• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 학술대회 논문집 전문대학교육위원
• /
• pp.40-43
• /
• 2000

Our studies diagnose insulation degradation using the method of computer sensing system, which has the advantages of PD(partial discharge) and AE(acoustic emission) sensing system. To use advantages of these two methods can be used effectively to search for treeing location and PD in some materials. In analysis method of degradation, using statically operator such as the center of gravity (G), the gradient of the discharge distribution(C), we have analyzed for the prediction of life which we can be obtained the time, occurred of many pulse of small discharge amplitude.

• 한국정보통신학회논문지
• /
• 제15권12호
• /
• pp.2687-2696
• /
• 2011

해양 센서 네트워크에서 클러스터링 문제는 네트워크 수명 및 확장성을 향상시키기 위한 문제 중 하나이다. 본 논문은 모든 노드가 클러스터 헤더를 통하여 싱크 노드로 데이터를 전송하는데 사용되는 전송 에너지를 최소화할 수 있는 클러스터링 문제의 최적 결과를 찾는 알고리즘을 제안한다. 일반적으로 네트워크에서 노드의 수가 증가하면 적절한 클러스터 구성을 위한 계산량은 급격히 늘어나게 된다. 본 논문에서는 적정한 시간 내에 최적의 클러스터 구성을 위한 유전 알고리즘을 제안하며, 효율적인 검색을 위해 유전 알고리즘의 효과적인 이웃해 생성 동작을 제안한다. 제안된 알고리즘은 전송 에너지와 실행시간 관점에서 성능을 평가하며, 평가 결과에서 제안된 알고리즘이 해양 센서 네트워크에서 클러스터를 효과적으로 구성함을 보인다.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권3호
• /
• pp.285-295
• /
• 2016

A contact strip shape of a high speed train pantograph system was optimized with CFD to increase the aerodynamic performance and stability of contact force, and the results were validated by a wind tunnel test. For design of the optimal contact strip shape, a Kriging model and genetic algorithm were used to ensure the global search of the optimal point and reduce the computational cost. To enhance the performance and robustness of the contact strip for high speed pantograph, the drag coefficient and the fluctuation of the lift coefficient along the angle of attack were selected as design objectives. Aerodynamic forces were measured by a load cell and HWA (Hot Wire Anemometer) was used to measure the Strouhal number of wake flow. PIV (Particle Image Velocimetry) was adopted to visualize the flow fields. The optimized contact strip shape was shown a lower drag with smaller fluctuation of vertical lift force than the general shaped contact strip. And the acoustic noise source strength of the optimized contact strip was also reduced. Finally, the reduction amount of drag and noise was assessed when the optimized contact strip was applied to three dimensional pantograph system.

• 한국멀티미디어학회논문지
• /
• 제14권12호
• /
• pp.1572-1582
• /
• 2011

The rapid growth of UnderWater Acoustic Sensor Networks (UW-ASNs) has led researchers to enhance underwater MAC protocols against limitations existing in underwater environment. We propose the customized robust real-time packet inspection mechanism with addressing the problem of the search for the data packet loss and network performance quality analysis in UW-ASNs, and describe our experiences using this approach. The goal of this work is to provide a framework to assess the network real-time performance quality. We propose a customized and adaptive mechanism to detect, monitor and analyze the data packets according to the MAC protocol standards in UW-ASNs. The packet analyzing method and software we propose is easy to implement, maintain, update and enhance. We take input stream as real data packets from sniffer node in capture mode and perform fully analysis. We were interested in developing software and hardware designed tool with the same capabilities which almost all terrestrial network packet sniffers have. Experimental results confirm that the best way to achieve maximum performance requires the most adaptive algorithm. In this paper, we present and offer the proposed packet analyzer, which can be effectively used for implementing underwater MAC protocols.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.952-955
• /
• 2000

Nowadays, Internet is so popular that we can easily access the remote site to search information and to communicate remote site and users. People who want to make a collaborate working environment can use JAVA, CORBA, and other internet programming tools like a Perl/XML. The mechanist are try to make the environment fur collaboration within design/manufacturing, simulation, remote sensing through TCP/IP And many industries and research institutions are working towards the agile manufacturing. This paper describes an internet-based real-Time remote monitoring system. The system consists of a hardware setup and a software interface. The hardware setup consists of a machine and its data acquisition hardware, while the software interface incorporates the data acquisition software, the server program, and the client program. The server program acts as the main interface between the data acquisition system and the internet technology. The client program is to be distributed to the remote users who want to monitor the machining status. The system has been demonstrated and verified for an industrial High-Speed Machine (HSM) especially measuring cutting force and acoustic emission. To share the signal, we make the WWW server and display its value. The system has been found to be highly efficient, reliable and accurate.

• 지구물리와물리탐사
• /
• 제11권1호
• /
• pp.15-25
• /
• 2008

지각구조 연구에서 해저면 지진계(OBS)의 위치정보는 OBS-에어건 탄성파 탐사에 있어서 매우 중요한 변수들중의 하나이다. 이 변수의 정확도을 향상시키기 위해 우리는 이용 가능한 음향 트랜스폰더에 의한 거리 정보와 함께 에어건 발파 자료와 수심 자료를 이용하여 OBS 위치를 결정하는 새로운 방법을 개발하였다. 음향 트랜스폰더로 얻은 거리 자료가 3 지점 미만의 것일 때에는 에어건 발파에 의해 발생하여 OBS에 기록된 수중 직접파의 주시가 OBS 위치 결정에 매우 중요한 정보로 활용된다. 그 새로운 방법은 두 단계로 이루어져 있다. 첫 번째 단계에서는 광역 검색이 이루어지는데 이는 수심 격자상에서 에어건 발파로부터 나온 수중 직접파의 관측 주시와 트랜스폰더 시스템을 사용하여 얻은 음향 거리로 설명할 수 있는 가장 가까운 노드를 찾는 것이다. 만약 OBS가 위치한 해저면 지형이 매우 험하다면 정밀한 2D 수심 데이터의 사용이 가장 중요하다. 국부적으로 수렴하는 최소값에 빠지지 않기 위해 첫 번째 단계에서 얻은 노드의 위치는 두 번째 단계의 초기값으로 사용된다. 두 번째 단계에서는 비선형 역산법이 수행된다. 만일 OBS의 내부 시계가 큰 편차를 보인다면 이 방법을 사용한 최종 OBS 위치와 함께 내부 시계에 대한 보정 또한 이루어져야 한다. 우리는 여기에서 OBS 위치 결정에 사용한 각 측정값의 영향과 오차에 대해서도 토론하고자 한다.

• Transactions on Electrical and Electronic Materials
• /
• 제13권2호
• /
• pp.51-59
• /
• 2012

Piezoelectric langasite crystals have superior properties such as high temperature performance and high quality Q and can be applied in combustion pressure sensors and surface acoustic wave (SAW) filters. Crystal growth, crystal structure and properties of langasite group are reviewed, and the mechanism of piezoelectricity of langasite is presented based on the crystal structure and deformation under high pressure. Finally, for the discovery of new piezoelectric materials, this paper presents the role of the framework, and recommends the search of framework crystal structure, because the characteristic of the mechanism exists on the framework of the crystal structure.

• The Journal of the Acoustical Society of Korea
• /
• 제15권3E호
• /
• pp.60-65
• /
• 1996

This paper describes on the Korean continuous speech recognition system for flight reservation. It adopts a frame-synchronous One-Pass DP search algorithm driven by syntactic constraints of context free grammar(CFG). For recognition, 48 phoneme-like units(PLU) were defined and used as basic units for acoustic modeling of Korean. This modeling was conducted using a HMM technique, where each model has 4-states 3-continuous output probability distributions and 3-discrete-duration distributions. Language modeling by CFG was also applied to the task domain of flight reservation, which consisted of 346 words and 422 rewriting rules. In the tests, the sentence recognition rate of 62.6% was obtained after speaker adaptation.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2004년도 추계학술대회
• /
• pp.323-330
• /
• 2004

As mobile market grows more and more fast, the mobile contents market, especially music contents for mobile phones have recorded remarkable growth. In spite of this rapid growth, mobile web users experience high levels of frustration to search the desired music. New musics are very profitable to the content providers, but the existing collaborative filtering (CF) system can't recommend them. To solve these problems, we propose an extended CF system to reflect the user's real preference by representing the characteristics of users and musics in the feature space. We represent the musics using the music contents based acoustic features in multi-dimensional feature space, and then select a neighborhood with the distance based function. Furthermore, this paper suggests a recommendation for procedure for new music by matching new music with other users' preference. The suggested procedure is explained step by step with an illustration example.

• 말소리와 음성과학
• /
• 제2권4호
• /
• pp.137-143
• /
• 2010

In this paper, a speech endpoint detection algorithm is proposed. The proposed algorithm is a kind of state transition-based ones for speech detection. To reject short-duration acoustic pulses which can be considered noises, it utilizes duration information of all detected pulses. For the optimization of parameters related with pulse lengths and energy threshold to detect speech intervals, an exhaustive search scheme is adopted while speech recognition rates are used as its performance index. Experimental results show that the proposed algorithm outperforms the baseline state-based endpoint detection algorithm. At 5 dB input SNR for the beamforming input, the word recognition accuracies of its outputs were 78.5% for human voice noises and 81.1% for music noises.