• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.4
• /
• pp.379-385
• /
• 2020

The satellite employs an adaptive beamformer to efficiently detect various signals and to suppress multiple interference signals, simultaneously. Although the adaptive beamforming satellite system needs Angle-of-Arrival (AOA) information of the desired signal, it is difficult to estimate the signal AOAs on the satellite environment. However, the AOA estimation on the ground control tower is more efficient and accurate comparing to the satellite environment. In this paper, we propose an adaptive beamforming satellite system based on the signal location information on the ground, consisting on an angle estimator, an adaptive beamformer, and signal processing & D/B unit. The ground control tower estimates the accurate location of the signal source, and it sends the estimated coordinates of the desired signal to the satellite. The angle estimator mounted on the satellite calculates the desired signal AOA, based on the signal location information transmitted from the ground control center. The satellite beamformer detects the desired signal and suppresses unwanted signals based on the signal AOA calculated by the angle estimator. We provide computer simulation results to present the performance of the proposed satellite adaptive beamforming system based on the signal location information.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.8
• /
• pp.16-22
• /
• 1993

As a method of separating the signal arriving from a desired direction in the presence of noise and interfering signals, a linearly constrained adaptive beamformer based on the escalator (Gram-Schmidt) structure is presented. The weights are chosen to minimize local output power subject to the response constraint. The performances of the proposed escalator adaptive beamformer are compared with those of cascade adaptive beamformer via computer simulations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.4
• /
• pp.448-458
• /
• 2013

In this paper, we present the performance and the experimental results of the adaptive beamformer in the radar system with the planar active array. The study of the adaptive beamformer has already been performed in several literatures, but it is difficult to find the results or examples those are implemented in the actual radar system. Here we employ the adaptive beamformer to the practical radar system with subarray architecture. The performance of beamformer will be demonstrated by modeling and simulation and finally the far-field experimental results.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.5
• /
• pp.777-782
• /
• 2017

The Signal Intelligence (SIGINT) system based on the adaptive beamformer, comprised of the AOA estimator followed by the interference canceller, is a cutting edge technology for collecting various signal information utilizing all sorts of devices such as the radar and satellite. In this paper, we present the efficient adaptive SIGINT structure consisted of an AOA estimator and an adaptive beamformer. For estimating AOA information of various signals, we employ the Multiple Signal Classification (MUSIC) algorithm and for efficiently suppressing high-power interference signals, we employ the Minimum Variance Distortionless Response (MVDR) algorithm. Also, we provide computer simulation examples to verify the performance of the presented adaptive beamformer structure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.6B
• /
• pp.1127-1135
• /
• 2000

The beamforming procedure in Adaptive Array Antenna System is affected by signal degradation and data rate due to DS-CDMA characteristics. Until this time, a lot of techniques are suggested to overcome this problems. This paper shows the simulation result about the beamforming performance of symbol level system that process slow data rate, compensated signal by despreading procedure in front of beamformer, and that of chip level system that process chip level signal without it. we analysis the performance using MSE, beam pattern, scattering points of beamformer output. chip level system is superior to symbol level system in time varying channel, while the performance of them didn't have difference in static channel.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.4
• /
• pp.424-434
• /
• 2015

Adaptive beamforming algorithms have been widely used to remove interference and jamming in the phased array radar system. Advances in the field programmable gate array(FPGA) technology now make possible the real time processing of adaptive beamforming (ABF) algorithm. In this paper, the FPGA based real-time implementation method of adaptive beamforming system(beamformer) in the pre-processor module for active electronically scanned array(AESA) radar is proposed. A compact FPGA-based adaptive beamformer is developed using commercial off the shelf(COTS) FPGA board with communication via OpenVPX(Virtual Path Cross-connect) backplane. This beamformer comprises a number of high speed complex processing including QR decomposition & back substitution for matrix inversion and complex vector/matrix calculations. The implemented result shows that the adaptive beamforming patterns through FPGA correspond with results of simulation through Matlab. And also confirms the possibility of application in AESA radar due to the real time processing of ABF algorithm through FPGA.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.6
• /
• pp.446-452
• /
• 2004

Under the condition of a common narrowband target signal and interference signals from several directions, the linearly constrained minimum variance (LCMV) method using the generalized sidelobe canceller (GSC) for adaptive beamforming has been exploited successfully However, in the case of wideband signals, the length of the adaptive filter must be extended. As a result, the complexity of the beamformer increases, which makes real-time implementation difficult. In this paper, we improve the convergence characteristics of the adaptive filter using the transform domain normalized least mean square (NLMS) approach based on the subband GSC structure without the increase of complexity. Besides, the M-MAX algorithm, which is one of various selective coefficient updating methods, is employed in order to remarkably reduce the computational cost without decreasing the convergence quality. With the combination of these methods, we propose a computationally efficient wideband adaptive beamformer and verify its efficiency through a series of simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4A
• /
• pp.399-406
• /
• 2011

Adaptive beamformers, which utilize a priori information on the arrival angle of the desired signal. suppress interferences while maximizing their gains in the desired signal direction. However, if there exist errors in the direction information, they can suffer from severe performance degradation since the desired signal is treated as an interference. A robust adaptive beamforming method is presented which exploits the signal-blocking structure of the Duvall beamformer. The proposed method finds an interference signal space directly from correlations of received signals and then obtains a weight vector such that it is orthogonal to the space. Applying the weight vector to two sub arrays which consist of one less sensors than the original uniform lineal array (ULA), the beamformer efficiently estimates the arrival angle of the desired signal. Its computational complexity is lower than existing methods, which require matrix inversion or eigendecomposition.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.190-193
• /
• 2003

The DOA(Direction Of Arrival) estimation to select a best beam for receiving a particular signal in switched beam antenna systems, and to shape the optimal beam in adaptive array antenna systems, is typically performed under the assumption that the target user motion is almost negligible. In this paper, we model the user as the time-varying source and adopt the LPA(Local Polynomial Approximation) tracking algorithm, proposed by Katkovnik, to solve the time-varying DOA estimation problem. Then, we compare the power spectrum functions between the LPA beamformer and the conventional beamformer, also, the normalized SNRs of each beamformer. The results show that the LPA beamformer is robuster than the conventional beamformer in tine-varying environments. In addition, in case of the conventional beamformer, more array elements give rise to more degradation in the aspect of SNR.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.2 s.332
• /
• pp.49-59
• /
• 2005

An adaptive hybrid beamformer is proposed to improve the reception performance of the advanced television system committee (ATSC) digital television (DTV) in a mobile environment. Dynamic multipaths and Doppler shifts severely degrade the reception performance of the ATSC DTV receiver. Accordingly, a hybrid beamformer, called a Capon and least mean square (CLMS) beamformer, is presented that uses direction of arrival (DOA) information and the least mean square (LMS) beamforming algorithm. The proposed CLMS algerian efficiently removes dynamic multipaths and compensates for the phase distortion caused by Doppler shifts in mobile receivers. After the CLMS beamformer is operated, the subsequent use of an equalizer removes any residual multipath effects, thereby significantly improving the performance of DTV receivers. The performances of the proposed CLMS, Capon, and LMS beamformersare compared based on computer simulations. In addition, the overall performance of the CLMS beamformer followed by an equalizer is also considered.