• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.5
• /
• pp.505-512
• /
• 2000

In this paper, an adaptive multimedia synchronization scheme for VOD (Video On Demand) services in internet environments is proposed. This scheme considers the characteristics of MPEG (Moving Picture Expert Group) system stream. Consequently, the intra-synchronization is handled at the pack layer, and the inter-synchronization is handled at the packet layer. The proposed scheme can cope adaptively with variation of packet loss, jitter and client's playback capacity. If there are variations of the packet loss or client's playback capacity, the server will change the transmission rate by selective picture skip. The client can then adjust and control the playback time according to the variation of the network jitter. Our experimental results show that the proposed scheme can quickly adapt to the network condition, and can guarantee a better quality of service than the other existing schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.3B
• /
• pp.380-389
• /
• 2010

Since the internet is intend to be the best effort service, the system that stream a large amount of high quality medias need a techniques to overcome the network status for implementation. In this paper, we design and implement a method that estimate quickly whether network permits the needed bandwidth of media and a method that control QoS through that. Presented system uses Relative One-Way Delay(ROWD) trend in the case of the former, and leverages temporal encoding among Scalable Video Coding(SVC) that is apt to apply real time comparatively in the case of the latter. The streaming server classifies the medias by real time to several rates and begins transmission from top-level and is reported ROWD trend periodically from the client. In case of the server reported only 'Increase Trend', the sever decides that the current media exceeds the available bandwidth and downgrades the next media level. The system uses probe packet of difference quantity of the target level and the present level for upgrading the media level. In case of the server reported only 'No Increase Trend' by the ROWD trend response of the probe packet from client, the media level is upgraded. The experiment result in a fiber to the home(FTTH) environment shows progress that proposed system adapts faster in change of available bandwidth and shows that quality of service also improves.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.11
• /
• pp.1066-1070
• /
• 2010

In wireless network, energy efficiency is an important design consideration for continuous multimedia streaming service. This paper proposes a new streaming system, called BACASS (Buffer-Aware and Content-Aware Streaming System) that working on the 802.11e U-APSD (Unscheduled Automatic Power Save). The BACASS leads the DP (Doze Period) of U-APSD for improving energy efficiency by utilizing the PSNR based on content-aware and client buffer occupancy that is hinged on a network-aware streaming system using SVC. The simulation results demonstrate the effectiveness of the proposed streaming system.

• The Korean Journal of Emergency Medical Services
• /
• v.24 no.3
• /
• pp.89-106
• /
• 2020

Purpose: This study attempts to improve the status of emergency care for major trauma patients transferred by 119 paramedics by analyzing the status of emergency care and the obstacles to the spinal motion restriction (SMR) for major trauma patients. Methods: A total of 600 rescue logs were collected from major trauma patients transported by 119 paramedics in the C fire department from Jan. 1, 2015, to Dec. 31, 2017. And then, 280 questionnaires were collected from the 119 paramedics in C fire department from May 3 to Jun. 3, 2019. Data were analyzed using SPSS 24.0 version. Results: Among 499 spinal motion restriction adaptive patients, the spinal motion restriction rate was 51.1% (255 individuals). Lack of human resources and quality control problems were among the obstacles to spinal motion restriction. Conclusion: The 119 paramedics should improve their activeness and skills in performing emergency care, and since training and experience are of crucial importance, they should expand various education systematized according to demand.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.2
• /
• pp.243-251
• /
• 2010

The military has been putting great efforts into applying data communication on existing voice communication systems being used in NCW(Network Centric Warfare). Data communication will be an effective choice in one of many effort to yield a minimum kill chain, comparing to legacy voice communications, when tactical units conduct their missions. However, the required budget will be enormous, in case of the replacement of a lot of legacy communication systems with new one. As a cost-effective alternative, the tactical data communication systems using the conventional radio systems instead of the development of new radio systems has been proposed. It is mandatory, though, to ensure QoS while maintaining data communication by making use of legacy radio systems already in use. This paper focuses on the performance issues experimented and analyzed for tactical data communication through the legacy radio systems as the first step towards guaranteed QoS. We have conducted various experiments such as the transmission error rate on certain tactical messages, performance evaluation of redundant transfers, the relationship between the transmission frame size and rate of error, the identification of error points in the transmission frame, and techniques to reduce the errors in both hopping and non-hopping modes. As a result of the performance experiments, The adaptive communication module which decides the redundant transmission or the Forward Error Correction(FEC) technique by analyzing channel status and current transmission status(hopping/non-hopping) of the legacy radio should be designed. the FEC technique in non-hopping, and the redundant transmission technique in hopping mode was recommended from the result of experiment with the frame size is 20bytes in non-hopping and 10Bytes frame size in hopping mode.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.8
• /
• pp.984-998
• /
• 1999

최근 개인 휴대 통신에 대한 관심도가 증가하면서 B-ISDN (Broadband Integrated Services Digital Network)과 같은 기존의 유선 망에서 제공하던 다양한 멀티미디어 응용 지원을 무선 망으로 확장시키기 위한 연구가 활발히 진행되고 있다. 그러나 기존의 유선 망에서는 멀티미디어 응용 지원을 위해 QoS (Quality of Service) Provisioning에 관한 많은 연구가 되어 있으나 무선 망에서는 이동성과 무선 전파의 열악한 전송으로 인해 새로운 QoS Provisioning 방법에 관한 연구가 필수적이다. 본 논문에서는 이러한 무선 망의 특수성으로 인해 발생할 수 있는 서비스의 질 저하와 강제 종료를 줄임으로써 지속적인 QoS를 보장해 주고 한정된 무선 자원을 효율적으로 사용하며 처리에 의한 오버헤드를 줄이기 위하여 다음과 같은 세 가지 방법을 제안하였다. 첫째, 핸드오프 강제 종료율을 줄이기 위하여 대역폭 예약 방법을 사용하되 특정 셀의 트래픽 특성에 맞게 또한 시간대에 따른 트래픽 특성에 따라 예약 대역폭의 양을 조절하는 적응적 대역폭 예약 방법이다. 둘째, 많은 경우 각 셀의 트랙픽 변화는 일정한 주기로 변화한다는 특성에 따라 과거의 트래픽 정보를 이용하는 예측 기반의 대역폭 예약 방법이다. 마지막으로 호의 종류, 트래픽 특성, 단말기의 이동 속도에 따라 다른 우선 순위에 의해 호 수락 제어를 수행하는 우선 순위 기반의 호 수락 제어를 제안하였다. 시뮬레이션을 통하여 기존에 제안된 방법과 성능 비교하여, 요구되는 수준의 QoS 보장과 효율적인 자원의 사용, 요구되는 처리비용의 최소화를 통해 전체 시스템의 성능 향상을 입증하였다.Abstract As interest in wireless hand-held terminals and in personal communications services increases recently, there have been broad studies on the ways to support multimedia applications provided in wired networks such as B-ISDN (Broadband Integrated Services Digital Network) in wireless networks. However, since many studies have focused on Quality of Service (QoS) Provisioning in wired networks to provide multimedia applications, new methods of QoS Provisioning are needed in wireless networks to resolve the problem of wireless channel fading and the difficulty of mobility occurred in wireless networks. This paper proposes three schemes of QoS Provisioning in wireless networks which will make continuous QoS guarantee and efficient use of limited wireless resources possible. The first scheme reserves bandwidth in proportion to the amount of real-time traffic in the neighbor cells to decrease the handoff dropping rate of delay sensitive real-time connections, adapting reserved bandwidth for efficient resource utilization. The second scheme is predictive bandwidth reservation scheme that utilizes the past handoff information. It can decrease overheads required to adapt bandwidth reservation. The last scheme is priority-based call admission control prioritizing traffic type (real-time traffic/ non-real-time traffic), connection type (new connection /handoff connection), and mobile terminal speed (fast mobile/slow mobile). Simulation results show that the proposed QoS Provisioning schemes improve the total system performance by achieving three goals - required QoS guarantee, higher bandwidth utilization and less overhead.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.2
• /
• pp.618-633
• /
• 2014

Relay technology is becoming more important for mobile communications and wireless internet of things (IoT) networking because of the extended access network coverage range and reliable quality of service (QoS) it can provide at low power consumption levels. Existing mobile multihop relay (MMR) technology uses fixed-point stationary relay stations (RSs) and a divided time-frame (or frequency-band) to support the relay operation. This approach has limitations when a local fixed-point stationary RS does not exist. In addition, since the time-frame (or frequency-band) channel resources are pre-divided for the relay operation, there is no way to achieve high channel utilization using intelligent opportunistic techniques. In this paper, a different approach is considered, where the use of mobile/IoT devices as RSs is considered. In applications that use mobile/IoT devices as relay systems, due to the very limited battery energy of a mobile/IoT device and unequal channel conditions to and from the RS, both minimum energy consumption and QoS support must be considered simultaneously in the selection and configuration of RSs. Therefore, in this paper, a mobile RS is selected and configured with the objective of minimizing power consumption while satisfying end-to-end data rate and bit error rate (BER) requirements. For the RS, both downlink (DL) to the destination system (DS) (i.e., IoT device or user equipment (UE)) and uplink (UL) to the base station (BS) need to be adaptively configured (using adaptive modulation and power control) to minimize power consumption while satisfying the end-to-end QoS constraints. This paper proposes a minimum transmission power consuming RS selection and configuration (MPRSC) scheme, where the RS uses cognitive radio (CR) sub-channels when communicating with the DS, and therefore the scheme is named MPRSC-CR. The proposed MPRSC-CR scheme is activated when a DS moves out of the BS's QoS supportive coverage range. In this case, data transmissions between the RS and BS use the assigned primary channel that the DS had been using, and data transmissions between the RS and DS use CR sub-channels. The simulation results demonstrate that the proposed MPRSC-CR scheme extends the coverage range of the BS and minimizes the power consumption of the RS through optimal selection and configuration of a RS.

• The KIPS Transactions:PartC
• /
• v.17C no.3
• /
• pp.271-280
• /
• 2010

For the next generation mobile communication system, diverse wireless network techniques such as beyond 3G LTE, WiMAX/WiBro, and next generation WLAN etc. are proceeding to the form integrated into the All-IP core network. According to this development, Beyond 3G integrated into heterogeneous wireless access technologies must support the vertical handover and network to be used of several radio networks. However, unified management of each network is demanded since it is individually serviced. Therefore, in order to solve this problem this study is introducing the theory of Common Radio Resource Management (CRRM) based on Generic Link Layer (GLL). This study designs the structure and functions to support the vertical handover and propose the vertical handover algorithm of which policy-based and MCDM are composed between LTE and WLAN systems using GLL. Finally, simulation results are presented to show the improved performance over the data throughput, handover success rate, the system service cost and handover attempt number.

• Journal of Intelligence and Information Systems
• /
• v.17 no.1
• /
• pp.53-69
• /
• 2011

Vision and voice-based technologies are commonly utilized for human-robot interaction. But it is widely recognized that the performance of vision and voice-based interaction systems is deteriorated by a large margin in the real-world situations due to environmental and user variances. Human users need to be very cooperative to get reasonable performance, which significantly limits the usability of the vision and voice-based human-robot interaction technologies. As a result, touch screens are still the major medium of human-robot interaction for the real-world applications. To empower the usability of robots for various services, alternative interaction technologies should be developed to complement the problems of vision and voice-based technologies. In this paper, we propose the use of accelerometer-based gesture interface as one of the alternative technologies, because accelerometers are effective in detecting the movements of human body, while their performance is not limited by environmental contexts such as lighting conditions or camera's field-of-view. Moreover, accelerometers are widely available nowadays in many mobile devices. We tackle the problem of classifying acceleration signal patterns of 26 English alphabets, which is one of the essential repertoires for the realization of education services based on robots. Recognizing 26 English handwriting patterns based on accelerometers is a very difficult task to take over because of its large scale of pattern classes and the complexity of each pattern. The most difficult problem that has been undertaken which is similar to our problem was recognizing acceleration signal patterns of 10 handwritten digits. Most previous studies dealt with pattern sets of 8~10 simple and easily distinguishable gestures that are useful for controlling home appliances, computer applications, robots etc. Good features are essential for the success of pattern recognition. To promote the discriminative power upon complex English alphabet patterns, we extracted 'motion trajectories' out of input acceleration signal and used them as the main feature. Investigative experiments showed that classifiers based on trajectory performed 3%~5% better than those with raw features e.g. acceleration signal itself or statistical figures. To minimize the distortion of trajectories, we applied a simple but effective set of smoothing filters and band-pass filters. It is well known that acceleration patterns for the same gesture is very different among different performers. To tackle the problem, online incremental learning is applied for our system to make it adaptive to the users' distinctive motion properties. Our system is based on instance-based learning (IBL) where each training sample is memorized as a reference pattern. Brute-force incremental learning in IBL continuously accumulates reference patterns, which is a problem because it not only slows down the classification but also downgrades the recall performance. Regarding the latter phenomenon, we observed a tendency that as the number of reference patterns grows, some reference patterns contribute more to the false positive classification. Thus, we devised an algorithm for optimizing the reference pattern set based on the positive and negative contribution of each reference pattern. The algorithm is performed periodically to remove reference patterns that have a very low positive contribution or a high negative contribution. Experiments were performed on 6500 gesture patterns collected from 50 adults of 30~50 years old. Each alphabet was performed 5 times per participant using $Nintendo{(R)}$ $Wii^{TM}$ remote. Acceleration signal was sampled in 100hz on 3 axes. Mean recall rate for all the alphabets was 95.48%. Some alphabets recorded very low recall rate and exhibited very high pairwise confusion rate. Major confusion pairs are D(88%) and P(74%), I(81%) and U(75%), N(88%) and W(100%). Though W was recalled perfectly, it contributed much to the false positive classification of N. By comparison with major previous results from VTT (96% for 8 control gestures), CMU (97% for 10 control gestures) and Samsung Electronics(97% for 10 digits and a control gesture), we could find that the performance of our system is superior regarding the number of pattern classes and the complexity of patterns. Using our gesture interaction system, we conducted 2 case studies of robot-based edutainment services. The services were implemented on various robot platforms and mobile devices including $iPhone^{TM}$. The participating children exhibited improved concentration and active reaction on the service with our gesture interface. To prove the effectiveness of our gesture interface, a test was taken by the children after experiencing an English teaching service. The test result showed that those who played with the gesture interface-based robot content marked 10% better score than those with conventional teaching. We conclude that the accelerometer-based gesture interface is a promising technology for flourishing real-world robot-based services and content by complementing the limits of today's conventional interfaces e.g. touch screen, vision and voice.