed layer. The adhesion between the two metallic layers could be increased by utilizing a proper organic additive, pulse plating technique, and high temperature annealing. The thin films exhibited columnar growth of the deposits and enhanced adhesion. This is attributed to the grain growth mechanism introduced by the additive and annealing.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 춘계학술대회 논문집
• /
• pp.178-178
• /
• 2015

SAP 씨앗층용 구리필름에 대한 결정구조와 에칭속도의 상관관계를 알아보았다. 그 결과, 저지수 면보다는 고지수면이 우선적으로 성장되어 있는 구리피막이 높은 에칭속도를 나타내었다. 이와 같은 우선결정방위와 에칭속도의 관계를 결정구조적인 관점에서 해석하였다.

• 열처리공학회지
• /
• 제11권3호
• /
• pp.177-185
• /
• 1998

The purpose of this research is to investigate the effects of Co, Co-Ti addition on the sintering characteristic of $(Ti_{1-x}Alx)N$ material synthesized by the direct nitriding method for a application as a cermet material. The observed shrinkage rates of $(Ti_{1-x}Alx)N$ pellets increase with the additive (Co, Co-Ti) content, temperature and time, and also the pellets with the same additive content exhibit the shrinkage behavior that depends on the Ti/Al ratio. However, although the shrinkage rates in this study is the mast higher (36%), the density of the sintered $(Ti_{1-x}Alx)N$ pellet is below 80% density in theory because of the partial segregation and the dense band defect of AlCo compound. Consequentely, it is considered that Co was not effective as a binder material because the wettability of liquid Co metal on $(Ti_{1-x}Alx)N$ materials is poor, In $(Ti_{1-x}Alx)N$ with Ti-Co additive, the stoichiometric TiN is transformed by the under-stoichiometric TiNx(x<1.0) during sintering, leading to the good properties such as hardnees and hot oxidation.

• Tribology and Lubricants
• /
• 제10권4호
• /
• pp.43-50
• /
• 1994

In order to elucidate the effects of co-existing additives (S$_{8}$, TBP: Tri butyl phosphate, ZnDTP: Zinc-dialkyl dithiophosphate) and the role of reacted surface film on the friction behavior of MoDTP (molybdenum dialkyl dithiophosphate), a friction experiment using a dual circular pipe edge surface type friction tester and XPS (X-ray photoelectronic spectrum) surface analysis were conducted. Friction reduction with MoDTP lubricant was proved to be greatly influenced by co-existing additive species. It was dependent on the properties of the film formed through the reaction between the additive and the surface. Phosphate film reduced the friction coefficient of MoDTP through suppression of diffusion of Mo compounds towards the metal substrate. On the other hand, sulfate film, which is inherently rich in lattice defects, did not lead to any appreciable friction reduction with MoDTP since the diffusion of the Mo compound towards the metal substrate was not effectively suppressed. With ZnDTP additive, the sulfide film formed through decomposition greatly influenced the lubricating performance of MoDTP. As such, properties of surface films formed from additives were proved to yield significant influence on the lubrication performance of MoDTP.

• 동력기계공학회지
• /
• 제9권4호
• /
• pp.130-136
• /
• 2005

The effects of additional Mg content, the size and volume fraction of reinforcement phase on the mechanical properties of ceramic particle reinforced aluminium matrix composites fabricated by pressureless metal infiltration process were investigated. The hardness of $SiC_p/AC8A$ composites increased gradually with an increase in the additive Mg content, while the bending strength of $SiC_p/AC8A$ composites increased with an increase in additive Mg content up to 5%. However, this decreased when the level of additive Mg content was greater than 5% due to the formation of coarse precipitates by excessive Mg reaction and an increase in the porosity level. The hardness and strength of the composites increased with decreasing the size of SiC particle. It was found that the composites with smaller particles enhanced the interfacial bonding than those with bigger particles from fractography of the composites. The hardness of $Al_2O_{3p}/AC8A$ composites increased gradually with an increase in the volume fraction, however, the bending strength of $Al_2O_{3p}/AC8A$ composites decreased when the volume fraction of alumina particle was greater than 40% owing to the high porosity level.

• 한국분말재료학회지
• /
• 제30권3호
• /
• pp.223-232
• /
• 2023

Metal additive manufacturing (AM) has transformed conventional manufacturing processes by offering unprecedented opportunities for design innovation, reduced lead times, and cost-effective production. Aluminum alloy, a material used in metal 3D printing, is a representative lightweight structural material known for its high specific strength and corrosion resistance. Consequently, there is an increasing demand for 3D printed aluminum alloy components across industries, including aerospace, transportation, and consumer goods. To meet this demand, research on alloys and process conditions that satisfy the specific requirement of each industry is necessary. However, 3D printing processes exhibit different behaviors of alloy elements owing to rapid thermal dynamics, making it challenging to predict the microstructure and properties. In this study, we gathered published data on the relationship between alloy composition, processing conditions, and properties. Furthermore, we conducted a sensitivity analysis on the effects of the process variables on the density and hardness of aluminum alloys used in additive manufacturing.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권1호
• /
• pp.52-60
• /
• 2010

This experiment was conducted on 60 Hanwoo calves comprising five feed additive groups, with 12 calves in each group, to determine the effects of additives at pre- and post-weaning on growth performance and blood profile. The groups were control, antibiotic (Neomycin 110 ppm), illite (2%), fermented green tea probiotics (FGTP, 0.5%), and mixed additives (FGTP 0.25%, illite 1% and licorice 0.1%). The calves were offered experimental pellet feeds ad libitum and after one month were supplied with imported timothy hay. They moved freely within the group and suckled their mother' milk during the pre-weaning stage (birth to 3 months) and were separated from their dam during the post-weaning stage (4-5 months). During the pre-weaning stage, the highest average daily gain (ADG) was recorded in the antibiotic- and mixed additive-fed groups followed by FGTP, control and illite groups. In the post-weaning stage, significantly higher total weight gain and ADG were recorded in both the FGTP and mixed additive groups compared to the other groups (p<0.05). Feed efficiency of mixed additive- and illite-fed calves were almost similar with antibiotic-fed calves compared to the other two groups, but the ADG was lowest in illite-fed calves during the pre-weaning stage. In contrast, post-weaning calves fed FGTP and mixed additives showed better feed efficiency. The values of hematological indices, differential leukocyte count, blood proteins and immunoglobulin among the additive-fed calves were not significantly different (p>0.05), although hemoglobin and hematocrit values were lower in FGTP compared to control, but similar in mixed additive and antibiotic groups. These results indicate no detrimental effects of feed additives on the blood profile of calves at both pre- and post-weaning age. Serum albumin in post-weaning calves of all feed additive groups were similar but significantly lower (p<0.05) than in the control group. Post-weaning, IgM was significantly lower (p<0.05) in illite-fed calves compared to other treatment groups, but there was no difference at pre-weaning. Considering all factors, the mixed feed additives and FGTP can be the replacement feed formula for antibiotic for Hanwoo beef calf production, especially when used post- weaning.

• 한국식품영양과학회지
• /
• 제41권12호
• /
• pp.1842-1846
• /
• 2012

된장과 고추장에 대하여 Bacillus cereus 포자를 $10^5$ spore/g 접종하고 이의 저감화에 적용 가능한 허들로서 additive(95% ethanol 3%, 1% oregano 추출물 0.3%), Joule 가열($95^{\circ}C$, 5분) 및 초고압처리(500 MPa, $45^{\circ}C$, 5분)를 적용하여 Bacillus cereus 포자의 살균효과와 저장성을 분석하였다. 된장에 있어 AJ(additive+Joule 가열) 및 AJP(additive+Joule 가열+초고압) 처리구는 각각 2.80 log 및 3.74 log 감소효과를 보였고 고추장의 경우에는 각각 4.71 log 및 5.60 log 감소를 보여 Joule 가열처리구는 된장과 고추장에 있어서 additive 처리구와 함께 Bacillus cereus 포자의 살균에 상당한 시너지 효과를 나타내는 것으로 판단되었다. 한편 $30^{\circ}C$ 저장시험에서 additive, Joule 가열 및 초고압 병행 처리는 된장 및 고추장에서 낮은 수준의 포자를 유지하는 데에도 유효한 효과를 보여 AJ(additive+Joule 가열) 및 AJP(additive+Joule 가열+초고압) 처리기법은 된장 및 고추장의 Bacillus cereus 포자에 대한 효율적인 살균방법으로서 적용이 가능할 것으로 보였다.

• 한국잠사곤충학회지
• /
• 제39권1호
• /
• pp.62-66
• /
• 1997

The MAA graftings in silk fiber were done by redox system for the purpose of investingating the effect of ferrous sulfate additive on the grafting rate and graft ratio in various conditions. The graft ratio was higher in redox graft system than in peroxide graft system and the graft ratio in redox graft system was also higher depending on decrease of ferrous sulfate additive. The saturation graft ratio obtained by empirical equation, log X=K/t, was increasing depending on the increase of ferrous sulfate additive. Initial grafting rate was increased but the latter grafting rate was decreased in redox graft system. The effects of liquor ratio(L.R.) on the graft ratio in redox graft system, were higher in high L.R. than in low L.R..