• Smart Structures and Systems
• /
• 제31권1호
• /
• pp.79-88
• /
• 2023

As the number of deteriorated buildings increases, the importance of safety diagnosis, maintenance, and the repair of buildings also increases. Traditionally, building condition assessments are performed by one person or one company and various inspections are needed. This entails a subjective judgment by the inspector, resulting in different assessment results, poor objectivity and a lack of reliability. Therefore, this study proposed a method to bring about accurate grading results of building conditions. The limitations of visual inspection and condition assessment processes previously conducted were identified by reviewing existing studies. Building defect data was collected using the reverse-engineered three-dimensional (3D) model. The accuracy of the results was verified by comparing them with the actual evaluation results. The results show a 50% time-saving to the same area with an accuracy of approximately 90%. Consequently, defect data with high objectivity and reliability were acquired by measuring the length, area, and width. In addition, the proposed method can improve the efficiency of the building diagnosis process.

• 한국생산제조학회지
• /
• 제7권6호
• /
• pp.28-35
• /
• 1998

Computer simulation technique has been applied on the various engineering fields to reduce cost and development period. On this paper, we introduce a crane analysis program. Using this program, we can predict reaction force of each part or supporting force of truck crane on a personal computer system with out exclusive knowledge of multi-body dynamics. In order to consider the effect of boom flexibility according to each working condition, flexible dynamic theory is applied to the program. Actual crane model is analyzed on special work condition using this program and the results are compared with those of rigid boom model.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.234-235
• /
• 2014

Recently, waterproof construction used to self adhesive waterproofing sheet in the actual field in winter for reduce cost and term. However self adhesive waterproofing sheet's quality is declined in low temperature condition. So, this study was to confirm on the low temperature condition of concrete substrate effecting the adhesion of self adhesion waterproofing sheet using interface leakage test. As a result of this study, self adhesion waterproofing sheet must not be used at temperature below 5℃. Also, adhesion between waterproofing sheet and concrete is declined in low temperature.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1330-1332
• /
• 2000

In general, the expected life of power semiconductor elements is known for semi-permanent, but actual characteristics are changed according to the such environment conditions obviously because of using time or operating condition. Specially, in case of using at the power plant it is very important to sustain reliability for power semiconductor which it affect to stop operating condition as deterioration or break. Therefore, we need to apply maintenance technics to got the reliability which is a prediction method of life cycle. This paper shows the result of the analyzed data for element characteristic and effects used practically and we had developed the effective equipment which for diagnostic the semiconductor performance.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.588-593
• /
• 2012

Nowadays, various forms of electro-optical rifle scope have been developed and used in order to enhance the accuracy of small arms. However, firing shock acceleration has characteristics of pyroshock having a big acceleration value with very short duration time, which the electro-optical scopes should be designed to sustain. In this paper, the firing shock acceleration, which is transmitted to the electro-optical scope, was measured and SRS (Shock Response Spectrum) analysis was performed by using the measured firing shock acceleration. Furthermore, a shock test condition using a drop-table shock tester, which can simulate the actual firing shock acceleration, was devised. The devised shock test condition will be utilized to test the electro-optical scope itself before attaching it to the small arms.

• 한국융합학회논문지
• /
• 제11권12호
• /
• pp.343-351
• /
• 2020

본 연구의 목적은 COVID-19 상황에 따른 스포츠 활동 실태를 파악하여 스포츠 활동 개선방안을 도출하는 것이다. 연구대상은 서울 및 경기도에 거주하고 있는 10대부터 60대의 남녀 총 697명을 편의표집법으로 선정하였다. 네이버 폼을 이용하여 설문지를 배포하였고 자료 분석은 SPSS 12.0 program을 이용하여 빈도분석을 하였으며 결과는 다음과 같다. 첫째, 현재 COVID-19 상황 속에서 61.4%가 스포츠 활동을 하고 있는 것으로 나타났다. 둘째, 스포츠 활동 참여자들은 유튜브 시청, 홈트레이닝/화상PT 등 비대면 스포츠를 즐기는 것으로 나타났다. 셋째, COVID-19 상황이 스포츠 활동에 가장 영향을 미치는 요인으로 확인되었다. 넷째, 향후 COVID-19와 같은 전염성 질병을 대비한 방안이 마련되었으면 좋겠다는 의견이 가장 많았다. 스포츠 활동 개선방안으로는 첫째, 다양한 온라인 콘텐츠 개발, 둘째, COVID-19 시대의 건강과 웰빙의 증진을 위한 국가정책 수립 및 이행, 셋째, 온라인 스포츠 활동을 위한 기술력 확보 등이 도출되었다.

• 한국안전학회지
• /
• 제34권4호
• /
• pp.6-14
• /
• 2019

There are about 38,977 CNG cars and 247 natural gas vehicle charging stations in operation in order to improve the urban air environment. With the introduction of natural gas vehicles, the atmospheric environment, which was the main cause of air pollution in the metropolitan area, was remarkably improved. However, unlike these positive effects, CNG bus accidents, which occurred more than 10 times since 2005, have caused concern among the majority of citizens using public transportation. It is necessary to make a judgment on the feasibility and future direction of CNG pressure vessel safety management that can safeguard the safety of CNG pressure vessel at the time of starting. In this study, we investigates production and use of CNG vessel, the current status of safety management of CNG bus transportation companies & charging stations and then proposes measures to prevent accident recurrence and safety management based on the actual situation investigation and analysis.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.126-127
• /
• 2018

Rebar work is important in terms of cost and process of reinforced concrete construction along with formwork and concrete construction, and the quality of reinforced concrete construction has a great influence on the safety and durability of the structure. Therefore it is important to thoroughly inspect the steel reinforcement after casting the concrete because it is difficult to confirm the actual condition of the reinforcement. The purpose of this study is to develop an augmented reality system to visualize the records of bar placing work, which is increasingly utilized in the construction field. In order to improve maintenance of reinforced concrete, this study suggests a plan to effectively manage the drawing information including the structural drawing, the placing drawing, and the photographed image at the construction and inspection stage, and develop a system that utilizes augmented reality technology that can display the state of the inside of a concrete structure by superimposing it on actual environment.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제20회 춘계학술대회 논문집
• /
• pp.197-200
• /
• 2003

Plows in the LOX manifold with two different types of predistributor have been analyzed using a CAE technique. The computational geometry and flow condition through the injection holes resemble those in the actual manifold of the liquid rocket, so that the results can describe the actual flow reasonably It is noted that two different types of predistributors lead to very similar pressure and mass distributions in the plane just above the injection holes. Also the pressure drop across the injection holes is rather uniform regardless of location of the holes and this would suggest that the simplified modeling of the flow through the injection holes is possible from an engineering point of view.

• International Journal of Advanced Culture Technology
• /
• 제10권3호
• /
• pp.85-92
• /
• 2022

In previous private education expenses were concentrated only on expenses for elementary, middle, and high school students. Therefore, it is difficult to understand the actual condition of preschool children's private education expenses. To solve this problem, we analyze the 2013 and 2020 data of the Korea Welfare Panel to confirm the private education expenditures of pre-school children. Also, we examine the differences and changes in private education expenditures according to household variables. We selected the household variable as the socio-demographic variable of the study subject. We defined the household variable as the area and income of the household. We show the actual results of private education expenses for household variables using frequency analysis, descriptive statistical analysis, t-test, and one-way ANOVA of SPSS 27.