• Journal of Electrical Engineering and Technology
• /
• v.3 no.4
• /
• pp.520-527
• /
• 2008

This work focuses on the evaluation of active power filter which is controlled by fuzzy logic and neural network based controller for harmonic mitigation and power factor enhancement. The APF consists of a variable DC voltage source and a DC/AC inverter. The task of an APF is to make the line current waveform as close as possible to a sinusoid in phase with the line voltage by injecting the compensation current. The compensation current is estimated using adaptive neural network. Using the estimated current, the proposed APF is controlled using neural network and fuzzy logic. Computer simulations of the proposed APF are performed using MATLAB. The results show that the proposed techniques for the evaluation of APF can reduce the total harmonic distortion less than 3% and improve the power factor of the system to almost unity.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.11a
• /
• pp.150-153
• /
• 2014

영상 표시 장치에서 대조 이미지의 왜곡 현상을 보완하기 위해 히스토그램 평활화(Histogram Equalization)와 플래토 평활화(Plateau Equalization)가 사용된다. 히스토그램 평활화(Histogram Equalization)를 이용하여 명암대비를 증가 시킬 경우 과도한 이미지의 밝기 변화에 따른 과포화 현상이 발생하며 실시간 시스템에서는 물체 추적에 왜곡 현상이 발생한다. 특히, 적외선 영상(infrared image)과 같이 명암비가 한쪽으로 치우쳐 있는 영상들을 명암비를 개선하기 위해서는 플래토 평활화(Plateau Equalization)와 같은 영상 개선 방법이 필수적이다. 플래토 평활화에서는 임계값을 사용하는 방법이 제시되고 있지만 실험에 의한 최적 임계값을 찾아내는 방식이며, 이 방법은 입력되는 새로운 영상마다 임계값을 실험에 의해 매번 반복해서 도출해야 문제점이 있다. 본 논문에서 제안하는 방법은 과포화 되는 이미지 영역의 문제를 해결하기 위해 제시하는 방법으로 히스토그램 평활화(Histogram Equalization)의 동적 분할하는 알고리즘에 근거하되, 입력 영상에따라 적응적으로 임계값을 설정하는 기법을 제안한다. 실험을 통해 제안하는 방법이 실시간 영상에서 기존의 동적분할 히스토그램에 비해 자연스럽게 명암비를 개선하여 과포화 되거나 중요한 정보를 누락하여 왜곡 되지 않게 자연스러운 화면을 재생하는 방법을 제안한다.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.4
• /
• pp.1305-1315
• /
• 2000

It is known that a digital image enlargement technique can increase the size of he image but the practical enhancement of resolution is trifle because the frequency bandwidth of the original image is basically limited. To solve this problem, this paper proposes the digital image enlargement technique which interpolates the interpolation points of horizontal and vertical direction by weighting according to the direction of edge information with the component of FOI(First Order Interpolation)and output of the pseudomedian filter for image enlargement and interpolates the interpolation points of diagonal direction by selectively transposing the direction of the subwindows of the pseudomedian filter according to the distribution of neighbored pixels thereto in the extended image. According to the proposed methods, the digital image enlargement which preserves the characteristic of the pseudomedian filter capable of keeping the reconstruction of edge information and reflects the advantage of FOI can be performed. Therefore, visual artifacts could be effectively suppressed, and most characteristics and shape of the original image can be reconstructed as well.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4B
• /
• pp.637-646
• /
• 2010

For 40 Gb/s data transmission through electrical backplane trace up to 40 inch length on four layer fire-resistant (FR-4), we have designed the 40 Gb/s backplane channel model consisting of four channel 10 Gb/s. Simulation results show an enhancement of backplane channel characteristics excellent more than requirements specified in IEEE P802.3ba at 10 Gb/s. This paper provides a review of the structures and algorithms used in receive and adaptive equalization for 40 Gb/s backplane Ethernet. The use of this backplane channel model could achieves better receive equalizer at great data rate than 10 Gb/s.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.9
• /
• pp.4271-4294
• /
• 2018

Communication cost is the most important factor in Wireless Sensor Networks (WSNs), as exchanging control keying messages consumes a large amount of energy from the constituent sensor nodes. Time-based Dynamic Keying and En-Route Filtering (TICK) can reduce the communication costs by utilizing local time values of the en-route nodes to generate one-time dynamic keys that are used to encrypt reports in a manner that further avoids the regular keying or re-keying of messages. Although TICK is more energy efficient, it employs no re-encryption operation strategy that cannot determine whether a healthy report might be considered as malicious if the clock drift between the source node and the forwarding node is too large. Secure SOurce-BAsed Loose Synchronization (SOBAS) employs a selective encryption en-route in which fixed nodes are selected to re-encrypt the data. Therefore, the selection of encryption nodes is non-adaptive, and the dynamic network conditions (i.e., The residual energy of en-route nodes, hop count, and false positive rate) are also not focused in SOBAS. We propose an energy efficient selection of re-encryption nodes based on fuzzy logic. Simulation results indicate that the proposed method achieves better energy conservation at the en-route nodes along the path when compared to TICK and SOBAS.

• The Journal of Information Technology
• /
• v.7 no.3
• /
• pp.11-18
• /
• 2004

Learning procedure in the neural network is updating of weights between neurons. Unadequate initial learning coefficient causes excessive iterations of learning process or incorrect learning results and degrades learning efficiency. In this paper, adaptive learning algorithm is proposed to increase the efficient in the learning algorithms of Self-Organization Neural Networks. The algorithm updates the weights adaptively when learning procedure runs. To prove the efficiency the algorithm is experimented to classification of strokes which is the reference handwritten character. The result shows improved classification rate about 1.44~3.65% proposed method compare with Kohonan and Mao's algorithms, in this paper.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.67-69
• /
• 2007

PMSM (Permanent Magnet Synchronous Motor) current control is a most inner loop of electromechanical driving systems and it plays a foundation role in the hierarchy's control loop of several mechanical machine systems. In this paper, a simple RMRAC control scheme for the PMSM is proposed in the synchronous frame. In the synchronous current model, the input signal is composed of as a calculated voltage by adaptive laws and system disturbances. The gains of feed-forward and feed-back controller are estimated by the proposed e-modification methods respectively, where the disturbances are assumed as filtered current tracking errors. After the estimation of the disturbances from the tracking errors, the corresponding voltage is fed forward to control input to compensate for the disturbances. The proposed method is robust to high frequency disturbances and has a fast dynamic response to time varying reference current trajectory. It also shows a good real-time performance duo to it's simplicity of control structure. Through the simulations considering several cases of external disturbances and experimental results, efficiency of the proposed method is verified

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.7
• /
• pp.1706-1715
• /
• 1996

The decision feedback equalizer(DFE) received recent attention since it can compensate for channels with severe intersymbol interference(ISI) without as much noise enhancement as the linear equalizer(LE). In this paper, we propose a new DFE which can icrease the performance of DFE further by using error feedback. The performance increase is achieved by reducing correlation of error signal, which cannot be reduced by the feedforward or feedback filter. Hardware complexity for the proposed approcach is minimal since it requires only additional few taps to the conventional DFE. Based on theoretical analysis and computer simulations, the proposed approach is shown to be much more effective than the conventional DFE, especially for channels with large ISI.

• Journal of Communications and Networks
• /
• v.13 no.4
• /
• pp.319-326
• /
• 2011

Beamforming techniques have been successfully utilized for traffic channels in order to solve the interference problem. However, their use for control channels has not been sufficiently investigated. In this paper, a (semi-) centralized beamforming strategy that adaptively changes beam patterns and controls the total transmit power of cells is proposed for the performance enhancement of the common channel in hierarchical cell structure (HCS) networks. In addition, some examples of its practical implementation with low complexity are presented for two-tier HCS networks consisting of macro and pico cells. The performance of the proposed scheme has been evaluated through multi-cell system-level simulations under optimistic and pessimistic interference scenarios. The cumulative distribution function of user geometry or channel quality has been used as a performance metric since in the case of common control channel the number of outage users is more important than the sum rate. Simulation results confirm that the proposed scheme provides a significant gain compared to the random beamforming scheme as well as conventional systems that do not use the proposed algorithm. Finally, the proposed scheme can be applied simultaneously to several adjacent macro and pico cells even if it is designed primarily for the pico cell within macro cells.

• Earthquakes and Structures
• /
• v.5 no.3
• /
• pp.261-276
• /
• 2013

Oil, hysteretic and inertial mass dampers are representatives of passive dampers used for smart enhancement of seismic performance of building structures. Since oil dampers have a nonlinear relief mechanism and hysteretic dampers possess nonlinear restoring-force characteristics, several difficulties arise in the evaluation of buildings including such dampers. The purpose of this paper is to propose a practical method for simultaneous optimal use of such dampers. The optimum design problem is formulated so as to minimize the maximum interstory drift under design earthquakes in terms of a set of damper quantities subject to an equality constraint on the total cost of dampers. The proposed method to solve the optimum design problem is a successive procedure which consists of two steps. The first step is a sensitivity analysis by using nonlinear time-history response analyses, and the second step is a modification of the set of damper quantities based upon the sensitivity analysis. Numerical examples are conducted to demonstrate the effectiveness and validity of the proposed design method.