• 한국염색가공학회지
• /
• 제13권5호
• /
• pp.41-41
• /
• 2001

In this study, synthetic fiber fabrics such as polyester, nylon 6, acrylic and acetate were dyed with indigoid vat dye. The effects of the composition of alkaline reduction, dyeing time and dyeing temperature on color strength and color fastness of the fabrics were investigated. Also the color fastnesses to wash and light of the dyed fabrics were studied. In dyeing of polyester, nylon, acrylic and acetate fiber fabrics with indigo vat dyes, it appears that these fabrics have high values of K/S up to Ig/L of sodium hydroxide and 6g/L of reducing agent. Indigo vat dyeing for synthetic fiber fabrics was verb fast, and lead to dyeing equilibrium within twenty minutes. The K/S values of dyed fabrics did not changed in dye concentration more than 10% o.w.f.. Synthetic fiber fabrics dyed with indigoid dyes had bad light fastness.

• 한국염색가공학회지
• /
• 제13권5호
• /
• pp.329-335
• /
• 2001

In this study, synthetic fiber fabrics such as polyester, nylon 6, acrylic and acetate were dyed with indigoid vat dye. The effects of the composition of alkaline reduction, dyeing time and dyeing temperature on color strength and color fastness of the fabrics were investigated. Also the color fastnesses to wash and light of the dyed fabrics were studied. In dyeing of polyester, nylon, acrylic and acetate fiber fabrics with indigo vat dyes, it appears that these fabrics have high values of K/S up to Ig/L of sodium hydroxide and 6g/L of reducing agent. Indigo vat dyeing for synthetic fiber fabrics was verb fast, and lead to dyeing equilibrium within twenty minutes. The K/S values of dyed fabrics did not changed in dye concentration more than 10% o.w.f.. Synthetic fiber fabrics dyed with indigoid dyes had bad light fastness.

• 한국염색가공학회지
• /
• 제16권1호
• /
• pp.53-58
• /
• 2004

The preparation of responsive fibers from acrylic fibers is studied. Various responsive fibers, such as fibers which change their color on exposure to light or with change in temperature, have been developed and are used commercially However, the responsive material in these fibers are not the fiber itself but chemicals in microcapsules attached to the fibers by finishing, and few fibers exhibit responsive properties by itself. The partial hydrolysis of polyacrylonitrile fibers to obtain pH responsive fibers is presented in this paper. Partial hydrolysis was effected by control of the concentration of the sodium hydroxide used in the hydrolysis, hydrolysis temperature and time. The degree of hydrolysis was evaluated by nitrogen content of the hydrolyzed fibers and their response, change in length, to aqueous solutions of varying pH was studied by continually changing the pH. Significant changes in lengths with pH were observed and the gel transition behavior varied with the conditions of hydrolysis. The hysteresis of the length change was also studied to evaluate the possibilities of using hydrolyzed acrylic fibers as pH sensors.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1997년도 추계총회 및 학술발표회 논문집
• /
• pp.86-88
• /
• 1997

• 방사선산업학회지
• /
• 제12권4호
• /
• pp.343-348
• /
• 2018

Preliminary study was perfomed to develop a biocompatible filter material using radiation energy. Electrosppined PLLA nano sheets were surface-modificated with hydrophilic groups(acrylic group) by using radiation. The physico-chemical and morphological characteristics of modified PLLA sheets were measured by ATR, SEM, contact angle, and hydrophilic (acryl group) introduction rate (TBO). As a result, there was no morphological(fiber structure) structure change due to radiation, and it was confirmed that an acrylic group was successfully introduced onto PLLA fiber sheet by radiation.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1992년도 제1차 학술발표초록집
• /
• pp.41-41
• /
• 1992

• Journal of Radiation Protection and Research
• /
• 제30권1호
• /
• pp.1-7
• /
• 2005

방사선치료용 고정기구 재질로 사용되는 아크릴을 탄소 섬유로 대체할 목적으로 양 재질의 특성을 방사선량 감쇄와 모의촬영 및 고에너지 확인 영상 측면에서 비교 분석하였다. $30{\times}30cm$ 크기의 2mm 두께의 탄소 섬유판과 6mm 두께의 아크릴판을 선형가속기의 차폐 선반 위치 및 폴리스티렌 팬톰 표면에서 0cm, 5cm, 10cm에 위치시키고, 0.6cc Farmer형 이온전리함으로 측정을 시행하였다. $10{\times}10cm$ 조사야에 4W 광자선을 이용하여 선량을 300MU/min로 50MU를 조사하였다. 선원-팬톰 거리는 120cm였으며, 선량보강은 1cm이었다. 각각의 위치에서 각 재질을 두께를 달리하는 중침 조건에서 3회 반복측정 하였으며, 각각의 경우 대조군인 개방 조사야에 대한 투과율을 얻었다. 영상소견은 통상적 모의촬영조건에서 비교하였다. 동일 두께의 탄소 섬유는 아크릴 보다 방사선 감쇄율이 약 1% 정도 높으나, 동일 강도에서는 방사선 감쇄율이 낮았다. 탄소 섬유는 아크릴과 비교하여 팬톰 표면에 밀착된 경우 선량을 약 2%정도 증가시키나, 표면에서 떨어져있는 경우에는 아크릴에 의하여 작게는 $2{\sim}3%$ 많게는 $5{\sim}7.5%$ 정도 감소된 체내 방사선량 분포를 $97{\sim}99%$ 정상화시켰다. 임상적으로 아크릴판 20 mm 판 2장이 중첩된 고정기구 부분을 방사선이 통과하는 상황이 존재하며, 이 경우 탄소 섬유 8 mm의 방사선 투과율은 폴리스티렌 팬톰 표면 0, 5, 10 cm에서 각각 1.008, 0.991, 0.976이며 아크릴 40mm는 각각 0.916, 0.855, 0.815으로, 아크릴에 의해 $8{\sim}18.5%$ 정도 감소된 체내 방사선량 분포를 2.4% 이내 감소로 호전시켜 $87{\sim}100%$ 정상화시킴을 확인하였다. 탄소 섬유의 모의촬영 영상이 통상 영상소견에 주는 악영향은 없었다. 탄소 섬유는 아크릴에 비하여 고정기구 재질로서의 두께 및 무게 감소, 강도유지, 체내 방사선량 감쇄 측면에서 월등하므로 향후 적극 이용되어야 하겠다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2001년도 춘계 총회 및 학술발표회(한국막학회)
• /
• pp.135-138
• /
• 2001

본 연구는 acrylic폐수의 COD제거를 위한 전처리 공정 및 전 처리된 acrylic폐수를 한외여과 중공사형 모듈과 역삼투 나권형 모듈에 적용하여 투과 플럭스를 고찰하였다. 이로부터 한외여과 및 역삼투 막의 적정 역세척 시간을 결정하고, 운전시간에 따른 막오염을 고찰하였다. 12시간을 기준으로 한외여과 중공사형 모듈에서의 flux가 급격히 떨어지고 있으며 역삼투 나권형 모듈도 비슷한 경향을 나타내고 있다. C3O 및 활성탄으로 전처리된 처리수의 COD, TDS는 한외여과 및 역삼투 공정만으로는 배출허용기준치 이하로 제거하기 어려우므로 UF/RO 공정 적용을 위한 전처리 공정의 개선이 필요하다.

• Fibers and Polymers
• /
• 제6권3호
• /
• pp.250-258
• /
• 2005

The present paper is concerned with the influence of opening roller speed, drum speed difference and suction air pressure on properties of polyester and acrylic open-end friction spun yams. The results shows that the opening roller speed and the suction air pressure have considerable influence on the characteristics of polyester and acrylic open-end friction spun yams. In case of polyester yams the unevenness, imperfection and hairiness decreases and the yam tenacity increases with the increase in opening roller speed and suction air pressure. However for acrylic yams the unevenness and imperfections decreases and tenacity increases with the increase in opening roller speed and suction air pressure.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2007년도 학술발표회 논문집
• /
• pp.425-426
• /
• 2007