• Title/Summary/Keyword: acrylic emulsion

Search Result 103, Processing Time 0.023 seconds

Study on the Preparation and Properties of Polyurethane-Acryl Emulsion Resin (폴리우레탄-아크릴 에멀젼 수지 제조 및 물성에 관한 연구)

  • Kim, Hong-Tae;Lee, Myung-Cheon
    • Applied Chemistry for Engineering
    • /
    • v.16 no.1
    • /
    • pp.39-44
    • /
    • 2005
  • In this study, polyurethane-acryl emulsion resins were synthesized from HDI (hexamethylene diisocyanate), IPDI (isophorone diisocyanate), Polyol, 2-HEMA (2-hydroxy ethylmethacrylate), n-BA (n-butyl acrylate) and MMA (methylmethacrylate). The effects of polyol types on the properties of polyurethane-acryl emulsion resin, such as degree of strength and water resistance and on the manufacturing process were investigated. In addition, the results were compared with those of acrylic emulsion. The test results showed that polyester type polyol demonstrated stronger tensile strength and higher water resistance with time than did acrylic emulsion and polyether type polyol.

Radiation Grafting of Hydrophilic Monomers onto Polyester

  • Park, Jae-Ho;Lee, Chong-Kwang;Lee, Kwang-Jin
    • Nuclear Engineering and Technology
    • /
    • v.5 no.2
    • /
    • pp.103-114
    • /
    • 1973
  • Radiation grafting of acrylic acid and 4-vinylpyridine at room temperature has been studied by an impregnation method to improve the hygroscopic properties, the antistatic behavior and the dyeability of polyester fabric. Polyester fabric was impregnated with acrylic acid or aqueous emulsion of acrylic acid-4-vinylpyridine by immersion at 25$^{\circ}$or 7$0^{\circ}C$. The impregnated fabric was irradiated under nitrogen gas with ${\gamma}$-rays from Co-60. When acrylic acid grafted polyester fabric was treated with sodium carbonate, calcium acetate and potassium persulfate, tne rate of water absorption was increased and most parts of polyacrylic acid formed were extracted off from the fabric with 0.1% solution of sodium hydroxide at 10$0^{\circ}C$. In the case of the impregnation of a mixture of acrylic acid and 4-vinylpyridine the petcent of grafting has been shown to be proportional to the ratio of 4-VP/AA and radiation dost. Estimating by contact angle measurements of water on the various polymer surfaces, the antistatic behavior was decreased with the increase of grafting percent. The investigation of electron micrograph disclosed the existence of certain type of discontinuities in the acrylic acid grafted polyester fiber which was treated with various salts.

  • PDF

A Study on the Curing Characteristics and the Synthesis of Polyurethane Acrylate Hybrid Emulsion (폴리우레탄 아크릴레이트 하이브리드 에멀젼의 합성 및 경화특성에 관한 연구)

  • Han, Sang-Hoon;Park, Dong-Won
    • Applied Chemistry for Engineering
    • /
    • v.17 no.2
    • /
    • pp.132-137
    • /
    • 2006
  • Polyurethane acrylate hybrid emulsions were prepared by seeded polymerization techniques. In the synthesis, seeded polyurethane dispersion containing a carboxylic group was used to endow hydrophilicity to the hybrid emulsion and various acrylates such as methyl methacrylate (MMA), 2-hydroxy ethylmethacrylate (2-HEMA), n-butyl acrylate (n-BA) and acrylic acid (AAc) were used to endow hydrophobicity. The particle size and distribution of various emulsion particles such as polyurethane acrylate hybrid emulsion, polyurethane dispersion homopolymer, acrylate emulsion, and physical blending emulsion were measured by a particle size analyzer. The average particle size of hybrid emulsion was greater than physical blending emulsion. And tensile strength, 100% modulus, elongation, and swelling properties of the polyurethane acrylate hybrid emulsion were studied and compared with those of polyurethane homopolymer, acrylate emulsion, and physically blended compositor, respectively. To improve chemical and physical resistance, this paper review a melamine hardener and compares it for effects on the physical properties of cured coating.

Study on Water Resistance of Environmentally Friendly Magnesium Oxychloride Cement for Waste Wood Solidification

  • Zhang, Feng-Jun;Sun, Xian-Yang;Li, Xuan;Zhang, Dan;Xie, Wen- Jie;Liu, Jin;Oh, Won-Chun
    • Journal of the Korean Ceramic Society
    • /
    • v.55 no.5
    • /
    • pp.446-451
    • /
    • 2018
  • In this study, different formulations of magnesium oxide and various modifiers (phosphoric acid, ferrous sulfate, pure acrylic emulsion, silicone acrylic emulsion, glass fiber, and polypropylene fiber) were used to prepare magnesium oxychloride cement composites. The compressive strength of the magnesium oxychloride cement was tested, and the softening coefficients of the composites after soaking in water were also calculated. The results showed that a magnesium oxychloride cement sample could not be coagulated when the MgO activity was 24.3%, but the coagulation effect of the magnesium oxide cement sample was excellent when the MgO activity was 69.5%. While pure acrylic emulsion, silicon-acrylic emulsion, and glass fiber showed insignificant modification effects on the magnesium oxychloride cement, ferrous sulfate heptahydrate, phosphoric acid, and polypropylene fiber could effectively improve its water resistance and compressive strength. When the phosphoric acid, ferrous sulfate heptahydrate, and polypropylene fiber contents were 0.47%, 0.73%, and 0.25%, respectively, the softening coefficient of a composite soaked in water reached 0.93 after 7 days, and the compressive strength reached 64.3 MPa.

Synthesis and Emulsion Properties of Self-emulsifiable Polyethylene Waxes (자기유화 폴리에틸렌 왁스의 합성 및 에멀젼 특성 연구)

  • Yang, Jeongin;Lee, Sangjun;Shin, Jihoon;Han, Won Hee;Hong, Min Hyuk;Kim, Young-Wun
    • Applied Chemistry for Engineering
    • /
    • v.28 no.6
    • /
    • pp.670-678
    • /
    • 2017
  • Self-emulsifiable polyethylene (PE) wax was prepared using acrylic acid grafted PE wax with potassium hydroxide and various emulsifiers for the economic production of PE wax emulsion. Modification reaction completion was confirmed that the peak from carbonyl group of acrylic acid disappeared and the new peak from carboxylic acid salts appeared in the FT-IR (Fourier transform infrared) spectrum data. Self-emulsifiable properties of the modified PE wax were investigated by the emulsion size and the stability of wax emulsion without any additional emulsifiers. According to self-emulsifiable properties, the emulsion size and stability were varied on the concentration and structure of the emulsifier. The greater emulsion concentration and hydrophilic poly(ethylene oxide) (PEO) characteristics of the emulsifier resulted in the smaller emulsion size and better emulsion stability. In addition, the use of emulsifiers mixture was more effective to obtain smaller size and uniform distribution of emulsion than that of single emulsifier in PE wax modification reaction. Especially, modified PE wax with OAE-5 and LAE-15 emulsifiers mixture shows excellent performance in terms of the smallest emulsion size ($4.34{\mu}m$) and emulsion stability.

Synthesis of Polyurethane-polyacrylate Hybrid Emulsions (폴리우레탄-폴리아크릴레이트 하이브리드 에멀젼의 제조)

  • Kang, Sang Yong;Kim, Hyung Joong
    • Journal of Adhesion and Interface
    • /
    • v.9 no.1
    • /
    • pp.16-21
    • /
    • 2008
  • Hybrid emulsions consisting of polyurethane and acrylic polymer were prepared by emulsion polymerization of acrylic monomers and polyurethane water dispersions (PUD) as an emulsifier. At first, cationic type of PUD was synthesized with IPDI, PTMG1000, MDEA, and acetic acid. Then, acrylic monomers, such as MMA and n-BA, were copolymerized with the PUD without adding further surfactant. The tensile properties and water resistance increased with increasing acrylic monomer ratio. The hybrid emulsions showed better properties than the emulsions simply blended with the PUD and the acrylic emulsions.

  • PDF

Studies on Synthesis of Acrylic Water Borne Polymer;Synthesis of Poly(vinyl acetate) and Poly(vinyl acetate-co-2-ethylhexyl acrylate) (Aerylic Water Borne Polymer의 합성 연구;Poly(vinyl acetate)와 poly(vinyl acetate-co-2-ethylhexyl acrylate)의 합성 연구)

  • Kim, Sang-Hern
    • Journal of the Korean Applied Science and Technology
    • /
    • v.13 no.2
    • /
    • pp.77-84
    • /
    • 1996
  • Poly(vinyl acetate)와 poly(vinyl acetate-co-2-ethylhexyl acrylate)를 여러 조건에서 semicontinuous emulsion 중합으로 합성하였다. Overall conversion, emulsion 입자크기, pH, 점도 등을 합성한 두 emulsion polymer에 대해 측정하였다. Vinyl acetate monomer에 2-ethylhexyl acrylate를 도입함으로서 emulsion 입도, 점도, 중합 속도, 유리 전이 속도가 감소함을 확인하였다.

A Study on the Inverse Emulsion Polymerization of Anionic Arcrylamide and Acrylic Acid (음이온성 아크릴아미드와 아크릴산의 역유화 중합에 관한 연구)

  • Lee, Ki-Chang;Choi, Hee-Chun;Choi, Bong-Jong;Lee, Kwang-Il
    • Journal of the Korean Applied Science and Technology
    • /
    • v.6 no.1
    • /
    • pp.1-7
    • /
    • 1989
  • To developed new process for obtaining maximum molecular weight of anionic acrylamide and acrylic acid copolymer by inverse emulsion polymerization. Concentration of initiator, reducing agent, surfactant and mole ratio of acrylamide-acrylic acid were studied for the process. Semi-batch processes with method of redox, control of reaction temperature, feeding method of monomer and reaction time, was suitable for maximum molecular weight of P(AMAC) from this process obtained $3.09\;{\time}\;10^6({\bar{M}}n.)$ and $4.41\;{\time}\;10^6({\bar{M}}w.)$ in molecular weight measured by the intrinsic viscosity method. inverse emulsion polymerization mechanism of P(AMAC) does not followed the Smith-Ewart and Medvedev theory, but selected for concentration of initiator, reducing agent, surfactant, water solubility of monomer.

Synthesis of Environmental-Friendly Starch-acrylic Coating Sols by Emulsion Polymerization (유화중합에 의한 친환경 전분-아크릴 코팅졸의 합성)

  • Li, Mei-Chun;Mun, Yoo-Ju;Cho, Ur-Ryong
    • Elastomers and Composites
    • /
    • v.45 no.4
    • /
    • pp.272-279
    • /
    • 2010
  • Starch is an environmental-friendly natural source, more interests are attracted to use starch for synthesis of composites and coating sols. Starch-acrylic coating sols for architectural materials were synthesized by emulsion polymerization. The structures of synthesized materials were characterized by using Infrared spectra, $^1H$-NMR spectra, and physical characteristics were investigated by X-ray diffraction, foaming test, whiteness test, gloss test and tensile strength test. XRD results showed that starch in starch-acrylic copolymer matrix was in an amorphous state. Starch-acrylic emulsion was compounded with 1%, 3%, 5% foaming agent (n-pentane) and 60% $CaCO_3$ solution. The results showed that starch and foaming agent could increase the foamability. Tensile strength increased with the enhancement of starch and foaming agent concentration. But whiteness and gloss decreased with increase of starch and foaming agent concentration.

Flame Characteristics of Surface Part of Composite Emulsion Exterior Finishes (복합 에멀젼 외장마감재 표면부의 화염 특성)

  • Ryu, Hwa-Sung;Shin, Sang-Heon;Song, Sung-Yong;Kim, Deuck Mo
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2019.11a
    • /
    • pp.133-134
    • /
    • 2019
  • As part of recent low-energy policies, thermal insulation standards for buildings are being tightened every year. The importance of external insulation methods is increasing due to the strengthening of insulation standards. Among the main materials used in the external insulation method, dry bit material is a finishing material composed of an organic binder and aggregate. When the fire occurs, the ignition of the surface part causes a direct fire on the thermal insulation material at the rear side when heat energy is concentrated. Therefore, it is important that the finishing material in dry insulation using a dry bit has a low fire spreading property in case of a fire and does not have a sustained combustion. The purpose of this study was to evaluate the fire spreadability by changing the internal fillers while using alkoxide-based acrylic emulsions, hybrid acrylic emulsions, and general acrylic emulsions in order to suppress the fire spreading properties of exterior finish materials.

  • PDF