• Journal of Korea Multimedia Society
• /
• v.13 no.6
• /
• pp.849-864
• /
• 2010

This paper proposes a multipath routing protocol called cross-layer multipath AODV (CM-AODV) for wireless ad hoc networks, which selects multiple routes on demand based on the signal-to-interference plus noise ratio (SINR) measured at the physical layer. Note that AODV (Ad hoc On-demand Distance Vector) is one of the most popular routing protocols for mobile ad hoc networks. Each time a route request (RREQ) message is forwarded hop by hop, each forwarding node updates the route quality which is defined as the minimum SINR of serialized links in a route and is contained in the RREQ header. While achieving robust packet delivery, the proposed CM-AODV is amenable to immediate implementation using existing technology by neither defining additional packet types nor increasing packet length. Compared to the conventional multipath version of AODV (which is called AOMDV), CM-AODV assigns the construction of multiple paths to the destination node and makes it algorithmically simple, resulting in the improved performance of packet delivery and the less overhead incurred at intermediate nodes. Our performance study shows that CM-AODV significantly outperforms AOMDV in terms of packet delivery ratio and average end-to-end delay, and results in less routing overhead.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.169-175
• /
• 2011

This paper addresses mobile IP router which communicate between nodes in Ad Hoc network as well as supply attachment to outer Internet. Ad Hoc network is one which exchanges information through cooperations among nodes without wire infrastructure, mobile IP router considers the network as one mobile unit, and supports Internet connection in mobile as well as fixed spaces. Therefore, this router can accommodate the routing of Ad Hoc network, and provide nodes in Ad Hoc network with Internet connection. So mobile IP router can provide Ad-Hoc terminals with the diverse wireless services, such as Internet connection service, routing, mobility, and so on.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.590-593
• /
• 2011

Time goes on, Ad Hoc network is hot issues. So far, there are a lot of protocols have been proposed for Ad Hoc routing protocol to support the mobility. This paper presents an enhanced DSDV(Destination-Sequenced Distance Vector) routing protocol which nominates one node to take care of a specific area. Simply Area-Aware(AA) DSDV routing protocol has one nominee to take care of some area. It has two jobs. One is to take care of its neighbour and another is to transfer the routing table to its other node as it works. It is called as Area Nominee(AN). The new scheme extends the routing table to include the nominee in the area. The general node is the same as the previous DSDV routing protocol. In the other hands, the node which is nominated has two routing protocols. One is for Regional Routing(RR) table which is the same routing table in DSDV. Another is Global Routing(GR) table which is about the area round its area which it cares nearby. GR table is the table for the designated node like the nominee. Each area has one nominee to transfer between ANs. It has only nominee's information about every area. This concept decreases the topology size and makes the information of topology more accurate.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.2
• /
• pp.208-213
• /
• 2003

Recently, a variety of new routing protocols targeted specifically wireless mobile nodes environment have been developed. This paper presents the results of a detailed packet level simulation comparing two multi-hop wireless ad-hoc network routing protocols that cover a range of design choices between DSDV and DSR. And we suggest a performance comparison of network routing protocols through NS-2 simulator.

• The KIPS Transactions:PartC
• /
• v.11C no.7 s.96
• /
• pp.905-916
• /
• 2004

Self-organizing hierarchical ad hoc network (SOHAN) is a new ad-hoc network architecture designed to improve the scalability properties of conventional 'flat' ad hoc networks. This network architecture consists of three tiers of ad-hoc nodes, i.e.. access points, forwarding nodes and mobile nodes. This paper presents a topology discovery and routing protocol for the self-organization of SOHAN. We propose a cross-layer path metric based on link quality and MAC delay which plays a key role in producing an optimal cluster-based hierarchical topology with high throughput capacity. The topology discovery protocol provides the basis for routing which takes place in layer 2.5 using MAC addresses. The routing protocol is based on AODV with appropriate modifications to take advantage of the hierarchical topology and interact with the discovery protocol. Simulation results are presented which show the improved performance as well as scalability properties of SOHAN in terms of through-put capacity, end-to-end delay, packet delivery ratio and control overhead.

• Journal of the Korea Society for Simulation
• /
• v.13 no.4
• /
• pp.55-69
• /
• 2004

In MANET(Mobile Ad-hoc Network), unlike in wired networks, a path configuration should be in advance of data transmission along a routing path. Frequent movement of mobile nodes, however, makes it difficult to maintain the configured path and requires re-configuration of the path very often. It may also leads to serious problems such as deterioration of QoS in mobile ad-hoc networks. In this paper, we proposed a Reactive Routing Keyword (RRK) routing procedure to solve those problems. Firstly, we noticed it is possible in RRK routing to assign multiple routing paths to the destination node. We applied this feature into active networks and SNMP information based routing by storing unique keywords in cache of mobile nodes corresponding to present and candidate routings in a path configuration procedure. It was shown that the deterioration of QoS which may observed in Dynamic Source Routing(DSR) protocol was greatly mitigated by using the proposed routing technique.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.1
• /
• pp.31-37
• /
• 2008

In this paper, we propose an entropy-based routing protocol to effectively support both stable route construction and route lifetime in Mobile Ad-hoc Wireless Sensor Networks (MAWSN). The basic idea and feature of the proposed routing protocol are as follows. First, we construct the stable routing routes based on entropy concept using mobility of mobile nodes. Second, we consider a realistic approach, in the points of view of the MAWSN, based on mobile sensor nodes as well as fixed sensor nodes in sensor fields while the conventional research for sensor networks focus on mainly fixed sensor nodes. The performance evaluation of the proposed routing protocol is performed via simulation using OPNET(Optimized Network Engineering Tool) and analysis. The results of the performance evaluation show that the proposed routing protocol can efficiently support both the construction of stable route and route lifetime in mobile ad-hoc wireless networks.

• Journal of IKEEE
• /
• v.5 no.1 s.8
• /
• pp.59-66
• /
• 2001

In this paper, we propose a dynamic source routing protocol supporting asymmetric paths for mobile Ad Hoc networks that contain unidirectional links. At present, the existing dynamic source routing protocol supports only symmetric paths that consist of bidirectional links for routing. However, in fact, there can exist unidirectional links due to asymmetric property of mobile terminals or current wireless environment. Thus, we implement a mobile Ad Hoc routing protocol supporting unidirectional links, which is fit for more general wireless environment. Especially, the proposed protocol uses an improved multipath maintenance method in order to perform rapid route reconfiguration when route error due to mobility is detected. For performance evaluation, we consider the following factors: average route discovery time and average data reception rate. In order to obtain the factors of the performance evaluation, we did simulation for 900 seconds in the step of 100 seconds with the following scenarios: usage of route cache in intermediate nodes on route path, and different mobility/connection patterns.

• Convergence Security Journal
• /
• v.21 no.1
• /
• pp.129-135
• /
• 2021

Greedy protocols show good performance in Vehicular Ad-hoc Networks (VANETs) environment in general. But they make longer routes causing by surroundings or turn out routing failures in some cases when there are many traffic signals which generate empty streets temporary, or there is no merge roads after a road divide into two roads. When a node selects the next node simply using the distance to the destination node, the longer route is made by traditional greedy protocols in some cases and sometimes the route ends up routing failure. Most of traditional greedy protocols just take into account the distance to the destination to select a next node. Each node needs to consider not only the distance to the destination node but also the direction to the destination while routing a packet because of geographical environment. The proposed routing scheme considers both of the distance and the direction for forwarding packets to make a stable route. And the protocol can configure as the surrounding environment. We evaluate the performance of the protocol using two mobility models and network simulations. Most of network performances are improved rather than in compared with traditional greedy protocols.

• Journal of Korea Multimedia Society
• /
• v.13 no.2
• /
• pp.258-264
• /
• 2010

In the Ad-hoc networks, the limitation on the availability of power for operation is a significant bottleneck, given the requirements of portability, weight, and size of mobile devices. Hence, the use of routing metrics that consider the capabilities of the power sources of the network nodes contributes to the efficient utilization of energy. This paper presents a QoS routing protocol that minimize the power consumed by a packet in traversing from source node to the destination node. Results obtained of simulation show that, with our approach we can reduce the power consumption of nodes and increases the life time of the network.