• 제목/요약/키워드: active suspension system

검색결과 261건 처리시간 0.022초

전자기 액츄애이터를 이용한 능동 진동제어시스템 (Active Vibration Control System Using Electromagnet Actuator)

  • 이주훈;전정우;황돈하;강동식;최영규
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
    • /
    • pp.2809-2811
    • /
    • 2005
  • In this paper, we address an active vibration control system, which suppresses the vibration engaged by magnetically levitated stage. The stage system consists of a levitating platen with four permanent magnetic linear synchronous motors in parallel. Each motor generates vertical force for suspension against gravity and propulsion force horizontally as well. This stage can generate six degrees of freedom motion via the vertical and horizontal forces. In the stage system, which represents the settling-time critical system, the motion of the platen vibrates mechanically. We designed an active vibration control system for suppressing vibration due to the stage moving. The command feedforward with inertial feedback algorithm is used for solving stage system's critical problems. The components of the active vibration control system are accelerometers for detecting stage tables's vibrations, a digital controller with high precise signal converters, and electromagnetic actuators.

  • PDF

맥퍼슨 타입 반 능동 현가장치의 진동제어 성능 고찰 (A Study on Vibration Control Performance of Macpherson Type Semi-Active Suspension System)

  • 사이카 두타;한철희;이태훈;최승복
    • 한국소음진동공학회논문집
    • /
    • 제26권2호
    • /
    • pp.157-164
    • /
    • 2016
  • 이 논문은 MR 댐퍼를 적용한 맥퍼슨 타입의 반 능동 현가장치의 진동제어에 관한 연구를 보여준다. 맥퍼슨 스트럿의 기하학적 분석을 바탕으로 동역학 지배 방정식이 설립되었으며, 제어기 설계를 위해 평형 점 근처의 비선형적 운동이 선형화하였다. 이어서 시스템의 향상된 반응시간을 위해 새로운 적응 움직임 슬라이딩모드 제어기를 제안하였으며, 시뮬레이션을 통해 범프와 랜덤도로에서 차량으로 가해지는 진동에 따른 제어 성능을 기존슬라이딩모드 제어기 및 스카이훅 제어기와의 비교를 통해 우수성을 평가하였다.

차량 능동 현가장치의 혼합제어기 설계

  • 한기봉;이시복
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1993년도 추계학술대회 논문집
    • /
    • pp.293-298
    • /
    • 1993
  • In ground vehicles, the increasing demand for safety and ride comfort which are trade-off relation, especially at high speeds, has led to the development od actively controlled suspensions. The LQG/LTR controller can be used to design a robust feedback control system that deals with disturbance rejection properties as well as insensitivity to modelling errors and sensor noise. And when the disturbance can not be measured but is limited within a certain frequency range, a bandpass feedback to eliminate the disturbance response can be used. In this paper, hybrid controller cosisted of bandpass feedback controller and LQG/LTR controller is applied to a quarter-car model moving on a randomly profiled road. The random road profile considered as colored noise is shaped from white noise by use of shaping filter. The performance of the hybrid control system is compared with that of an LQG/LTR controlled system.

  • PDF

능동적 점성감쇠를 이용한 차량용 동적 흡진기의 모델링과 제어에 관한 연구 (A Study about Modeling and Control of Dynamic Absorber for Vehicle by Using Active Viscous Damping)

  • 김대원;배준영
    • 소음진동
    • /
    • 제9권1호
    • /
    • pp.121-130
    • /
    • 1999
  • Generally, A Dynamic Absorber by using Active viscous Damping is highlighted for effective suspension system, such as improved ride comfort and handling in the market. Lately, this system based on the Sky-Hook damper theory is introduced by the name of "Active Dynamic Absorber" to us. This system has an excellent performance in contrast to Passive. Adaptive Dynamic Absorber, besides having low cost components of system, low energy consumption. light weight of system. In this viewpoint. most of car-maker will adopt this system in the near future. For this reason, we developed Dynamic Absorber by using Active viscous Damping which is equipped with continuously variable Dynamic Absorber and Control logic consisting Filter and Estimator. control apparatus of Dynamic Absorber operated by 16-bit microprocessor of high performance. variable device of viscous Damping. G-sensor so on. In this paper. several important points of development procedure for realizing this system will be described with results in which is obtained from experiment by simulation and Full car test in Proving ground. respectively.pectively.

  • PDF

3자유도 병렬 로붓을 이용한 선실 운동의 능동제어 (Active Control of a Ship Cabin Motion Using 3-DOF Parallel Robots)

  • 배종국;심호석;이재원;주해호
    • 한국정밀공학회지
    • /
    • 제21권1호
    • /
    • pp.116-123
    • /
    • 2004
  • The demand for the stable and comfortable cabin of a high speed passenger ship is increasing. The study on shipboard comfort has been mainly concentrated on the motion control of a whole hull body. In this study, however, a new control system operated by two parallel robots (3RPS, 3SPR) such as the active suspension system of motor vehicle is proposed. The goal of this control is keeping zero velocity of the upper robot (cabin) although the lower robot (ship) is moving by the waves. Jacobian matrix was used to design the controller, From the simulation results, the remarkable reduction of motion of the cabin (upper platform) was observed. The 3SPR parallel robot shows better performance compared to the 3RPS robot.

반능동형 MR유체 마운트의 성능제어 (Control Performance for Semi-active Mount Featuring Magneto-Rheological Fluid)

  • 김옥삼;박우철;이현창
    • 동력기계공학회지
    • /
    • 제8권2호
    • /
    • pp.53-58
    • /
    • 2004
  • In this paper, the semi active mount featuring Magneto rheological fluid(MR Fluid) is proposed. MR fluid is suspension of micro sized magnetizable particles in a fluid medium, and its apparent viscosity can be varied by the applied strength of magnetic field. When the controllable MR fluid is applied to mechanical devices, the devices provide simple, rapid response interfaces between electronic controls and mechanical systems. The MR fluid is applied in the conventional fluid mount for improving its performance of the mount's isolation effect. A appropriate size of the MR mount is designed and manufactured on the basis of Bingham model of MR fluid. In addition, the field dependent damping forces of MR mount are evaluated with respect to the input frequency variation.

  • PDF

Variable Suspension Design for Active Pantograph

  • Shin, Seungkwon;Kim, Hyungchul;Jung, Hosung;Park, Jongyoung;Kim, Sangahm
    • International Journal of Internet, Broadcasting and Communication
    • /
    • 제7권2호
    • /
    • pp.105-108
    • /
    • 2015
  • There are a lot of traffic jams in the metropolitan area and the commuting time has been longer nowadays. So the urban people has been interested in the GTX(Great Train Express) project in Korea. The GTX is the train which runs at 200km/h speed in underground tunnels. If the train also operates at high speed in tunnel section, the pressure wave will happen and the uplift force of pantograph may vary abruptly. If the rigid trolley bar system is used in tunnel section, it is difficult to improve the commercial speed of train. In order to improve the train speed in tunnel section, this paper presents the new pantograph concepts which can change the suspension stiffness and deals with the dynamic behavior characteristics of pantograph according to the parameter variation.

수도작용 붐 방제기의 수평제어장치 개발에 관한 연구 (A Study on Control System for Balancing a Boom of Self-Propelled Boom Sprayer)

  • 정창주;노현권;최영수;장영창
    • Journal of Biosystems Engineering
    • /
    • 제22권2호
    • /
    • pp.151-162
    • /
    • 1997
  • Chemical application is one of the most important field operation in rice production. Rolling of a boom due to local unevenness and softness in fields causes a local under/over-application of spray. In this study, the vertical movement of boom tips due to unevenness of ground in paddy fields was investigated, and an active pendulum suspension control system was designed and tested for compensating the movement and balancing the boom to the ground. The results for testing the performance of the control system showed that the system could balance the boom both in flat and inclined fields. The active pendulum control system developed in this study could be properly used for improving spraying performance of a boom sprayer.

  • PDF

자동차 능동형 샤시시스템 개발동향

  • 허승진
    • 기계저널
    • /
    • 제32권10호
    • /
    • pp.847-857
    • /
    • 1992
  • 일반적으로 자동차의 샤시(chassis)라 하면 총체적인 개념에서 자동차로부터 차체(body)를 제외한 부분을 일컫는데, 구동 및 제동장치, 바퀴 현가장치, 조향장치, 타이어 및 휠 등이 이에 속한다. 1970년대 마이크로 컴퓨터의 응용기술이 도입되면서 엔진분야에서 시작한 자동차 전자화기술은 구동 및 제동분야에서의 전자제어식 제동잠김 및 구동 미끄럼방지 시스템(ABS/TCS)의 응용기 술을 거쳐 1980년 중반부터 차량의 현가 및 조향분야에서 능동형의 시스템이 개발되기 시작하 였다. 그 대표적인 예로서 자동차용 적응식 및 반 능동식 가변댐퍼(variable damper), 능동식 현가시스템(active suspension system) 그리고 4륜조향 시스템(four wheel steering system)을 들 수 있다. 1990년대에 들어서는 이러한 각종 능동형 시스템이 종합적으로 고려되어 설계되는 이 른바 자동차의 샤시 통합제어 시스템(chassis integrated control system)또는 능동형 샤시 시스템 (active chassis system)으로 발전되어 가고 있는 추세에 있다. 이 글에서는 최근에 가장 대표 적인 능동형 샤시시스템으로서 각종 능동식 현가시스템 및 4륜조향 시스템의 개발동향 및 기 술적, 경제적인 측면에서의 종합적인 검토를 하고자 한다.

  • PDF

RPS 시스템을 이용한 차량 제어 특성 해석 (Analysis of Control Performance using RPS System)

  • 김효준;이창노
    • 한국산학기술학회논문지
    • /
    • 제19권5호
    • /
    • pp.160-166
    • /
    • 2018
  • 본 연구에서는 주행하는 도로면의 단면 형상 정보를 이용하는 RPS 시스템과 다원형 감쇠 특성을 가지는 MSD 시스템을 기반으로 예견 제어 알고리즘을 적용한 지능형 현가 시스템을 제안하고, 그 결과를 제시하였다. 자동차의 과도한 진동과 조종 불안정성을 유발하는 대표적인 외란 입력은 주행하는 도로면에 돌출되거나 함몰된 불규칙한 주행 장애물이다. 이러한 장애물의 존재 유무만이 아니라 그 형상에 대한 정보를 안다면 이를 활용하여 제어 성능을 개선시킬 수 있다. 선행 연구 결과를 바탕으로 하여, 상용성을 고려한 구조화된 작동 시스템을 적용한 응용 연구를 수행하였다. 이를 위해 RPS 시스템과 예견 제어 기법을 기반으로 한 제어 알고리즘과 다차원화된 감쇠 특성을 가지는 MSD 시스템 간의 스위칭 알고리즘을 개발, 연계성을 제시하였다. 실차 적용성을 파악하기 위하여, 제안된 제어 프레임을 전차량 모델에 구현하여 시뮬레이션을 수행하였다. 구조적 간결성을 목표로 적용된 3-DS 작동기 시스템과 결합된 전자제어식 현가 시스템을 통하여 탑승자의 승차감과 차체의 조종 안정성을 효과적으로 개선할 수 있음과 제 시스템의 유용성을 확인하였다.