• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.4
• /
• pp.316-322
• /
• 2017

The primary objective of the current study is to develop outstanding hull form on resistance performance by using numerical analysis code. Model tests were conducted to assess the resistance performance of the developed hull form. The investigation of an existing vessel was performed for validating the actual ship design based on the drawing. The operating displacement and speed were mainly confirmed through investigation of the existing vessel. The resistance performance of the existing vessel was analyzed using numerical code. The developed vessel was derived through studies on wave improvement of the bow shoulder, the balance of displacement distribution, the modification of the frame shape, and the size and shape change of the center skeg. Based on the results of a computational fluid dynamics analysis, the resistance performance of the developed vessel showed an improvement of 15% over the existing vessel at a speed of 11 knots. Resistance tests were conducted to evaluate the performance of the existing vessel and the developed vessel in the towing tank. Finally, the effective horsepower of the developed vessel showed an improvement of 17% over the existing vessel.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.71-76
• /
• 2005

Many sea accidents such as collisions and groundings of vessels were occurred due to the lack of sufficient manoeuvring capability of vessels. Therefore IMO adopted 'The interim standards of ship manoeuvrability by Resolution A.751(18) and the standards have been applied to vessels of 100m or more in length and all chemical tankers and gas carriers regardless of the length, which were constructed on or after 1 July 1994. The IMO manoeuvrability standards are divided into three kinds as bellows; (1) Turning capability standards : Estimated values in design stage are to be certified by turning circle test of the actual vessel. (2) Course keeping quality standards : Estimated values in design stage are to be certified by $10^\sqsubset\;and\;20^\sqsubset$ Zig-Zag tests of the actual vessel. (3) Shortest stopping distance standards : Estimated values in design stage are to be certified by the shortest stopping distance tested by the actual vessel. In this paper, the authors computed the values of the manoeuvring standards of several vessels from their original design and compared them with those results from experiments of the model ships and also examined the values and concluded about the validity of IMO Manoeuvrability standards.

• Journal of Navigation and Port Research
• /
• v.29 no.5 s.101
• /
• pp.365-370
• /
• 2005

Many sea accidents such as collisions and groundings of vessels were occurred due to the lack of sufficient manoeuvring capability of vessels. Therefore IMO adopted 'The interim standards of ship manoeuvrability by Resolution A.751(18)' and the standards have been applied to vessels of 100m or more in length and all chemical tankers and gas carriers regardless qf the length, which were constructed on or after 1 July 1994. The IMO manoeuvrability standards are divided into three kinds as bellows; (1) Turning capability standards : Estimated values in design stage are to be certified by turning circle test of the actual vessel. (2) Course keeping quality standards : Estimated values in design stage are to be certified by $10^{\circ}\;and\;20^{\circ}$ Zig-Zag tests of the actual vessel. (3) Shortest stopping distance standards : Estimated values in design stage are to be certified by the shortest stopping distance tested by the actual vessel. In this paper, the authors computed the values of the manoeuvring standards of several vessels from their original design and compared them with those results from experiments of the model ships and also examined the values and concluded about the validity of IMO manoeuvrability standards.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.9
• /
• pp.1012-1019
• /
• 2012

In this study, CNG composite vessel is analyzed by using coupled model with liner and composite layer. For the coupled model, a method using theoretical analysis and FEA is suggested: elastic solution for laminated tube is used for theoretical analysis of the composite vessel, FEA is performed to the model of CNG composite vessel in actual conditions. On the basis of these results, optimal thickness and winding angle of the composite layer considering the material properties and thickness of the liner are determined. The results of theoretical analysis and FEA are compared with those carried out in previous studies for verifying the suggested analysis method.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.199-212
• /
• 2020

A large percentage of maritime accidents in coastal seas are related to small fishing vessels. In order to investigate causes of maritime accidents, it is often necessary to carry out dynamic simulations for the estimation of trajectories and motions of vessels. Initial conditions of vessels such as main dimensions, loading conditions and hydrostatic properties are required for the accurate simulations. Small fishing vessels usually have few records of hydrostatic properties during their fishing operations. Therefore, in this study, estimation procedures for hydrostatic properties of small fishing vessels are proposed. At first, hull form characteristics of Korean small fishing vessels are investigated. Most of vessels have hard-chines and centerline skegs, they have similar hull forms. Bonjean curves of several small fishing vessels whose gross tonnages are below 10 tons are normalized with vessel breadths and depths. Representative bonjean curves are derived from normalized bonjean curves, and a representative hull plan is obtained as well. If the vessel loading conditions such as total weights and centers of gravity are given, fore and aft drafts can be calculated by using the representative bonjean curves with the constraint that weights and buoyancies are in equilibrium. Metacentric heights are also estimated by using the representative hull plan. Drafts and metacentric heights estimated by proposed iterative estimation procedures are compared with actual vessel data, estimated values are in good agreements with actual values. In addition, normalized fore and aft drafts, metacentric heights of vessels can be formulated as the linear functions of normalized total weights and centers of gravity. Empirical formulas of drafts and metacentric heights are proposed, and it is confirmed that the empirical formulas also provide reasonable results, which are similar to the results by iterative estimation procedures with representative bonjean curves and hull plan.

• Journal of Navigation and Port Research
• /
• v.40 no.5
• /
• pp.249-256
• /
• 2016

The International Association of Marine Aids to Navigation and Lighthouse Authorities(IALA) model course recommends specific aspects of basic curriculums for Vessel Traffic Services(VTS) operator education such as modules, course hours, contents, etc. Most domestic training programs for newly appointed VTS operators comply with such recommendations. The objective of this study is to determine whether such modules for VTS operator training recommended by the current IALA model course correspond to the actual opinions of VTS operators who are currently working in the field. To this end, the relative importance of basic modules for vessel traffic services operator training was analyzed using the Analytic Hierarchy Process(AHP) method. A questionnaire was designed to include 8 modules recommended by the IALA model course, and the survey results of 52 individuals working at 5 VTS centers were analyzed. The result showed that, unlike the assumption by the IALA, domestic VTS operators viewed Nautical Knowledge as the most important modules, followed by Emergency Situations, Traffic Management, Language, Equipment, VHF Radio, Communication Co-ordination, and Personal Attributes, in that order.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.498-503
• /
• 2009

This paper presents the vibration problem of the Engine Casing (E/C) "B" deck in the handymax vessel and describes a method to avoid resonance. The first ship of the series did not have any vibration issue on the "B" deck. However, resonance condition occurred when additional machine was installed to the following vessels. To understand the dynamic characteristics of the deck, the normal mode analysis and impact test have been performed. Within the normal operating range of the vessel, the $1^{st}$ natural frequency of the E/C "B" deck is close to the main engine's $6^{th}$ order. Based on these analysis, a reinforcement on the deck was suggested and it proved to be effective. Since actual impact test after the reinforcement also confirmed the resonance avoidance.

• Transactions of the Korean hydrogen and new energy society
• /
• v.34 no.1
• /
• pp.32-37
• /
• 2023

In this study, in order to propose a integrity evaluation for type IV high aspect ratio hydrogen storage vessel, a numerical analysis of the hoop tensile test and pressure test was performed using FEM software, and the results of the actual physical property test were reviewed. The property test and numerical analysis were compared, and very similar results were obtained with deviations of maximum tensile strength of 4.75% and fiber direction stress of 5.39%.

• Journal of the Korean Institute of Navigation
• /
• v.7 no.1
• /
• pp.33-62
• /
• 1983

A navigator on bridge needs to know every kinds of motion characteristics of his vessel at sea. Generally when a vessel is completely built, the shipyard makes turning circle diagrams from the results of turing circle tests made during the sea trials for the reference of the vessel's owner. But referring only the data of a turning circle diagram, an officer on bridge can not figure out his vessel's maneuvering characteristics sufficiently, So nowadays the shipyard often adds Z test to turning circle test for more detail references. In this paper the author made Z and turning circle tests at the rudder angles of 15 and and 35 degress separately and in each of the case made a turrning circle diagram from the results of the turning circle test and the esults numerically calculated from mathematical formula made on the base of the maneuvering indices got from the Z test and compared them each other for the purpose of finding the correlations between them. Followings are concluded from the results. An actual turning circle diagram and a calculated one from the results of the Z test at same rudder angle coincides each other well when the center of the calculated circle is transferred by 1.7B toward the direction of the initial turning perpendicularly to the original course and 0.5L toward the direction in parallel with original course in case of the rudder angle of 35 degrees and 1.2B and 0.3L toward each of the above mentioned directions in case of rudder angle of 15 degrees.

• The Journal of Fisheries Business Administration
• /
• v.42 no.2
• /
• pp.97-112
• /
• 2011

The coastal and offshore fishery to manage from a fishery permit system in our country at present seems to be a sign of lots problem, which are illegal fishing, a permit rent, non fishing vessel the purpose of vessel reduction, fishery compensation, tax exemption oil, the excessive occurrence of administrative cost due to differences during a period of a fishery permit. All the readjustment system for the permit has suggested an effective solution for a fishery permit management, the maintenance of a fishery order(the prevention of illegal fishery), the prevention of unused fishery, the entrance of new vessel in coastal fishery and it's system has prevent this problems in ahead. This paper has estimated an prevention convenience for an illegal spill of the tax exemption oil, actual effects of vessel reduction, the conservation of fishery resource for the future value and carried out an economic analysis to estimate compliance cost for the system introduction. Also, this study have analyzed throughly the coastal fishery situation and catched lots of issues on the management for the permit system. Especially, the problems improving the readjustment introduction for the permit have estimated the social and economic effects quantitatively and qualitatively with a calculated technique to classify various scenarios. This paper has judged correctly the term of validity for the permit to shorten as a result of the estimation and it will be to take the net convenience cost 1,655thousand million won. The results of this study have expect to provide a basic data to introduce the readjustment system for the permit.