• 한국소음진동공학회논문집
• /
• 제17권4호
• /
• pp.342-349
• /
• 2007

Following the 2002 World-Cup held in Korea, studies have been actively conducted on plans to utilize all-weather stadiums of fine figures, where large-scale spaces are available for various utilizations. In Japan, dome-type stadiums have been built and are utilizing across the whole nation not only for sports events but also variety of other large-scale events. PTFE(poly tetra fluoro ethylene) is one of the membrane material mainly used for the outer ceiling surface of membrane structures. However, there has not been enough research on the acoustical properties of PTFE membrane material which has been widely used in the multi-purpose stadiums. In this study, air permeability values and sound absorption coefficient of PTFE membrane materials were measured and evaluated in the gymnasium. From the results of measurements of sound absorption coefficient and air permeability of inner membrane materials, it was found that the sound absorption coefficient was good in the air permeability range of $5{\sim}15\;cc/cm^2/s$. Also the relation ship between air permeability and sound absorption coefficient was very high and the sound absorption coefficient was the highest in the range of $6{\sim}9\;cc/cm^2/s$. Secondly, an analysis on the measurements sound absorption characteristics of inner membrane material reveals that the overall sound absorption coefficient was stabilized(higher than 0.5 throughout the whole frequency bands) when the air space behind the membrane material was deeper than 600 mm. When PTFE sound absorptive membrane material was installed in the ceiling of gymnasium, it was confirmed that sound absorptive membrane material can reduce reverberation and increase speech intelligibility in the gymnasium.

• Coupled systems mechanics
• /
• 제7권3호
• /
• pp.297-319
• /
• 2018

In this paper, the vibro-acoustic behaviors of vibrational cylindrical shells are investigated by using structural intensity approach. The reducing interior noise method for vibrating cylindrical shells is proposed by altering and redistributing the structural intensity through changing the damping property of the structure. The concept of proposed novel method is based on the properties of structural intensity distribution on cylindrical shells under different load and damping conditions, which can reflects power flow in the structures. In the study, the modal formulas of structural intensity are developed for the steady state vibration of cylindrical shell structures. The detailed formulas of structural intensity are derived by substituting modal quantities, in which the effect of main parameters such as weight coefficients and distribution functions on structure intensity are analyzed and discussed. Numerical simulations are first carried out based on the structural intensity analytical solutions of modal formulas. Through simulating the coupling vibration and acoustical radiation problems of cylindrical shell, the relationship between vibro-acoustic and structural intensity distribution is derived. We find that for cylindrical shell, by properly arranging damping conditions, the structural intensity can be efficiently changed and further the noise property can be improved. The proposed methodology has important implications and potential applications in the vibration and noise control of fuselage structure.

• 한국정보통신학회논문지
• /
• 제19권5호
• /
• pp.1259-1268
• /
• 2015

음향층심도의 변화에 대한 이해는 해양상층에서 수중음향 통신, 음향 토모그레피 및 수중항체를 수색하거나 탐지하는 해군 작전에 많은 영향을 미친다. 일반적으로 음향층심도와 혼합층깊이의 정의는 다르게 내려져있으나 혼합층 깊이가 음향학적으로는 음향층심도와 같다고 할 수 있다. 본 연구에서는 동해에서 가용한 수온-염분 관측자료를 활용하여 연간 음향층심도와 혼합층깊이를 비교해 보았다. 비교를 위해 다양한 혼합층깊이 결정 기준과 방법으로부터 도출된 혼합층깊이 자료를 활용하였다. 분석결과 동해에서 음향층심도는 곡률변화를 이용한 혼합층깊이와 거의 유사하였으나 다른 혼합층깊이 기준을 적용하였을 시는 많은 차이를 보였다. 한편 음향층심도 계산의 정확도를 평가해 보기 위해 음파전달손실 모의 실험을 실시하였다. 이를 통해 음향층심도내에서 음파전달손실이 최소가 되는 최적주파수가 존재함을 확인하였다.

• 비파괴검사학회지
• /
• 제19권5호
• /
• pp.369-377
• /
• 1999

본 연구는 다중박막(multi-layer) 구조 모델에 대한 초음파신호처리 적용으로 접합경계면의 결함검출에 관한 연구이다. 이를 위해서 먼저 반도체 검사법에 의하여 박리(delamination). 다이 균열(die crack) 기포(void)의 유무를 확인할 수 있었고, 각 접합계면에서의 단위 cm당 결함 오차율을 모집군 25%이하에서 0.003%까지 측정 가능하였다. 또한 초음파 화상처리를 이용하여 결함 판독 프로그램을 위한 각 패키지별 화상을 8단계에서 16단계까지 데이터 베이스화할 수 있었고, 최종 결과 화면에서는 결함정도를 확률로 표현 가능하도록 하였으며 기포의 가능성도 추론해 볼 수 있다. 그리고, 박리검사 프로그램(delamination inspection program)에 의하여 결함의 크기와 결함의 원인을 16단계로 추론하고. S.A.T 장치에 귀환(feedback)시킬 수 있는 매개변수를 찾을 수 있었다. 특히, 반도체 결함추출 알고리즘 개발로 반도체 결함검사자동화의 기틀을 마련하였고, 향후 결함을 세분화하고 다양한 반도체 패키지별로 데이터베이스를 구축한다면, 온라인 상태에서 보다 많은 검사를 수행 할 수 있는 인공지능형 자동검사 시스템 구현이 가능할 수 있도록 하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.198-201
• /
• 2001

Porous structures of aluminum foam have been studied by using return aluminum scrap. The apparent foam shape, foam height, density, pore size and their distributions in various section areas of the experimental samples have been investigated. The sample have been cast into metallic mold, using aluminum foam prepared from a precursor based on pure Al ingot and return aluminum scrap mixed with various amounts of 1-2wt% increasing viscosity and foam agent materials. The process provides for flexibility in design of foam structures via relatively easy control over the amount of hydrogen evolution and the drainage processes which occur during foam formation. This is facilitated by manipulating parameters such as the foaming agent, thermal histories during solidification and mix melt viscosities. A metal for producing the foamed are decomposing a foaming agent in a molten metal such that there is an initial and a subsequent expansion due to foaming agent. It has been found that the Al porous foaming with variation amount of 1∼2wt% foam agent and at 2min holding time, which melting temperature has appeared homogeneous pore size at 650∼700$^{\circ}C$. The compression strength were 10-13 kg/min at 125ppi, and increased by higher pore density. The acoustical performance of the panel made with the foamed aluminum is considerably improved; its absorption coefficient shows NRC 0.6-0.8. It has been found that the Al foam is very preferable for the compactness of the thermal system.

• 한국소음진동공학회논문집
• /
• 제12권6호
• /
• pp.437-444
• /
• 2002

This paper is to provide the basic way of a acoustical evaluation and efficient control noise by investigating the limits of perceptual loudness of living environment and by finding out any correlation between Physical characteristics of noise and psychoacoustic parameters. The limits of perceptual loudness were selected by the subjects in a chamber for residential and working environment. And the noise sources were analyzed to find out whether there is any correlation with Zwicker parameters and ACF factors. In this study especially, to set up the domestic evaluation grade about floor impact noise. we'd like to suggest the loudness Perception research result as fundamental resource for setting up the evaluation grade through the result that is based on annoyance. In the result of this research, upper limit of heavy-weight impact noise was L-60, and lower limit of it was L-50. On the other hand, upper limit of light-weight impact noise was L-70, and lower limit of it was L-55. It seemed that the loudness of noise from vacuum cleaner noise does not affect its perceived noisiness. Noises implicated In human such as floor walking noise and talking sound, are the most irritating noise in office environment.

• 비파괴검사학회지
• /
• 제30권5호
• /
• pp.437-443
• /
• 2010

최근 재료, 생물의학(biomedicine), 음향, 전자 등 다양한 분야에서 나노 구조를 갖는 박막 기술이 도입되면서 박막 계면의 수명과 내구성 확보를 위한 초고주파수의 초음파현미경을 이용한 정량적인 비파괴적 접합평가에 관한 연구가 큰 이슈가 되고 있다. 본 연구에서는 초음파의 집속, 누설탄성표면파의 발생과 V(z) 곡선의 시뮬레이션 그리고 초고주파수 음향 이미징 기법을 이용하여 나노 스케일 구조를 갖는 박막 시험편의 접합계면을 평가하였다. V(z) 곡선의 컴퓨터 시뮬레이션을 통하여 접합계면에 존재하는 미세 결함(디라미네이션 등)의 검출 감도를 추정할 수 있었으며, 1 GHz의 초고주파수 디포커싱 모드로 박막 시험편의 접합계면에 존재하는 나노 스케일의 미세 결함을 음향 이미지로 가시화 할 수 있어 나노 구조를 갖는 박막의 접합계면의 비파괴평가에 초음파현미경이 매우 유용함을 알 수 있었다.

• 대한기계학회논문집A
• /
• 제30권2호
• /
• pp.202-209
• /
• 2006

As the economic power is improved and the customer's demand is hard to please, the noise and vibration is the most important yardstick that can determine the quality of the product. Especially, as the airconditioner's demand increase suddenly, the product of quality and the noise is becoming a decisive factor of determining whether purchase the product or not. Therefore, every manufactory is investing a lot of money and research to cut down the unpleasantness induced from noise and vibration. And they are emphasizing their product's difference by advertising a silence very actively. With these reason, the demand of a silent indoor air-conditioner is the essential research filed when the product is develop(:d. In this study, the noise and vibration is visualized in the space and frequency domain by using experimental methods such as operational deflection shape (ODS), modal testing and sound intensity. Also the location of noise source and its characteristic is analyzed in an acoustical point of view to reduce the structure borne noise that come from the fan motor, and the pertinent control method is suggested. Furthermore, the most suitable shape of the motor bracket is suggested by applying FEM and DOE (Design of experiments) in the noise and vibration point a view.

• 대한기계학회논문집B
• /
• 제25권10호
• /
• pp.1327-1336
• /
• 2001

The structural modes driven by the low wave-number components of smooth elastic wall pressure provide a relatively weak coupling between the flow and the wall motion. If the elastic thin plate has any resonant mode whose wave-number of resonance coincides with $\omega$/U$\sub$c/, the power will be transmitted to those modes of vibration by the flows. We examine the problem in which the elastic thin plate is subject to pressure fluctuations under turbulent boundary layer. Measurements are presented of the frequency spectra of the near- and far-field pressures and radiated sound contributed by the various wave modes of the thin elastic plate. Dispersion equation for wave motions of elastic plate is used to investigate the effect of bending waves of relatively low wave number on radiated sound. The low wave-number motion of elastic plate is observed to have much less influence on the low-frequency energy of wall pressure fluctuations than that of the rediated sound. High amplitude events of the wall pressure are observed to weakly couple with high-frequency energy of radiated sound for case of low tension applied to the plate. The sound source localization is applied to the measurement of radiated sound by using acoustic mirror system.

• 수산해양기술연구
• /
• 제52권3호
• /
• pp.276-280
• /
• 2016

This study investigated luring distributions by water layer of common squid which were targeted by angling fishing vessels equipped with LED and metal-halide lamps using a scientific echosounder with a 120 kHz frequency in order to develop energy-effective underwater fish aggregation devices. In the analysis, angles of a transducer were changed from $0^{\circ}$ to $45^{\circ}$ and were rotated every $10^{\circ}$ horizontally. It was shown that common squid were densely distributed from the surface to 40 m and they were also distributed in directions of $10^{\circ}{\sim}+30^{\circ}$, $-30^{\circ}{\sim}-60^{\circ}$, and $-120^{\circ}{\sim}-130^{\circ}$with the head of vessel as the center. Comparative results of angles of transducer on acoustical densities of common squid distributing in 21~40 m water depth showed an average $101.8m^2/nm^2$ in vertical direction of $0^{\circ}$, $12.3m^2/nm^2$ in angle of $30^{\circ}$, and $42.4m^2/nm^2$ in angle of $45^{\circ}$, respectively. It implied that more considerations on acoustic scattering strength by incidence angle direction of the transducer and swimming oriental angle direction of common squid would be required.