• 한국자동차공학회논문집
• /
• 제21권6호
• /
• pp.16-23
• /
• 2013

It is important that proving ground damage is correlated with target customer usage. This paper describes the test mode for durability test of active suspension control system for proving ground correlation and optimization. Acceleration, strain, wheel force and other types of data are collected on a vehicle as it traverses different proving ground surfaces. The primary objective of the analysis is to determine which mixture of proving ground surfaces offers the best representation of customer usage while minimizing the total test time. And durability testing offers the best way to assess the capability of a product to reach its reliability target. The test should be representative of the real environmental load and replicate the same customer usage.

• 한국자동차공학회논문집
• /
• 제2권2호
• /
• pp.83-94
• /
• 1994

Performance test result on prototype car equipped with low-band type active suspension system is reported. Control theory is explained first. Simulation for feasibility and parameter tuning, control module test using hydraulic exciter and test run, and performance evaluation of the test car on test track are reported successively. Emphasis was put on modification of control theory which caused many unexpected problems in actual implementation.

• 한국정밀공학회지
• /
• 제18권2호
• /
• pp.206-213
• /
• 2001

An overlapping decentralized robust EA(eigenstructure assignment) controller is designed for an active suspension system of a vehicle based on a full car model with 7-degree of freedom. Using overlapping decomposition, the full car model is decentralized by two half car models. For each half car model, an effective and disturbance suppressible controller can be obtained by assigning appropriately a left eigenstructure of the system. The performance of the proposed overlapping decentralized robust EA controller is compared with that of a conventional centralized EA controller through computer simulations.

• Transactions on Control, Automation and Systems Engineering
• /
• 제2권1호
• /
• pp.1-6
• /
• 2000

This paper presents a control of active suspension for quarter car model with two degree of freedom by using H$\infty$ method. Absolute velocity of car body is measured for feedback. The system parameter variations are treated with multiplicative uncertainty model. Simulation results show that the H$\infty$ control provides good trade-off between ride quality, suspension packaging and road holding constraints. The experiment with a front wheel suspension system was done to verify the simulation results.

• International Journal of Automotive Technology
• /
• 제3권1호
• /
• pp.27-32
• /
• 2002

Semi-active suspension systems are greatly expected to be in the mainstream of future controlled suspensions fur passenger cars. In this study, a continuous variable damper for a passenger car suspension is developed. It is controlled actively and exhibits high performance with light weight, low cost, and low energy consumption. To get fast response of the damper, reverse damping mechanism is adapted, and to get small pressure change rate after blow-off, a pilot controlled proportional valve is designed and analyzed. The reverse continuous variable damper is designed as a HS-SH damper which offers good body control with reduced transferred input force from tire, compared with any other type of suspension system. The damper structure is designed, so that rebound and compression damping force can be tuned independently, of which variable valve is placed externally. The rate of pressure change with respect to the flow rate after blow-offbecomes smooth when the fixed orifice size increases. Damping forces are measured with the change of the solenoid current at the different piston velocities to confirm the maximum hysteresis of 20N, linearity, and variance of damping farce. The damping farce variance is wide and continuous, and is controlled by the spoof opening, of which scheme is usually adapted in proportional valves. The reverse continuous variable damper developed in this study is expected to be utilized in the semi-active suspension systems in passenger cars after its performance and simplicity of the design is confirmed through real car test.

• 동력기계공학회지
• /
• 제5권2호
• /
• pp.87-92
• /
• 2001

Automotive suspension system is a mechanism for isolation of the vibration coming from the road inputs. Recently, the electronically controlled suspension systems which may improve ride and handling performance have been developed. Here, the continuously controlled semi-active suspension system is focused. As a mechanism to control damping forces continuously, a solenoid valve is used. The modeling for the solenoid valve is introduced briefly, a vehicle dynamics modeling is constructed, and then combined system model is completed. To design the efficient control algorithm for the semiactive suspension system the knowledge based fuzzy logic is applied and the technique how to apply the sky-hook theory to the fuzzy logic is developed. Finally, to confirm the improvement of performance the computer simulation is carried out.

• 대한기계학회논문집
• /
• 제17권6호
• /
• pp.1381-1388
• /
• 1993

본 연구에서는 구조계와 제어계가 결합된계에 대하여, 성능 평가함수의 구조 설계변수에 대한 감도를 Riccati방정식으로부터 직접 해석할 수 있는 효율적인 방안을 제시하여 동시최적설계가 가능토록한다. 그리고 유색잡음의 불규칙 노면입력을 받는 차체탄성을 고려한 Hac의 2륜 차량의 모델에 LQG제어를 행한 경우에 대하여, 본 연구 방법을 적용시켜 동시 최적화를 수행한 제어성능 특성을 종래의 최적제어만에 의한 제어성능과 비교, 검토 한다. 구조설계변수로는 현가장치의 강성특성, 감쇠특성 및 현가장치 지지점의 위치로 선정한다.

• 대한의용생체공학회:의공학회지
• /
• 제41권5호
• /
• pp.203-209
• /
• 2020

As the number of people with gait disorders increases, the demand for using wheelchairs increases and the area of a ctivity for people with disabilities expands, thereby they increasing the demand for riding comfortability in various driving environments. Therefore, this study is to develop an entry-level active suspension system that apply to wheelchairs and to evaluate its usability. The suspension applied in this paper consists of a coil spring, a shock absorber, a control module to control the strength of the shock absorber, and a road surface condition monitoring system. A wheelchair occupant secures the riding comfort by adjusting the coil strength of the shock absorber in 12 steps according to various road conditions. Therefore, the mechanical properties were evaluated through the structural analysis of the suspension system, and the tendency toward the magnitude of the road surface vibration attenuated according to the rigidity of the suspension through the vibration test was attempted. In conclusion, as a result of structural analysis of the suspension system, stress in a range lower than the yield strength of the material was generated, and the vibration test showed the effect of attenuating the vibration generated from the road surface when the stiffness of the suspension was adjusted.

• 한국정밀공학회지
• /
• 제18권1호
• /
• pp.56-62
• /
• 2001

In this paper, skyhook control of a semi-active ER(Electro-Rheological) damper is investigated. The strength of the ER damper is controlled by a high voltage power supply. This paper deals with a two-degree-of-freedom suspension using the damper with ERF for a quarter vehicle system. The control law for semi-active suspensions modeled in this study is developed using skyhook and Linear Quadratic Regulator(LQR) optimal control method. Computer simulation and experimental results show that the semi-active suspension with ERF damper has good performances of ride quality.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.384-388
• /
• 1996

The closed-loop system modeling of an Active/semiactive suspension system has been accomplished through an artificial neural Networks. The 7DOF full model as the system equation of motion has been derived and the output feedback linear quadratic regulator has been designed for the control purpose. For the neural networks training set of a sample data has been obtained through the computer simulation. A 7DOF full model with LQR controller simulated under the several road conditions such as sinusoidal bumps and the rectangular bumps. A general multilayer perceptron neural network is used for the dynamic modeling and the target outputs are feedback to the input layer. The Backpropagation method is used as the training algorithm. The modeling of system and the model validation have been shown through computer simulations.