• Nuclear Engineering and Technology
• /
• 제5권2호
• /
• pp.103-114
• /
• 1973

본 실험은 방사선을 이용하여 Polyester 직포의 흡수성과 염색성 그리고 대전성을 증진시키기 위한 연구로서 실온하에서 함침법으로 Acrylic acid또는 4-vinylpyridine을 Polyester 직포에 접목시켰다. Polyester 직포를 25$^{\circ}$또는 7$0^{\circ}C$에서 Acrylic acid나 Acrylic acid와 4-vinylpyridine의 emulsion 용액에 함침시켰으며 함침된 Polyester 직포를 질소깨스 존재 하에서 Co-60의 l-rays로 조사시켰다. Acrylic acid가 접목된 Polyester 직포를 Sodium carbonate, Calcium acetate 또는 Potassium persulfate로 처리하였을 때 흡수율은 더욱 증가하였으며 직포 표면에 형성된 polyacrylic acid 는 0.1% NaoH 용액으로 대부분 추출되었다. 4-vinylpyridine과 Acrylic acid의 혼합용액을 함침용액으로 사용하였을 경우 4-VP/AA의 비율과 방사선 선량이 커짐에 따라 접목율은 점점 증가함을 보여주었다. 여러가지로 처리된 Polyester 직포 표면에 물방울을 떨어 뜨렸을 때의 Contact angle을 측정하여 보니 접목율이 증가함에 따라 대전성은 감소하였다. Acryli acid가 접목된 Polyester 섬유를 Salt로 처리하여 전자 현미경으로 관찰하여 본 결과 일련의 무정형 형태로 결합되어 있었다.

• 한국염색가공학회지
• /
• 제15권3호
• /
• pp.154-160
• /
• 2003

Polypropylene nonwoven fabrics were grafted with acrylic acid by a preirradiation method by using electron beam accelerator. The effect of irradiation dose, storage time, concentration of acrylic acid, reaction temperature, reaction time and Mohr's salt concentration on the degree of grafting were investigated in detail. The grafted Polypropylene nonwoven fabrics were characterized using IR spectroscopy and SEM. The results showed that the degree of grafting increased with increasing absorbed dose and the Mohr's salt in the acrylic acid solution promoted grafting efficiency.

• 방사선산업학회지
• /
• 제8권1호
• /
• pp.53-57
• /
• 2014

The kenaf is quickly developing as a renewable resource. Kenaf can be grown under a wide range of weather conditions. Modification of kenaf fiber by graft polymerization provides a significant route to alter the chemical properties, including surface hydrophilicity or hydrophobicity. In this study, kenaf fiber surfaces were grafted with acrylic acid as a hydrophilic group using electron beam irradiation. The grafting rate increased with an increase in grafting time. The FT-IR results confirmed that acrylic acid was successfully grafted onto the kenaf fibers. The wettability of the kenaf fiber was increased, accompanied by acylic acid grafting on the fiber surface. According to the permeability test result, it was found that acrylic acid grafted kenaf fiber reinforced cement composite was more reduced than non-grafted kenaf fiber reinforced cement composite.

• 한국의류산업학회지
• /
• 제6권3호
• /
• pp.384-392
• /
• 2004

The purpose of this study is in development of effective filter-type polymer adsorbent for removal of pollutants from wastewater by UV irradiation graft polymerization. Photografting of acrylic acid (AA) on polypropylene (PP) nonwoven fabric using benzophenone (BP) as a photosensitizer was investigated. Inhibition of homopolymerization was achieved by adding various concentrations of $FeSO_4{\cdot}7H_2O$, $CuSO_4{\cdot}5H_2O$ and Mohr's salt. As AA concentration was increased, the degree of grafting was increased as to a specific value and then decreased, and the effect of BP concentration showed the same tendency. It was also found that the degree of grafting increased with reaction time and reaction temperature. Addition of the polyfunctional monomers and $H_2SO_4$ to the grafting system accelerated the photografting. The melting temperature, molecular weight and breaking stress and breaking strain were decreased with the increase in the degree of grafting.

• 한국환경과학회지
• /
• 제23권1호
• /
• pp.105-112
• /
• 2014

With the incorporation of hydrogen peroxide($H_2O_2$) and NaLS as an initiator and emulsifier, acrylic acid monomer was graft copolymerized with sodium alginate prepared from alginic acid, and then the grafted copolymer was confirmed through IR spectrometer. When the amounts of acrylic acid increased the grafting also showed increasing trend. While the contents of hydrogen peroxide was varied in the aqueous sodium alginate solution, the grafting efficiency decreased gradually as the amounts of initiator increased.

• The International Journal of Costume Culture
• /
• 제6권2호
• /
• pp.134-146
• /
• 2003

Polyester of linear homopolymer poly(ethylene terephthalate)(PET) was chemically modified through the formation of branched copolymer to improve the undesirable properties of fiber. Photo-induced graft copolymerization of the acrylic monomers acrylic acid (AA) and methyl acrylate (MA) in the liquid and vapor phase, respectively, onto N,N-dimetylformamide (DMF)-pretreated PET fibers was carried out. The effect of various synthesis conditions and DMF pretreatment of the PET on the graft yield was investigated. Grafting mechanism was analysed. The grafting was promoted by increasing DMF pretreatment temperature and amount of DMF retention in the fiber. The increasing biacetyl and monomer flow time, and irradiation time enhanced the grafting up to a certain amount and thereafter it decreased.

• Nuclear Engineering and Technology
• /
• 제9권2호
• /
• pp.65-74
• /
• 1977

High dose rates꼭 전자선을 이용하여 Polyester 직포에 acrylic acid를 중합 반응시켰다. Homopolymerization inhibitor로서 cation 을 첨가시키면 hoinopolymerization 뿐만 아니라 graft효율도 감소되었다. Graft 중합 반응 속도는 선량율이 1.6$\times$$10^{6}$rad/sec에서부터 10$\times$$10^{6}$ rad/sec 사이에서 선량율의 0.82승에 비례하였다. Acrylic acid가 graft 중합 반응된 Polyester 직포는 흡습성, 제전성 효과 등이 크게 증진되었다.

• 공업화학
• /
• 제7권1호
• /
• pp.75-82
• /
• 1996

전자선과 ${\gamma}$선으로 방사선조사하여 폴리에틸렌 필름에 과산화물을 형성시킨 다음 산과 $FeSO_4(NH_4)_2SO_4{\cdot}6H_2O$와 존재하에서 아크릴산을 그라프트반응시켰다. $FeSO_4(NH_4)_2SO_4{\cdot}6H_2O$와 황산의 첨가효과와 그라프트 반응메카니즘을 검토하고, 이들 그라프트필름의 물리적 특성을 검토하였다. 과산화물법에 의한 그라프트반응에서 $FeSO_4(NH_4)_2SO_4{\cdot}6H_2O$와 산을 동시에 첨가하면 $FeSO_4(NH_4)_2SO_4{\cdot}6H_2O$만 첨가한 것보다 월등히 그라프트율이 향상되었고, $FeSO_4(NH_4)_2SO_4{\cdot}6H_2O$를 첨가하지 않고 산만을 첨가하면 과다한 단일 중합체의 형성으로 그라프트반응을 시킬 수 없었다. 산중에서 $H_2SO_4$와 HCl의 첨가효과는 $HNO_3$와 $CH_3COOH$보다 월등히 컸으며, 같은 조사선량으로 ${\gamma}$선과 전자선 조사한 폴리에틸렌에 대한 아크릴산의 그라프트반응에서 ${\gamma}$선 조사한 시료의 그라프트율이 전자선 조사한 것보다 높았다.

• 공업화학
• /
• 제8권6호
• /
• pp.934-938
• /
• 1997

셀룰로오스에 공기중에서 $\gamma$-선을 조사한 후 상온에서 20일 동안 보관하여 과산화물을 형성시킨 다음, 산과 금속염 존재하에서 아크릴산과 접촉시켜 그라프트 반응을 수행할 때 금속염과 산의 첨가효과에 대하여 고찰하였다. 그라프트 반응시 산과 금속염을 그라프트 용액에 동시에 첨가하면 금속염만 첨가한 경우보다 그라프트율은 향상되었고 반응온도가 높은 경우에 높은 그라프트율을 나타내었으며 사용한 금속염중에서 $CuSO_4{\cdot}5H_2O$보다는 $FeSO_4{\cdot}7H_2O$가 그라프트 반응에 효과적이었다. 산의 종류에 따른 첨가효과는 $H_2SO_4>HCl>HNO_3>CH_3COOH$순 이었으며, 황산을 첨가한 경우 $7{\times}10^{-2}$몰 농도까지는 계속 상승하였으나 그 이상부터는 거의 변화가 없었다.

• Membrane and Water Treatment
• /
• 제6권5호
• /
• pp.411-422
• /
• 2015

Membrane modification by different concentrations of acrylic acid has been described. Grafting of acrylic acid to the surface of a polypropylene membrane was obtained by a Fenton-type reaction. Membrane permeability seemed to have been dependent on the value of pH in the solution. To explain tendency, a simple theoretical model was developed. The model incorporates explicitly statistical conformations of a polyacid chain grafted onto the pore surface. The charged capillary model with a varying diameter for porous membranes was then used to evaluate the permeability of the membrane. It has been shown both theoretically and experimentally that the permeability of a grafted membrane depends on the pH of the solution.