• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.1
• /
• pp.203-208
• /
• 2004

To make practical applications of Al-Zn-Mg ternary aluminum alloy effectively in various field, a series of static creep tests under the 16 temperature-stress combination conditions had been performed. The creep tester with constant stress loading was designed and made by the authors and used in this study. The higher the creep temperature rose, the less the stress exponents became. The bigger the applied stresses became, the less values the creep strain activation energy showed. The life prediction constant of Larson-Miller parameter was calculated as about 2.3. In the fractography, the ductile fracture with dimples by intergranular breakage was primarily observed. We can make practical use of these test data in the design, the life prediction and the prevention of the accidents of the thermal facilities, etc.

• Applied Chemistry for Engineering
• /
• v.27 no.1
• /
• pp.56-61
• /
• 2016

In this study, the effect of natural minerals on the reaction kinetics for lignite-$CO_2$ gasification was investigated. After physical mixing of lignite from Meng Tai area with 5 wt% of each natural mineral catalysts among Dolomite, Silica sand, Olivine and Kaolin, $CO_2$ gasification was performed using TGA at each 800, $850^{\circ}C$ and $900^{\circ}C$. The experimental data was analyzed with volumetric reaction model (VRM), shrinking core model (SCM) and modified volumetric reaction model (MVRM). MVRM was the most suitable among three models. As increasing the reaction temperature, the reaction rate constant became higher. With natural mineral catalysts, the reaction rate constant was higher and activation energy was lower than that of without catalysts. The lowest activation energy, 114.90 kJ/mol was obtained with silica sand. The highest reaction rate constant at $850^{\circ}C$ and $900^{\circ}C$ and lower reaction rate constant at $800^{\circ}C$ were obtained with Kaolin. Conclusively, the better catalytic performance could be observed with Kaolin than that of using other catalysts when the reaction temperature increased.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.1 no.1
• /
• pp.50-58
• /
• 1993

The ignition delay of diesel oil and fish oil blended with diesel oils was investigated at various pressure and temperature conditions in a constant volume combustion bomb. The evaporation and combustion duration of diesel oil and fish oil blended with diesel oils were respectively different in high and low temperature. The dependence of ignition delay on the temperature was different in high and low temperature ranges which were divided at the 773K. The dependence of ignition delay on the pressure was almost linear, regardless of the test fuels at the constant temperature(863K). The ignition delay became longer as the blending rate of fish oil increased at the constant temperature and pressure, but it was especially short with 20% fish oil blended with diesel oils.

• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.342-356
• /
• 2016

Purpose: The drying of a thin layer of native cassava starch in a tray dryer was modeled to establish an equation for predicting the drying behavior under given conditions. Methods: Drying tests were performed using samples of native cassava starch over a temperature range of $40-60^{\circ}C$. We investigated the variation in the drying time, dynamic equilibrium moisture content, drying rate period, critical moisture content, and effective diffusivity of the starch with temperature. The starch diffusion coefficient and drying activation energy were determined. A modification of the model developed by Hii et al. was devised and tested alongside fourteen other models. Results: For starch with an initial moisture content of 82% (db), the drying time and dynamic equilibrium moisture content decreased as the temperature increased. The constant drying rate phase preceded the falling rate phase between $40-55^{\circ}C$. Drying at $60^{\circ}C$ occurred only in the falling rate phase. The critical moisture content was observed in the $40-55^{\circ}C$ range and increased with the temperature. The effective diffusivity of the starch increased as the drying temperature increased from 40 to $60^{\circ}C$. The modified Hii et al. model produced randomized residual plots, the highest $R^2$, and the lowest standard error of estimates. Conclusions: Drying time decreased linearly with an increase in the temperature, while the decrease in the moisture content was linear between $40-55^{\circ}C$. The constant drying rate phase occurred without any period of induction over a temperature range of $40-55^{\circ}C$ prior to the falling rate period, while drying at $60^{\circ}C$ took place only in the falling rate phase. The effective diffusivity had an Arrhenius relationship with the temperature. The modified Hii et al. model proved to be optimum for predicting the drying behavior of the starch in the tray dryer.

• Journal of the Korean Applied Science and Technology
• /
• v.3 no.2
• /
• pp.41-47
• /
• 1986

The transesterification reaction between diethanolamine and methyl-methacrylate was kinetically investigated in the presence of various metal acetate catalysts at $120^{\circ}C$. The quantity of methylmethacrylate reacted in the reaction flask was measured by gas chromatography and liquid chromatography, and the reaction rate was investigated by measuring of the quantity of products and reactnts under various catalysts. The transesterification reaction was carried out in the first order reaction kinetics with respect to the concentration of diethanolamine and methylmethacrylate, respectively. The apparent rate constant was found to obey first-order kinetics with respect to the concentration of catalyst. The linear relationship was shown between apparent rate constant and reciprocal absolute temperature, and by the Arrhenius plot, the activation energy has been calculated as 11.08 Kcal with zinc acetate catalyst, 17.99 Kcal without catalyst. The maximum reaction rate was appeared at the range of 1.4 to 1.6 of electronegativity of metal ions and instability constant of metal acetates.

• YAKHAK HOEJI
• /
• v.26 no.4
• /
• pp.231-237
• /
• 1982

The transformation kinetics between polymorphs of sulpiride and the effect of additives on the transformation kinetics were studied. The results could be summarized as follows. 1. Transformation kinetics of the polymorph form I to form II in water suspenion was first order type and transformation rate constant at $25^{\circ}C$ is $2.61{\times}10^{-2}min^{-1}$, the half life of form I was about 27 minutes and the activation energy for transformation was 21.35 Kcal/mole. 2. Glycerine and coloring agents increased the rate of transformation., In the case of polysorbate 80, the rate constant increased in proportion to the concentration of polyserbate 80. Simple syrup showed no effect 3n transformation kinetics.

• Elastomers and Composites
• /
• v.50 no.2
• /
• pp.92-97
• /
• 2015

A study on reaction kinetics for a PTMG/TDI prepolymer with 2,2'-dichloro-4,4'-methylenedianiline (MOCA), of which formulations may be generally used for fabricating high performance polyurethane elastomers, was peformed using non-isothermal differential scanning calorimetry (DSC). A number of thermograms were obtained at several constant heating rates, and analysed using Flynn-Wall-Ozawa (FWO) isoconversional method for activation energy, $E_a$ and extended-Avrami equation for reaction order, n. Urea formation reaction of the present system was observed to occur through the simple exothermic reaction process in the temperature range of $100{\sim}130^{\circ}C$ for the heating rate of $3{\sim}7^{\circ}C/min$. and could be well-fitted with generalized sigmoid function. Though activation energy was nearly constant as $53.0{\pm}0.5kJ/mol$, it tended to increase a little at initial stage, but it decreases at later stage by the transformation into diffusion-controlled reaction due to the increased viscosity. Reaction order was evaluated as about 2.8, which was somewhat higher than the generally well-known $2^{nd}$ order values for the various urea reactions. Both the reaction order and reaction rate explicitly increased with temperature, which was considered as the indication of occurring the side reactions such as allophanate or biuret formation.

• Textile Coloration and Finishing
• /
• v.8 no.3
• /
• pp.36-51
• /
• 1996

In order to investigate the degradation behavior of PET fabrics, sodium diethylene glycolate (SDEG)-diethylene glycol (DEG) solutions were prepared and PET fabrics were treated in the solution. The dissolution rate constant and apparent activation energy of the PET fabrics were calculated by Eyring's and Arrhenius's equation respectively and measured dyeing properties, moisture and antistatic properties. Then compared SDEG-treated fabrics with NaOH-treated. The results were as follows; 1. PET fabrics decreased their weight in SDEG-DEG solution, and the decreasing rate showed a linear relationship to the treating time at constant temperature and concentration of SDEG-DEG solution. 2. The dissolution rate constant showed a linear relationship to the concentration of SDEGDEG solution and an exponential relationship to treating temperature. 3. Apparent activation energy of dissolution was 23.45 kcal/mol. 4. The K/S values and the ΔL values of fabrics treated with SDEG-DEG solution are higher and lower respectively than fabrics treated with NaOH. 5. SDEG-DEG solution treatment improved fabric's moisture regain and it reached almost maximum at about 40% weight loss. 6. In the both reagent the light, wet and sublimation fastness of fabrics are similar. 7. SDEG-DEG solution gave more electrical discharge effect to the fabrics than that of NaOH. 8. NaOH treated PET microfiber have crater-like surface, while SDEG-DEG solution give bathochromic effect to the PET microfiber because which has wrinkles on the surface.

• Journal of the Korean Chemical Society
• /
• v.36 no.4
• /
• pp.517-522
• /
• 1992

The reaction of ${\beta}$-picoline with substituted benzoyl chlorides has been studied by means of conductometry under various pressures in acetonitrile. From the values of pseudo-first order and second order rate constants, the activation parameters (${\Delta}V{\neq}$, ${\Delta}{\beta}{\neq}$, ${\Delta}H{\neq}$, ${\Delta}S{\neq}$ and ${\Delta}G{\neq}$) and the pressure dependence of Hammett ${\rho}$ value were studied. The activation volume, the activation compressibility coefficient and the activation entropy were all negative. By increasing pressure the rate constant and Hammett ${\rho}$ value were increased, and the reaction mechanism was proceed in bond formation favored.

• Transactions of the Korean hydrogen and new energy society
• /
• v.4 no.1
• /
• pp.11-19
• /
• 1993

The kinetic studies of the hydrogen induced amorphization in $ErCo_2$ Laves phase is observed by the internal standard method using X-ray diffraction intensities. The activation energy and rate constant exponent for the amorphization in $ErCo_2$ are found to be 26 kcal/mole and 0.78, respectively. From these results, it is believed that the mechanism of the hydrogen induced amorphization in $ErCo_2$ is related to the motion of Co atoms. Though there are many similar physical properties between $ErCo_2$ and $ErNi_2$, the activation energy for the amorphizatin in $ErCo_2$ is larger than that in $ErNi_2$ and the amorphization rate in $ErCo_2$ is slower. It is suggested that these differences of activation energy for the hydrogen induced amorphization and the amorphization rate between $ErCo_2$ and $ErNi_2$ is due to the occurence of structural change on forming crystalline hydride.