• 한국산업보건학회지
• /
• 제5권2호
• /
• pp.119-127
• /
• 1995

The purpose of this study was to determine the effects of surface-treatment by zinc salts on break-through and adsorption capacity of toluene. Firstly, the coconut activated carbon treated the surface with zinc salts, were exposed by the spike sample(toluene, 69.02ppm, $260.1mg/m^3$), and then the effects of zinc salts were examined by using the gas adsorption kinetics. The results obtained were as follows : 1) BET(Brumaure Emmett Teller) surface area were $954.4m^3/g$ in coconut activated carbon treated with 0.0001 N $Zn(NO_3)_3$ $6H_2O$, and $830.3m^2/g$ in coconut activated carbon treated with 0.0001 N $ZnCl_2$. 2) Migration was decreased in coconut activated carbon treated with the thin level of zinc salts. 3) Breakthrough volume were 73.07 L in coconut activated carbon treated with 0.0001 N $Zn(NO_3)_3$ $6H_2O$, and 72.76 L in charcoal treated with 0.0001 N $ZnCl_2$. 4) ${\tau}$ values(the time required for 50% breakthrough) were 1046.1 min in coconut activated carbon treated with 0.0001 N $ZnCl_2$ and 921.2 min in coconut activated carbon treated with 0.0001 N $Zn(NO_3)_3$ $6H_2O$. 5) Maximum adsorption capacity was 53.9 mg/tube in coconut activated carbon treated with 0.0001 N $ZnCl_2$ and 47.4 mg/tube in coconut activated carbon treated with 0.0001 N $Zn(NO_3)_3$ $6H_2O$. In conclusion, the coconut activated carbon treated the surface with the thin concentration of zinc salts, decreased the breakthrough and increased the BET surface area and the adsorption capacity in case of sampling airborne toluene.

• 환경위생공학
• /
• 제14권2호
• /
• pp.18-24
• /
• 1999

The purpose of this study was carried out to estimate removal possibility of IBMP and IPMP causing odor in raw water. As a result of Freundlich isotherm. IBMP was superior to IPMP in adsorptive capacity. Adsorptive capacities of activated carbon were found to be in order of Lignite, Coconut shell, and Charcoal. These were well fitted with Freundlich isotherm. According to adsorption breakthrough tests for Lignite GAC, breakthrough time of IPMP and IBMP were 5.7hr and 5.5hr, respectively. Because adsorptive capacities of target material were very different with pore size distribution, it seemed that Lignite and Coconut shell based activated carbons were recommended in order to remove door compounds.

• 한국가금학회지
• /
• 제29권1호
• /
• pp.13-18
• /
• 2002

본 연구의 목적은 산란계 사료에 활성야자탄의 첨가가 계란의 품질 및 혈장 콜레스테롤에 미치는 영향을 조사하기 위하여 실시하였다. 사양시험은 47주령 ISA Brown 산란계 144수를 공시하였으며, 처리구로는 옥수수-대두박 위주의 기초사료, 기초사료에 활성야자탄을 0.5%, 1.Oclo 그리고 1.5% 첨가한 구로 4개 처리로 구성되었다. 총 28일간의 사양 시험 기간동안 활성야자탄의 첨가수준이 증가함에 따라 산란율은 유의적으로 증가했다. 난중은 활성야자탄을 급여함에 따라 유의적으로 감소했으며, 난각강도에 있어서는 활성야자탄을 첨가함에 따라 낮아지는 경향을 보였으나 유의적인 차이는 없었다. 또한 난각두께는 둔단부, 예단부 그리고 중앙부에서 활성야자탄을 첨가함에 따라 유의적으로 감소하였다. 난황색에 있어서는 활성야자탄을 첨가함에 따라 증가하는 경향을 나타내었으나 처리구간에 유의적인 차이는 보이지 않았다. 난황계수는 활성야자탄을 첨가한 처리구에서 유의적으로 증가하였다. 혈장내 총 콜레스테롤 함량과 HDL 및 LDL+YLDL콜레스테롤 함량은 처리구에서 감소하는 경향을 보였으나 유의적인 차이는 없었다. 결론적으로 산란계 사료내 활성야자탄의 첨가는 산란을 및 난황계수를 향상시킬 수 있을 것으로 사료된다.

• 원예과학기술지
• /
• 제29권3호
• /
• pp.260-266
• /
• 2011

An efficient protocol was established for high frequency somatic embryogenesis through a callus culture of Coelogyne cristata. The best frequency of callusing was obtained from a PLB segment (3-5 mm) cultured on MS medium supplemented with coconut water (CW) and a combination of both 3 $mg{\cdot}L^{-1}$ of 2,4-D and BA. When the calli were sub-cultured on the MS medium without any PGRs, the average number of somatic embryos were higher than those with PGRs treatment. NAA is the most critical factor among PGRs, which dramatically hindered for the formation of a somatic embryo. The efficacy of the addition of coconut powder (CP) for somatic embryogenesis was almost the same in all treatments. However, the number of somatic embryos formed distinctly depended on age of the callus. The somatic embryos converted into healthy plants with well-developed shoots on the same medium. Plantlets showed the best responses of root and shoot growth when transferred to $\frac{1}{2}$ MS medium containing 1.5 $g{\cdot}L^{-1}$ of activated charcoal. All plants with above 3.0-cm-high were successfully acclimatized in the greenhouse.

• Plant Resources
• /
• 제5권3호
• /
• pp.176-180
• /
• 2002

This study was conducted to develop the clonal propagation technique through in vitro culture using by leaf sheath explants of Phalaenopsis grown in vitro. The highest frequency of protocorm-like body (PLB) formation was obtained when explants of leaf sheath were cultured on VW medium containing 30g/L sucrose, 500 mg/L activated charcoal, 150 mVL coconut water, 1 mg/L NAA, 1 mg/L 2ip and 2.5 g/L gelrite. The PLB formation rate of VW medium was highest followed by modified Hyponex medium, and lowest in MS medium. Plantlets induced from PLBs transferred to plastic pots including spagnum moss were well developed.

• Plant Resources
• /
• 제6권2호
• /
• pp.89-93
• /
• 2003

This study was conducted to develop the clonal propagation technique through in vitro culture using basal stem explants in Phalaenopsis hybrid grown in vitro. The highest frequency of protocorm-like body (PLB) formation was obtained when basal stem explants were cultured on VW medium containing 30g/L sucrose, 500 mg/L activated charcoal, 150 ml/L coconut water, 1 mg/L NAA, 5 mg/L 2iP and 2.5g/L gel rite. PLBs transferred to Hyponex medium were regenerated to plantlets. Plantlets transferred to plastic pots containing spagnum moss were developed and successfully acclimatized under greenhouse. The flower was bloomingly opened in plants regenerated from basal stem explants. The flower was not different from both mother plant and plant induced through clonal propagation of Phalaenopsis hybrid.

• 한국응용과학기술학회지
• /
• 제32권3호
• /
• pp.480-487
• /
• 2015

In this study, several kinds of active carbons with high specific surface area and micro pore structure were prepared from the coconut shell charcoal using chemical activation method. The physical property of prepared active carbon was investigated by experimental variables such as activating chemical agents to char coal ratio, flow rate of inert gas and temperature. It was shown that chemical activation with KOH and NaOH was successfully able to make active carbons with high surface area of $1900{\sim}2500m^2/g$ and mean pore size of 1.85~2.32 nm. The coin cell using water-based binder in the electrolyte of LiPF6 dissolved in mixed organic solvents (EC:DMC:EMC=1:1:1 vol%) showed better capacity than that of oil-based binder. Also, it was found that the coin cell of water-based binder shows an improved cycling performance and coulombic efficiency.

• 한국산업보건학회지
• /
• 제6권2호
• /
• pp.187-201
• /
• 1996

This study was to evaluate the efficiency of diffusive monitor using activated carbon fiber(ACF, KF-1500) in measuring airborne organic solvents. The following characteristics were identified and studied as critical to the performance of diffusive monitor; recovery, sampling rate, face velocity, reverse diffusion and storage stability. For the evaluation of the performance of this monitor, MIBK, PCE, toluene were used as organic solvents. In the sampling rate experiments, eight kinds of solvents (n-hexane, MEK, DIBK, MCF, TCE, CB, xylene, cumene) as well as the above solvents were used. The results were as follows: 1. The desorption efficiencies(DE's) of ACF diffusive monitor ranged from 83 % to 101 %. In contrast, those of coconut shell charcoal ranged from 78 % to 102 %. Especially, the DE's of ACF for the polar solvents such as MEK were superior to those of charcoal. 2. Experimental sampling rates on ACF were average 42ml/min(37-46ml/min) for 11 organic solvents at $24{\pm}2^{\circ}C$, $50{\pm}5%RH$. However ideal sampling rates(DA/L) were 33 % higher than experimental sampling rates. 3. The initial response(15~16 min) of the testing monitor was 2 times higher than the actual concentration determined by the reference methods at $24{\pm}2^{\circ}C$, $8{\pm}5%RH$ and $80{\pm}5%RH$. Within 1 hours, the curve reached a linear horizontal line at low humidity condition. But sampling efficiencies decreased with respect to time at high humidity condition. And sampling efficiencies were higher at high humidity condition than low humidity condition for MIBK. 4. At very low velocity (less than 0.02 m/sec), the concentration of ACF diffusive monitor were poorly estimated. But ACF diffusive monitor were not affected at higher velocity(0.2 m/sec-0.6 m/sec). 5. There was no significant reverse diffusion when the ACF monitors were exposed to clean air for 2 hours after being exposed for 2 hours at the level of 1 TLV. 6. There was no significant sample loss during 3 weeks of storage at room temperature and 5 weeks of storage at refrigeration.

• 한국물환경학회지
• /
• 제26권3호
• /
• pp.446-453
• /
• 2010

This study was investigated nine nitrosamines in small tributary rivers, sewage treatment plants (STPs) and drinking water treatment plants. They are N-nitrosodimethylamine (NDMA), N-nitrosomethylethylamine (NMEA), N-nitrosodiethylamine (NDEA), N-nitrosopyrrolidine (NPYR), N-nitrosodi-n-propylamine (NDPA), N-nitrosomorpholine (NMOR), N-nitrosopiperidine (NPIP), N-nitrosodi-n-butylamine (NDBA) and N-nitrosodiphenylamine (NDPHA). The nine nitrosamines were analyzed by gas chromatography mass spectrometry (GC/MS) using solid phase extraction (SPE) with a coconut charcoal cartridge. Among the nine nitrosamines, NDMA, NMEA, NDEA, NDPA NDBA and NDPHA were detected in small tributary rivers and sewage tretment plants. In small tributary rivers, NDMA, NMEA, NDEA, NDPA, NDBA and NDPHA were obtained as ND~16.4 ng/L, ND~17.7 ng/L, ND~102.4 ng/L, ND~455.4 ng/L, ND~330.1 ng/L and ND~161.0 ng/L, respectively. Also NDMA, NMEA, NDEA, NDPA and NDBA were investigated ND~821.4 ng/L, 22.5~55.4 ng/L, 53.2~588.5 ng/L, ND~56.6 ng/L and ND~527.9 ng/L in STPs, respectively. In drinking water treatment plants, NMEA and NDEA concentration were increased to as high as 38.8 ng/L after ozonation process. However nitrosamines were decreased subsequent biological activated carbon (BAC) treatment process. It was supposed that nitrosamines were formed by $O_3$ oxidation and were removed by biodegradation of BAC.

• Korean Chemical Engineering Research
• /
• 제61권3호
• /
• pp.472-478
• /
• 2023

본 연구에서는 공기청정기 필터용 활성탄의 아세트알데하이드 제거 특성이 금속 촉매 첨착 및 관능기 도입 방법을 사용하여 조사되었다. 야자각 차의 KOH 활성화를 통해 고 비표면적(1700 m²/g)과 미세기공이 발달한 활성탄을 제조하였으며, 금속촉매 첨착과 관능기 개질을 위해 침지 후 기공 내 건조조건에 따른 첨착 효율을 조사하였다. 제조된 활성탄의 물성은 비표면적 및 기공 분석(BET), 유도결합 플라즈마 분광 분석(ICP), 유기 원소 분석(EA) 및 푸리에변환 적외선 분광 분석(FT-IR) 등을 통해 분석하였으며, 활성탄 성능 확인을 위해 침지 농도에 따른 아세트알데하이드 흡착성능을 가스크로마토그래피(GC)로 분석하였다. 첨착용액의 농도가 증가함에 따라 금속촉매 첨착량은 증가하였으며, 비표면적은 감소하는 경향을 보였다. 각 금속촉매 첨착 및 표면개질 활성탄의 파과시험 결과 MgO10@AC, CaO10@AC, EU10@AC, H-U3N1@AC 조성에서 우수한 아세트알데하이드 흡착성능을 보여주었다. 흡착성능이 가장 뛰어난 MgO10@AC에 대해 파과 시간은 533.8 분, 흡착량은 57.4 mg/g으로 측정되었으며, 이는 활성탄에 나노 크기의 MgO 촉매를 첨착할 경우 아세트알데하이드의 카보닐기와 상호작용하여 흡착성능이 개선됨을 알 수 있었다.