• 한국정보통신학회논문지
• /
• 제7권8호
• /
• pp.1591-1597
• /
• 2003

본 논문에서는 HEMT(Agilent ATF­34143)를 이용한 부성저항 특성을 갖는 능동 인덕터와 캐패시터를 이용해 능동 공진 발진기 제작에 응용하였다. 5.5GHz 대역에서 능동 인덕터는 ­25$\Omega$의 부성저항과 2.4nH의 인덕턴스를 갖고, 능동 캐패시터는 ­14$\Omega$의 부성저항과 0.35pF의 캐패시턴스를 갖도록 설계하였다. 설계된 능동 인덕터와 캐패시터를 이용 5.8GHz ISM 대역의 국부 발진기로 사용 가능한 능동 공진 발진기를 설계하였다. 애질런트사의 ADS 2002C를 이용 시뮬레이션 하였다. 설계된 발진기는 유전율 3.38, 유전체 두께 0.508mm, 금속 두께 0.018mm인 기판위에 HMIC 형태로 구현하였다. 제작된 능동 공진 발진기는 5.68GHz의 기본 발진주파수에서 ­3.6㏈m의 출력을 얻었고, 100KHz 옵셋에서 ­81㏈c1/Hz의 위상잡음 특성을 갖는다.

• 한국정보통신학회논문지
• /
• 제8권4호
• /
• pp.886-893
• /
• 2004

본 논문에서는 트랜지스터를 이용해서 이득을 갖는 능동 대역 통과 필터, 부성저항 특성을 갖는 능동 공진기를 이용한 능동 공진 발진기를 설계 제작하였다. 제안된 능동 공진 발진기는 ISM 대역의 국부 발진기로 사용 가능하도록 5.5GHz의 발진주파수를 갖도록 설계하였다. 설계된 능동 공진 발진기는 유전율 3.38, 유전체 두께 0.508mm, 금속 두께 0.018mm인 기판 위에 구현하였다. 이득을 갖는 능동 대역 통과 필터를 이용한 능동 공진 발진기는 5.6GHz의 발진주파수와 -2Bm의 출력과 100kHz 옵셋에서의 위상잡음 특성은 -81dBc/Hz이다. 부성저항 특성을 갖는 능동 공진기를 이용한 능동 공진 발진기는 5.8GHZ의 발진주파수와- 4dBm의 출력과 100kHz 옵셋에서의 위상잡음 특성은 -91dBc/Hz이다.

• 산업기술연구
• /
• 제11권
• /
• pp.43-53
• /
• 1991

Two kinds of simple active oscillators are proposed and analyzed assuming that operational amplifier has two-poles frequency characteristics. The first circuit is composed of one operational amplifier, one resistor and one grounded capacitor. The second oscillator is realized with one operational amplifier and three resitors. Proposed oscillators have the low sensitivity of the oscillation frequency for little variations of the passive element values. By the experimental results obtained with Op-Amp. ${\mu}A741$, the simple oscillators can be useful for the frequency range $1.25 KHz{\leq}f_{01}{\leq}40KHz$ for the active-RC type or $45.45 KHz{\leq}f_{02}{\leq}400KHz$ for the active-R oscillator, and it is shown to transform the active-R oscillator circuit into the voltage controlled type. Therefore, two kinds of oscillator circuit are attractive for the IC realization, because they have one operational amplifier, one resistor and one grounded capacitor, or three resistors.

• 전기전자학회논문지
• /
• 제19권4호
• /
• pp.465-471
• /
• 2015

An LC-tuned sinusoidal voltage-controlled oscillator (VCO) using temperature-stable linear operational transconductance amplifiers (OTAs) is presented. Its architecture is based on Hartley oscillator configuration, where the inductor is active one realized with two OTAs and a grounded capacitor. Two diode limiters are used for limiting amplitude. A prototype oscillator built with discrete components exhibits less than 3.1% nonlinearity in its current-to-frequency transfer characteristic from 1.99 MHz to 39.14 MHz and $220ppm/^{\circ}C$ frequency stability to the temperature drift over 0 to $75^{\circ}C$. The total harmonic distortion (THD) is as low as 4.4 % for a specified frequency-tuning range. The simulated phase noise of the VCO is about -108.9 dBc/Hz at 1 MHz offset frequency in frequency range of 0.4 - 46.97 MHz and property of phase noise of VCO is better than colpitts-VCO.

• 전기학회논문지
• /
• 제56권10호
• /
• pp.1807-1813
• /
• 2007

This paper deals with extending the variable natural oscillation frequency range of an active integrated FET oscillator. In this paper, we conform experimentally that the variable range of the natural oscillation frequency is expanded about three times in the oscillator controlled by the varactor diode. When the frequency difference is given to the oscillators in the two element antenna system, phase difference appeared between the oscillators. The 2-, 3-, 4-, 5-element patch antenna arrays are composed for the beam scanning experiments. All the above patch antennas show good phased array characteristics. The range of the scanning angle is about $30^{\circ}$, and the radiation power is gradually increased from $50{\mu}W\;to\;200{\mu}W$. The radiation patterns we sharpened as the number of elements is increased.

• 한국통신학회논문지
• /
• 제21권3호
• /
• pp.763-770
• /
• 1996

In this paper, the Single-stage Transmission type Injectiong-Locked Oscillator(STILO) was designed and fabicated for the Active Integrated Phased Array Antenna(AIPAA) system. The STILO, which was designed and fabricated by injection-locked technique and hair-pin resonator, has the same 210MHz frequency tuning range of the Voltage Controlled Oscillator(VCO) used by varactor. The locking bandwidth of STILO with 11.5MHz bandwidth, is much better than that of the Injection-Locked Dielectric Resonator Oscillator(ILDRO), And the STILO has the improved noise characteristics in AM, FM, and PM. This STILO is useful for the AIPAA, the coupled VCO array, an the MMIC structure.

• 전기학회논문지
• /
• 제64권3호
• /
• pp.438-444
• /
• 2015

A new approach to the active phased arrays for the second harmonic generation is presented. Phase variation between the second harmonic oscillators by the mutual synchronization is analyzed theoretically. In this coupling, the active antenna consists of the FET oscillator which plays two roles in fundamental oscillation and frequency multiplying, and the patch antenna resonated at the second harmonic frequency. The radiated second harmonic wave was scanned by varying the free-running oscillation frequencies of the active antennas. In the experiment using the 2-elements array and the 4-elements array, the radiated beam of the second harmonic wave was scanned more widely compared with the case of the fundamental wave radiation.

• 전기전자학회논문지
• /
• 제15권1호
• /
• pp.49-56
• /
• 2011

본 논문에서는 고주파 발진회로의 공진기를 패치 안테나로 사용하는 능동발진 안테나를 2.4GHz 대역에서 제안하여 소형 무선도플러 센서로서 이동체의 거리나 속도 등을 측정할 수 있게 하였다. 이동체의 움직임은 고주파 발진 주파수의 천이를 발생시키며 이를 검출하는 회로를 통해 제안된 구조의 동작을 확인하였다. 설계 제작된 무선 도플러 센서는 직경이 30mm, 높이 4.2mm 정도로 매우 작은 원형디스크 형태를 갖으며, 안테나는 2.373GHz에서 약 130도의 빔폭과 전방향 방사특성을 나타내었다. 센서의 감도 측정결과, 1m 떨어져 움직이고 있는 도체판에 대해 최소 190mV의 도플러 신호 전압을 얻었고, 센서의 자유낙하 실험으로부터 지표상의 4.5m 지점에서 부터 지표면까지 전압크기가 선형적으로 증가하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.461-464
• /
• 1988

The design of VCO using OTA as active element is discussed in this paper. Several Quadrature oscillator structures ere presented. They use only OTAs and capacitors end are very useful for IC fablication. The frequency of oscillator, $\omega_0$ are proportional to the gm of the OTA and the structures are appropriate for high frequency yea and sinusoidal oscillator operation.

• 전자공학회논문지A
• /
• 제29A권2호
• /
• pp.8-17
• /
• 1992

In this paper a push-push oscillator using DR (dielectric resonator) at K-band is designed and constructed. Two identical oscillators are arranged in a push-push configuration that has the frequency of oscillator that is twice frequency each oscillator. A dielectric resonator is placed at the input of an active two-port device(FET) yielding a stable frequency source. The oscillators realized with this technique exhibit excellent spectral purity and cancellation of fundamental frequency.