• Title/Summary/Keyword: active spring

Search Result 252, Processing Time 0.022 seconds

Development of Plasma Reactor of Dielectric Barrier Discharge for Water Treatment (수처리용 유전체 장벽 방전 플라즈마 반응기 개발)

  • Kim, Dong-Seog;Park, Young-Seek
    • Journal of Environmental Science International
    • /
    • v.21 no.5
    • /
    • pp.597-603
    • /
    • 2012
  • Non-thermal plasma processing using a dielectric barrier discharge (DBD) has been investigated as an alternative method for the degradation of non-biodegradable organic compounds in wastewater. The active species such as OH radical, produced by the electrical discharge may play an important role in degrading organic compound in water. The degradation of N, N-Dimethyl-4-nitrosoaniline (RNO) was investigated as an indicator of the generation of OH radical. The DBD plasma reactor of this study consisted of a plasma reactor, recycling pump, power supply and reservoir. The effect of diameter of external reactor (15 ~ 40 mm), width of ground electrode (2.5 ~ 30 cm), shape (pipe, spring) and material (copper, stainless steel and titanium) of ground electrode, water circulation rate (3.1 ~ 54.8 cm/s), air flow rate (0.5 ~ 3.0 L/min) and ratio of packing material (0 ~ 100 %) were evaluated. The experimental results showed that shape and materials of ground were not influenced the RNO degradation. Optimum diameter of external reactor, water circulation rate and air flow rate for RNO degradation were 30 mm, 25.4 cm/s and 4 L/min, respectively. Ground electrode length to get the maximum RNO degradation was 30 cm, which was same as reactor length. Filling up of glass beads decreased the RNO degradation. Among the experimented parameters, air flow rate was most important parameters which are influenced the decomposition of RNO.

Magnetorheological elastomer base isolator for earthquake response mitigation on building structures: modeling and second-order sliding mode control

  • Yu, Yang;Royel, Sayed;Li, Jianchun;Li, Yancheng;Ha, Quang
    • Earthquakes and Structures
    • /
    • v.11 no.6
    • /
    • pp.943-966
    • /
    • 2016
  • Recently, magnetorheological elastomer (MRE) material and its devices have been developed and attracted a good deal of attention for their potentials in vibration control. Among them, a highly adaptive base isolator based on MRE was designed, fabricated and tested for real-time adaptive control of base isolated structures against a suite of earthquakes. To perfectly take advantage of this new device, an accurate and robust model should be built to characterize its nonlinearity and hysteresis for its application in structural control. This paper first proposes a novel hysteresis model, in which a nonlinear hyperbolic sine function spring is used to portray the strain stiffening phenomenon and a Voigt component is incorporated in parallel to describe the solid-material behaviours. Then the fruit fly optimization algorithm (FFOA) is employed for model parameter identification using testing data of shear force, displacement and velocity obtained from different loading conditions. The relationships between model parameters and applied current are also explored to obtain a current-dependent generalized model for the control application. Based on the proposed model of MRE base isolator, a second-order sliding mode controller is designed and applied to the device to provide a real-time feedback control of smart structures. The performance of the proposed technique is evaluated in simulation through utilizing a three-storey benchmark building model under four benchmark earthquake excitations. The results verify the effectiveness of the proposed current-dependent model and corresponding controller for semi-active control of MRE base isolator incorporated smart structures.

HPLC Analysis of Biomass and Community Composition of Microphytobenthos in the Saemankeum Tidal flat, West Coast of Korea (한국 서해 새만금 갯벌에서 저서미세조류의 생체량과 군집조성에 대한 HPLC 분석)

  • OH Seung-Jin;MOON Chang-Ho;PARK Mi-Ok
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.37 no.3
    • /
    • pp.215-225
    • /
    • 2004
  • Biomass and community composition of microphytobenthos in the Saemankeum tidal flat were studied by HPLC analysis of the photosynthetic pigments from November 2001 to November 2002. The environmental factors of sediment were also investigated to examine the relationship between microphytobenthos biomass and sedimentary environments. The detected photosynthetic pigments of microphytobenthos were chlorophyll a, b, c, fucoxanthin, 19'-hexanoyloxyfucoxanthin, violaxanthin, diadinoxanthin, alloxanthin, diatoxanthin, zeaxanthin+lutein, peridinin and beta-carotene. Pheophytin a, the degradation product of chlorophyll a, was also detected. The results of pigmen analysis suggest the presence of diatom (fucoxanthin), euglenophytes (chlorophyll b), chlorophytes (chlorophyll b + lutein), cyanobacteria (zeaxanthin), cryptophytes (alloxanthin), chrysophytes (fucoxanthin + violaxanthin), prymnesiophytes (19'-hexanoyloxyfucoxanthin) and dinoflagellates (peridinin). Chlorophyll a concentration in the top 0.5 cm of sediment was in the range of $0.24\;mg{\cdot}m\^{-2}\;-32.11\;mg{\cdot}m\^{-2}$ in the study area. The increase of chlorophyll a concentration in the spring indicates the occurrence of a microphytobenthic bloom. In the summer, there was a sharp decrease of the chlorophyll a concentration which was probably due to high grazing activity by macrobenthos. The annual mean chlorophyll a concentration in the study area was low compared to that in most of other tidal flat areas probably due to active resuspension of microphytobenthos and high grazing activity by macrobenthos. There was no clear relationship between microphytobenthos biomass and sedimentary environments because of a large variety of physical, chemical and biological factors, Pigment analysis indicated that while diatoms were dominated in the microphytobenthic community of the Geojon tidal flat, euglenophytes and/or chlorophytes coexisted with diatoms in the Mangyung River tidal flat.

Tracking control of variable stiffness hysteretic-systems using linear-parameter-varying gain-scheduled controller

  • Pasala, D.T.R.;Nagarajaiah, S.;Grigoriadis, K.M.
    • Smart Structures and Systems
    • /
    • v.9 no.4
    • /
    • pp.373-392
    • /
    • 2012
  • Tracking control of systems with variable stiffness hysteresis using a gain-scheduled (GS) controller is developed in this paper. Variable stiffness hysteretic system is represented as quasi linear parameter dependent system with known bounds on parameters. Assuming that the parameters can be measured or estimated in real-time, a GS controller that ensures the performance and the stability of the closed-loop system over the entire range of parameter variation is designed. The proposed method is implemented on a spring-mass system which consists of a semi-active independently variable stiffness (SAIVS) device that exhibits hysteresis and precisely controllable stiffness change in real-time. The SAIVS system with variable stiffness hysteresis is represented as quasi linear parameter varying (LPV) system with two parameters: linear time-varying stiffness (parameter with slow variation rate) and stiffness of the friction-hysteresis (parameter with high variation rate). The proposed LPV-GS controller can accommodate both slow and fast varying parameter, which was not possible with the controllers proposed in the prior studies. Effectiveness of the proposed controller is demonstrated by comparing the results with a fixed robust $\mathcal{H}_{\infty}$ controller that assumes the parameter variation as an uncertainty. Superior performance of the LPV-GS over the robust $\mathcal{H}_{\infty}$ controller is demonstrated for varying stiffness hysteresis of SAIVS device and for different ranges of tracking displacements. The LPV-GS controller is capable of adapting to any parameter changes whereas the $\mathcal{H}_{\infty}$ controller is effective only when the system parameters are in the vicinity of the nominal plant parameters for which the controller is designed. The robust $\mathcal{H}_{\infty}$ controller becomes unstable under large parameter variations but the LPV-GS will ensure stability and guarantee the desired closed-loop performance.

Biochemical Studies on Korean Fermented Foods. (IX) Variation of Vitamin $B_{12}$ during the Kimchi Fermentation Period (한국 발효식품에 대한 생물화학적 연구 (제9보) 침채류의 발효에 따르는 $VitaminB_{12}$의 변화에 대하여)

  • Lee, In-Jae;Haw, Kum;Kim, Sung-Ikk
    • YAKHAK HOEJI
    • /
    • v.4 no.1
    • /
    • pp.53-55
    • /
    • 1959
  • In order to confirm on production of vitamin $B_{12}$ during the kimchi fermentation period, the variation of its content is studied in this paper As a sample of kimchi for this fermentation study due to the seasonal condition, nabakkimchi which is aseasonal one in early spring, is prepared by author. The content of vitamin $B_{12}$ is estimated by the microbiological assay method using lactobacillus leichmannii A Tee 7830. Details for assay are indicated in the original part. And the pseudo-vitamin $B_{12}$ substances as thymidine which is active to the growth of lactobacillus leichmannii, are eliminated by the alkali treatment method of sample solution, According to the results shown in table 2 and 3 and figures 1 to 4, the following conclusions are summerized; 1. Vitamin $B_{12}$ produced during the fermentation period of kimchi. And the content of this vitamin during its optimum fermentation period, is much higher content compared with the theoretically calculated amount from its materials, This has been confirmed at the repeated experiment. The trend of variation during its period is indicated at the figures. 2. The sterilized kimchi inhibited the fermentation by sterilization at the preparation, did not increased its content showing only its theoretically calculated amount.

  • PDF

Case Study of Assisted Living Facility (ALF) as a 'Home' (집'으로서의 노인보호주택 사례연구)

  • 김영주
    • Proceeding of Spring/Autumn Annual Conference of KHA
    • /
    • 2002.11a
    • /
    • pp.137-142
    • /
    • 2002
  • The purpose of this study was to examine the features that make residents feel “at home” in ALFs in Southwest Virginia and to suggest further policy and design guidelines for better Quality of ALFs as a “home.” For this purpose, residents' needs, experiences, and opinions of the physical environment, the social environment, and the organizational environments such as policies and programs of ALFs were identified. As a multi-case study, five ALFs in Southwest Virginia were studied using constant comparative methos of data analysis. In addition to face-to-face interviews with 25 residents and five administrators of five ALFs, observations were conducted with personal journal. Overall, the five sites selected presented homelike features showing the philosophy of assisted living which combines housing and services. Each facility was designed to be a single-family house or multi-family dwelling in outside appearance. As a whole, residents felt isolation and loneliness and they did not have active interaction with other residents because of diverse background among the residents. However, all of them had close relationships with the staff. The staff's attitude and behavior seemed to influence greatly the residents' feeling “at home.” Despite the provision of diverse activities by the facilities, many residents did not participate in the programs. Most of the residents agreed that the rule and regulations were fair. In spite of high satisfaction with the facility, many people did not think of their current dwelling as a real ‘home.’ As the biggest difference between living in their own homes and living in the ALF, people pointed out a lack of independence, freedom, and autonomy. Residents of ALFs may have reordered their priorities in their current life situation so that safety, security, and care were more important to them than feeling “at home.” Among the three factors --physical, social, and organizational-- that affect the residents' perception of ALFs as a “home, ” many emphasized the importance of social factors such as relationships with the staff and residents, and social support from their family or friends.

  • PDF

Tidal Flats and Resident Life : The Case of Bay, Gomso Bay, Youngwang Tidal Flat (서해안 갯벌과 주민 생활 -가로림만, 곰소만, 영광 갯벌을 사례로-)

  • Lee, Yun-Hwa
    • Journal of the Korean association of regional geographers
    • /
    • v.12 no.3
    • /
    • pp.339-351
    • /
    • 2006
  • The purpose of this study is to investigate and analyze the relationships between tidal cycles, surface landforms, and sediments of tidal flats and their resident life. The study areas are Uengdo Ri in the Garolim Bay with wide the mud flat, Doou Ri in the Youngwang tidal flat which is developed sand flat and salt field, and Gomso Bay which is developed aquaculture industry. For resident around tidal flats, sea working takes precedence over farming, and main earnings gets from tidal flats. Resident life around the tidal flats is deeply related to tidal cycles, and low water level of spring tide becomes, they are most active and get more earnings than usual day, so it seems to be periodic markets. It is usually developed shellfish aquafarms in the mud flat, the stow net fishery in the sand flat, and salt fields in the mixed flat near the coast. Also a tidal flat has specialization of economic activity, and is divided into salt field and fish-farming in the supratidal zone, shellfish aquafarm in the intertidal zone, and oyster and porphyra culture in the subtidal zone.

  • PDF

An Analysis on the Satisfaction of Service Quality for Seasonal Arboretum Visitors using IPA (IPA를 이용한 계절별 국립수목원 이용객의 서비스 질 만족도 연구)

  • Lee, Hyo-jung;Kim, Jae-Hyun;Lim, Yun-jung;Chang, Chu-youn;Tae, Yoo-lee;Hong, Sung-Kwon
    • Journal of Korean Society of Forest Science
    • /
    • v.100 no.4
    • /
    • pp.650-663
    • /
    • 2011
  • The purpose of this study was to investigate the satisfaction of service quality for seasonal visitors of Korea National Arboretum using Importance-performance analysis. Data were obtained from visitors of Korea National Arboretum on spring, summer, autumn. Results of analysis showed that all season visitor's satisfaction was high. The IPA was undertaken with total 24 variables about service quality of arboretum. Results of IPA was founded that summer visitors want to improve some services (information facilities, forest museum, conveniences, etc). Autumn visitors, on the other hand, thought that some services (kindness, active responsiveness, variety of plant, etc) are overinvested. As a results, there is differences between importance and satisfaction about seasonal service quality.

A Study on the Quality and Safety of Strawberries and Lettuce Using MA Packaging Container (MA포장용기를 이용한 딸기 및 상추의 품질 안전성에 관한 연구)

  • Hong, Sang-Tai
    • Journal of the Korea Safety Management & Science
    • /
    • v.22 no.4
    • /
    • pp.9-15
    • /
    • 2020
  • As of 2018, total yield of lettuce and strawberry amounted to 93,543 tons (representing 1.0 percent) and 183,639 tons (2.0 percent), respectively, among total yields worth 9,185,889 tons in South Korea. Lettuce is affected by a combination of numerous elements such as varieties, cultivation methods and pests during each growth phase (Lee et al., 1999). It is mainly cultivated in spring and fall. Especially due to respiration rate after harvest leading to reduced quality and poor storage, maintaining annual supply is unavailable (Jang et al., 2018). With the distribution of new varieties, forcing culture and indoor insulated facilities for plant cultivation during winter, strawberries are produced every year except for late summer and early fall. Due to active respiration, transpiration, soft flesh and high water content, the fruit is vulnerable to go bad and got rotten compared to other fruits. Furthermore, it is difficult to maintain freshness due to the possibility of softening, discoloration and fungi (Lee et al., 2012). In this regard, developing improved storage and package techniques is needed to ensure maintaining quality and safety even just two to three days after harvest. In order to ensure improved quality and safety of strawberries and lettuce after harvest, the present study applied a modified atmosphere packaging (MAP) technology (Mostofi et. al., 2008). Going forward, it compared the quality and safety of the two products while being stored in a way that put them in an MAP-applied container and a plastic container at room temperature and 4 degree Celsius.

Measurement of the ICRH antenna phasing using antenna strap probe based diagnostic system in EAST tokamak

  • Liu, L.N.;Liang, Q.C.;Yang, H.;Zhang, X.J.;Yuan, S.;Mao, Y.Z.;Zhang, W.;Zhu, G.H.;Wang, L.;Qin, C.M.;Zhao, Y.P.;Cheng, Y.;Zhang, K.
    • Nuclear Engineering and Technology
    • /
    • v.54 no.10
    • /
    • pp.3614-3619
    • /
    • 2022
  • To operate the ion cyclotron resonance heating (ICRH) antennas in a better heating state and produce relatively low impurities, it is necessary to control the antenna spectrum by changing the antenna phasing. As the electrical length of the antenna feeding transmission lines is changing as a matter of the standing wave pattern at the ceramic supports, 90° elbows, T-connectors and antenna loops, we chose to measure the current at the grounding points of the antenna loops by antenna strap probe. The voltage drops along a small, several millimeter-long paths at the end of the antenna loops give a signal that is proportional to the current in the antenna loop. Through the simulation of the antenna strap probe and the actual measurement of the antenna phasing under vacuum conditions, the reliability of the antenna strap probe based diagnostic system have been successfully proved. Moreover, this system was successfully applied to the ICRH daily experiments in the spring of 2021. In the near future, the active real-time feedback control of the antenna phasing system will be developed based on this diagnostic system in the EAST tokamak.