• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.6
• /
• pp.49-56
• /
• 1999

The effects of the internal flow in a D.I. Diesel injection nozzle on the atomization of a spray were analyzed experimentally. Flow visualization studies were made using a transparent acrylic model nozzle as a diesel nozzle . Water instead of disel fuel was used as the injection liquid. The geometry of the model nozzle was scaled up 10 times of the actual nozzle and the injection pressure for the model nozzle was adjusted so as to achieve a Reynolds number at the discharge hole that was the same as the actual nozzle. Experimental results show that when the needle lift was small, the high turbulence in the sac chamber generated by the high velocity seat flow made the spread angle of the spray plume large. Cavitation, which arose from the sac chamber, makes the spread angle of the spray plume large but the discharge coefficient small.

• Journal of Korean Society on Water Environment
• /
• v.23 no.5
• /
• pp.577-580
• /
• 2007

The influence of flow rate has been investigated on the treatment efficiency of continuous cycling electrolytic process employing artificial and actual photographic wastewater which containing silver ion. For artificial wastewater, the treatment efficiency of process was found to rise ca. three times when the flow rate of wastewater was increased from 3 mL/min to 15 mL/min. The process efficiency was doubled under the same condition regarding actual wastewater. The effect of flow rate on the treatment efficiency was observed to be altered according to the metal ionic form and solution composition. The coefficient of mass transfer was estimated using model equation, which verified that the raised treatment efficiency at higher flow rate was due to the increased mobility of ionic species.

• Journal of the Korean Society of Safety
• /
• v.31 no.1
• /
• pp.19-24
• /
• 2016

Rubber parts are widely used in many applications such as dampers, shock absorbers, and seals used in railway and automotive industries. Much research has thus far been conducted on property estimation and life prediction of rubber parts. To predict the service life of rubber parts at room temperature, most prior work adopts the well-known Arrhenius model that needs the accelerated life test in high-temperature conditions. However, they may not reflect the actual conditions of use that rubber parts are usually used under a specific strain condition during long period of time. In this context, we propose a method for the life prediction of rubber parts in actual conditions of use. The proposed method is based on the accelerated life test using stress relaxation during which three relatively high elongation percentages (100%, 200%, and 300%) are applied to the rubber specimens. Rubber specimens were prepared in accordance with KS M 6518 standard and three stress relaxation testers were fabricated for actual experiments. Finally, a inverse power model for life prediction was derived from experimental results. The predicted life was compared with the actual test life for validation.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.83-86
• /
• 2005

In this study, SAM (self-assembled monolayer) was applied as an anti-adhesion layer in the nano molding process, to reduce the surface energy between the nano-stamper and the moldeded polymeric nano patterns. Before depositing SAM on the stamper, the nickel stamper was pretreated to remove oxide on the nickel stamper surface. Then, using the solution deposition method, alkanethiol SAM as an anti-adhesion layer was deposited on nickel surface. To examine the effectiveness of the SAM deposition on the metallic nano stamper, the contact angle and the lateral friction force were measured at the actual processing temperature and pressure for the case of nano compression molding and at the actual UV dose for the case of nano UV molding. The surface energy due to SAM deposition on the nickel nano stamper markedly decreased and the high hydrophobic quality of SAM on the nickel stamper maintained under the actual molding environments.

• Journal of Family Resource Management and Policy Review
• /
• v.7 no.2
• /
• pp.117-130
• /
• 2003

This study investigates the literatures of leisure function and resource of the elderly to consider deeply the meaning of their leisure. In conclusion, this study presents the leisure of the elderly has both of positive and negative functions individually, socially and economically and they have the resources of individual, human and social as the usable resources for leisure but each of resources has disturbing restrictions. On the actual condition of elderly's leisure activity, they enjoy negatively like a watching TV and the using rate of leisure facilities is lower than other age groups.

• 대한동의생리학회:학술대회논문집
• /
• 2005.07a
• /
• pp.14-14
• /
• 2005

• Journal of the Speleological Society of Korea
• /
• no.78
• /
• pp.29-31
• /
• 2007

This paper is devoted to a study of the characterization of the plasma state. For the purpose of monitoring plasma condition, we experiment on reactive ion etching (RIE) process. Without actual etch process, generated oxygen plasma, measurement of plasma emission intensity. Changing plasma process parameters, oxygen flow, RF power and chamber pressure have controlled. Using the optical emission spectroscopy (OES), we conform to the unique oxygen wavelength (777nm), the most powerful intensity region of the designated range. Increase of RF power and chamber pressure, emission intensity is increased. oxygen flow is not affect to emission intensity.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.156-161
• /
• 1994

In this paper, we consider an optimal control problem of a nonlinear stochastic system. Dynamic programming approach is employed for the formulation of a stochastic optimal control problem. As an optimality condition, dynamic programming equation so called the Bellman equation is obtained, which seldom yields an analytical solution, even very difficult to solve numerically. We obtain the numerical solution of the Bellman equation using an algorithm based on the finite difference approximation and the contraction mapping method. Optimal controls are constructed through the solution process of the Bellman equation. We also construct a test case in order to investigate the actual performance of the algorithm.

• Journal of the Korea Society for Simulation
• /
• v.10 no.4
• /
• pp.31-40
• /
• 2001

The flight simulator should be made like a actual flight. For the scene of sight, instrument should show the condition of flight and the pilot should catch the altitude, speed, pose and rate of lift of the airplane. This paper describes visual training program of driving airplane in practice. It is for beginners using joystick in PC, implements airplane physical equations. Flight simulator in it implements airplane panel parts in order to make simple modeling, And it uses rendering technology to implement vision parts of panel. It uses double buffering In make it faster and more efficient..

• Journal of the Korea Society for Simulation
• /
• v.12 no.3
• /
• pp.1-11
• /
• 2003

The flight simulator should be made like a actual flight. For the scene of sight, instrument should show the condition of flight and the pilot should catch the altitude, speed, pose and rate of lift of the airplane. The paper describes 3D flight visual training program of driving airplane in practice. It is for beginners using joystick in PC, implements airplane physical equations. And it uses rendering technology to implement vision parts of flying object.