• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4B
• /
• pp.184-191
• /
• 2008

NanoQplus, which is an embedded operating system for wireless sensor networks (WSNs) and developed by Electronics and Telecommunications Research Institute (ETRI), provides programmer-friendly preemptive multi-threading programming technique, but it has poor network protocol stack, as compared to TinyOS, one of the famous operating systems for WSNs. In this paper, we apply dynamic MANET on-demand routing (DYMO) protocol, which is being standardized in Internet Engineering Task Force (IETF), to NanoQplus. Since DYMO has been proposed for mobile ad-hoc networks (MANETs) and MANETs have less resource restrictions than WSNs, the basic DYMO protocol cannot be applied to WSNs without modifications. Moreover, coherence with MAC protocol should be considered in order to eliminate redundant data between MAC and network layers. Thus, we propose a modified version of the basic DYMO protocol for NanoQplus. The experimental results from a real sensor network test-bed show that the DYMO implementation using NanoQplus works efficiently in WSNs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.2C
• /
• pp.188-195
• /
• 2012

Many systems are developing for the realization of NCW(Network Centric Warfare). UAV(Unmanned Aerial Vehicle) Network is attracting attention in a lot of military applications. In general, UAVs have the potential to create an ad-hoc network and greatly reduce the hops from source to destination. However, UAV networks exhibit unique properties such as high mobility, high data rate, and real time service. The routing protocols are required to design the multi-hop routing protocols that can dynamically adapt to the requirements of UAV network. In this paper we analyse Geographic Routing Protocol is based on geographical distance between source and destination for efficient and reliable transmission. Geographic Routing Protocol is evaluated in video service scenarios with TDMA model in our simulation. The simulation results show that the performance of Geographic Routing Protocol is better than the MANET Routing Protocol in terms of packet received ratio, end to end delay, and routing traffic sent.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9A
• /
• pp.801-808
• /
• 2011

We propose MBAP(Multi-rate Broadcast Active Probing) technique to get the right measurements for link quality in Wireless Mesh Network (WMN). Most routing protocols for WMN make use of link quality-aware routing metrics, such as ETX(Expected Transmission Count) and ETT(Expected Transmission Time), while the hop count is usually used in MANET (Mobile Ad-hoc NETwork). A broadcast based active proving technique is adopted in the previous studies to get the ETX or ETT of a link. However this technique does not reflect the multi-rate feature of WLAN because it uses a single fixed transmission rate for broadcast which usually differs from the actual rate used in data transmissions. MBAP overcomes this shortage by exploiting various rate broadcast frames for probing. We implement MBAP on linux system by modifying WLAN driver and related kernel sub-systems. Experimental results show that MBAP can capture link quality more accurately than the existing techniques.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10B
• /
• pp.955-963
• /
• 2009

In this paper, we propose a medium access control(MAC) protocol for reducing the energy efficiency and for improving the transmission efficiency in underwater acoustic sensor networks. In underwater environment, the transmission delay is longer and bandwidth is smaller than terrestrial environment. Considering these points, we propose a new MAC protocol to enhance throughput and to manage efficiently the energy of nodes. The proposed protocol operates as a channel reservation scheme to decrease data collisions, and uses a mechanism to control the hidden node problem and the exposed node problem occurred in ad hoc networks. The proposed protocol consists of the slotted based transmission frame and reduces data collisions between nodes by putting separately the reservation period in the transmission frame. In addition, it is able to solve the hidden node problem and the exposed node problem by reservation information between nodes. We carry out the simulation to evaluate the proposed protocol in terms of the average energy consumption, the ratio of collision, throughput, and the average transmission delay, and compare the proposed protocol to a traditional MAC protocol in the underwater environment. The simulation results show that the proposed protocol outperforms the traditional protocol under a various of network parameters.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11B
• /
• pp.1607-1617
• /
• 2010

In this paper we propose MA-CBRP, mesh adaptive algorithm for wireless mesh networks. MA-CBRP is a hybrid algorithm based on ad-hoc CBRP protocol. In MA-CBRP, the mesh router periodically sends the ANN message as like Hello-message in CBRP. ANN message allows to all clients periodically store a route towards the mesh-router and renewal information in their routing cache. While CBRP periodically reply Hello-message, MA-CBRP does not reply to achieve less overhead. After receiving ANN message, mesh client send JOIN message to mesh router when the route towards mesh router changed. at the same time Register the entry to mesh router, it can achieve to reduce overhead of control the route and shorten the time to find route. consequently, MA-CBRP shows 7% reduced overhead and shortened time to find route than CBRP with regardless of clients number.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12A
• /
• pp.1226-1237
• /
• 2007

This paper proposes QoS mesh routing protocol for IEEE 802.16 based wireless mesh networks. QoS mesh routing protocol proposed in this paper is a proactive hop-by-hop QoS routing protocol. The goal of our routing protocol is not only to find a route from a source to a destination, but also optimal route that satisfies QoS requirements, given in terms of bandwidth and delay as default QoS parameters. In this paper, we first analyze possible types of routing protocols that have been studied for MANET and show proactive hop-by-hop routing protocols are the most appropriate for wireless mesh networks. Then, we present a network model for IEEE 802.16 based wireless mesh networks and propose a proactive hop-by-hop QoS routing protocol. Through our simulation, we represent that our routing protocol outperforms QOLSR protocol in terms of end-to-end delay, packet delivery ratio and routing overhead.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.2
• /
• pp.155-162
• /
• 2010

To ensure accurate measurements of wireless network performance, it should be collected real-time data which are transmitted between a large number of nodes in the actual network environment. Therefore, it is necessary to develop simulation tool for finding optimal network system design method such as media access control, routing technique, ad-hoc algorithm of node deployment while overcoming spatial and temporal constraints. Our research attempts to provide an improved architecture and design method of simulation tool for wireless network is an application of multi-threading technique in these issues. We finally show that usability of the proposed simulator by comparing results derived from same test environment in the wireless LAN model of our simulator and widely used network simulation package, NS-2.

• Corrosion Science and Technology
• /
• v.15 no.5
• /
• pp.217-225
• /
• 2016

Linear polarization resistance (LPR) testing of soils has been used extensively by a number of water utilities across Australia for many years now to determine the condition of buried ferrous water mains. The LPR test itself is a relatively simple, inexpensive test that serves as a substitute for actual exhumation and physical inspection of buried water mains to determine corrosion losses. LPR testing results (and the corresponding pit depth estimates) in combination with proprietary pipe failure algorithms can provideauseful predictive tool in determiningthe current and future conditions of an asset. Anumber of LPR tests have been developed on soil by various researchers over the years1), but few have gained widespread commercial use, partly due to the difficulty in replicating the results. This author developed an electrochemical cell that was suitable for LPR soil testing and utilized this cell to test a series of soil samples obtained through an extensive program of field exhumations. The objective of this testing was to examine the relationship between short-term electrochemical testing and long-term in-situ corrosion of buried water mains, utilizing an LPR test that could be robustly replicated. Forty-one soil samples and related corrosion data were obtained from ad hoc condition assessments of buried water mains located throughout the Hunter region of New South Wales, Australia. Each sample was subjected to the electrochemical test developed by the author, and the resulting polarization data were compared with long-term pitting data obtained from each water main. The results of this testing program enabled the author to undertake a comprehensive review of the LPR technique as it is applied to soils and to examine whether correlations can be made between LPR testing results and long-term field corrosion.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2017.11a
• /
• pp.129-129
• /
• 2017

In planning and evaluating government R&D programs, one of the first steps is to understand the government's current R&D investment portfolio - which fields or topics the government is now investing in in R&D. Analysis methods of an investment portfolio of government R&D tend traditionally to rely on keyword searches or ad-hoc two-dimensional classifications. The main drawback of these approaches is their limited ability to account for the characteristics of the whole government investment in R&D and the role of individual R&D program in it, which tends to depend on the relationship with other programs. This paper suggests a new method for mapping and analyzing government investment in R&D using a combination of methods from natural language processing (NLP) and network analysis. The NLP enables us to build a network of government R&D programs whose links are defined as similarity in R&D topics. Then methods from network analysis show the characteristics of government investment in R&D, including major investment fields, unexplored topics, and key R&D programs which play a role like a hub or a bridge in the network of R&D programs, which are difficult to be identified by conventional methods. These insights can be utilized in planning a new R&D program, in reviewing its proposal, or in evaluating the performance of R&D programs. The utilized (filtered) Korean text corpus consists of hundreds of R&D program descriptions in the budget requests for fiscal year 2017 submitted by government departments to the Korean Ministry of Strategy and Finance.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.1
• /
• pp.76-90
• /
• 2010

Location Service is required in position-based routing for VANET to provide position information. We propose Grid-based Location service spot(GLSS) scheme for optimized routing path to improve accessibility and load balance in location service. Specific area is defined as Location service spot(LSS) on each grid in this scheme, and all nodes in the grid geocast its location update message and location request message to each LSS. Location request messages are flooded throughout LSSs, location reply messages establish optimized route from the source grid to the destination grid. We evaluated GLSS which establishes optimized route on the grid comparing GPSR in consideration of road condition and geographical features.