• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.73-78
• /
• 2000

On this study, the fatigue crack propagation of super duplex stainless steel is investigated in conditions of various volume fraction of austenite phase by changing heat treatment temperature. And we analysed acoustic emission signals during the fatigue test by time-frequency analysis methods. As the temperature of heat treatment increased, volume fraction of austenite decreased and coarse grain was obtained. The specimen heat treated at $1200^{\circ}C$ had longer fatigue life and slower rate of crack growth. As a result of time-frequency analyze of acoustic emission signals during fatigue test, main frequency was $200{\sim}300kHz$ having no correlation with heat treatment and crack length, and 500kHz was obtained by dimple and separate of inclusion

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.6 no.1
• /
• pp.22-26
• /
• 1995

Change of voice, espicially hoarseness show irregular vibration of vocal cord. So, computerized acoustic analysis has presented many acoustic parameters for objective evaluation of voice. We objectively investigated the vocal vibration of normal persons and hoarseness patients in Korea. The RAP(relative average perturbation), PPQ(pitch period perturbation quotient) and APQ(amplitude perturbation quotient) of normal persons were compared with that of hoarseness patients with multidimensional voice program for the possibility of distinguishing the pathologic vocal vibration from normal. Authors agree that RAP, PPQ and APQ showed interesting differences between the normal and the hoarseness patients by the multivariate statistical analysis. In conculusion, relative average perturbation, pitch period perturbation and amplitude perturbation quotient might be meangingful screening parameters distinguishing hoarseness patients from normal.

• Journal of ILASS-Korea
• /
• v.28 no.3
• /
• pp.119-125
• /
• 2023

In this research, a network model was developed to predict combustion instability in an annular gas turbine combustor (GT24) for power generation. The model consisted of various acoustic elements such as several ducts and area changes which could represent a real combustor with a complex geometry, applied mass, momentum, and energy equations to each element. In addition, a one-dimensional network model through a cylindrical coordinate system has been proposed to predict various acoustic modes. As a result of the analysis, the key resonant frequencies such as longitudinal, circumferential, and complex modes were derived from the EV combustor of GT24, and the reliability of the current model was verified through comparison with the 3D Helmholtz solver.

• International Journal of Aeronautical and Space Sciences
• /
• v.13 no.2
• /
• pp.127-153
• /
• 2012

This paper presents an advanced computational method for the prediction of the responses in the frequency domain of general linear dissipative structural-acoustic and fluid-structure systems, in the low-and medium-frequency domains and this includes uncertainty quantification. The system under consideration is constituted of a deformable dissipative structure that is coupled with an internal dissipative acoustic fluid. This includes wall acoustic impedances and it is surrounded by an infinite acoustic fluid. The system is submitted to given internal and external acoustic sources and to the prescribed mechanical forces. An efficient reduced-order computational model is constructed by using a finite element discretization for the structure and an internal acoustic fluid. The external acoustic fluid is treated by using an appropriate boundary element method in the frequency domain. All the required modeling aspects for the analysis of the medium-frequency domain have been introduced namely, a viscoelastic behavior for the structure, an appropriate dissipative model for the internal acoustic fluid that includes wall acoustic impedance and a model of uncertainty in particular for the modeling errors. This advanced computational formulation, corresponding to new extensions and complements with respect to the state-of-the-art are well adapted for the development of a new generation of software, in particular for parallel computers.

• Biomedical Science Letters
• /
• v.22 no.4
• /
• pp.115-126
• /
• 2016

Audiometric calibration is a prerequisite for securing the reliability of audiometric test results by checking the internal consistency of the relevant instrument. The purpose of this review is to help instrument operators understand the calibration procedure of aural acoustic immittance instrument which is frequently used for objective assessment. By referring to the latest international standards and the national standards relevant to the aural acoustic immittance instrument, the following parameters will be reviewed: 1) introduction of performance characteristics, 2) detailed procedure of the calibration method. According to the newest international and national standards [IEC 60645-5 (2004), ANSI S3.39-1987 (R2012)], the aural acoustic immittance instrument basically includes six components: 1) calibration cavity, 2) acoustic immittance analysis system, 3) probe assembly/unit and signal, 4) pneumatic air-pressure pump system, 5) acoustic reflex activator system and 6) tympanogram and acoustic reflex plotting system, each of these components should meet set standards. The result of behavioral hearing tests is influenced by various complex factors including the examinee's cooperation, background noise of the examination room, measurement method, skill level of the audiologist and calibration status, but the objective hearing tests is more influenced by the calibration status of the instrument than any other factors. The audiologist should take full responsibility for the reliability of the hearing test result, so he/she should carry out the calibration check and adjustments of aural acoustic immittance instrument periodically and maintain the instrument continuously by referring to the newest standards and the manufacturer's instruction manual.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.6
• /
• pp.440-446
• /
• 2015

Acoustic signal is emitted from a vessel and received by a cylindrical array sensor at some distance from the vessel. Acoustic signal is the source for a cylindrical array sensor which is designed to detect the acoustic signal. Cylindrical array sensors seldom have an ideal hydrodynamic shape and are not sufficiently robust to survive without some protection and they are normally housed in a sonar dome. Reflected signals by some structure inside a sonar dome make unwanted signals. Therefore, an acoustic baffle is used to minimize unwanted signals. The performance of the acoustic baffles can be determined from the acoustic numerical analysis at the design stage. In this study, finite element method was used to analyze the acoustic field around the cylindrical array sensor and baffle effects. The baffle performance can be defined the echo reduction. To show the baffle performance, the specimens were made for pulse tube test and echo reductions were measured during the test. In this paper, the effect of echo reduction of the acoustic baffle was discussed.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.1
• /
• pp.1-6
• /
• 2006

The Possibility of using acoustic impedance as an input Parameter for computation of underwater acoustic field in shallow waters was investigated. Analysis of the acoustic reflection from the ocean bottom with shear wave effect showed that acoustic impedances below the critical grazing angle have nearly angle-independent property and could be approximated with a single value of near-grazing impedance $Z_0$. Computations of the Propagation loss based on the concept of 'effective depth' indicate that near-grazing bottom acoustic impedances could be used as an input parameter for simulation of the acoustic fields in shallow waters.

• MALSORI
• /
• v.55
• /
• pp.45-60
• /
• 2005

The purpose of this paper is to represent values of acoustic cues for Korean oral stops in the multi-dimensional space, and to attempt to find possible relationships among acoustic cues through correlation analyses. The acoustic cues used for differentiation of 3 types of Korean stops are closure duration, voice onset time and fundamental frequency of a vowel after a stop. The values of these cues are plotted in the two and three dimensional space to see what the critical cues are for separation of different types of stops. Correlation coefficient analyses show that multi-variate approach to statistical analysis is legitimate, and that there are statistically significant relationships among acoustic cues but Oey are not strong enough to make the conjecture that there is a possible relationship among the articulatory or laryngeal mechanisms employed by the acoustic cues.

• The KIPS Transactions:PartD
• /
• v.19D no.3
• /
• pp.211-220
• /
• 2012

Recently K-Pop gained worldwide sensational popularity, no longer limited to the domestic pop music scene. One of the main causes can be that K-Pop mostly are "Hook Song" which has the "hook effect": a certain melody or/and rhythm is repeated up to 70 times in one song so that it hooks the ear of the listener. Also, visual effects by K-Pop dance group are supposed to contribute to gaining the popularity. In this paper, we propose a method which traces the changes of preference for Korean pop music according to the passing of time and investigates the causes using acoustic signal analysis. For this, experiments in acoustic signal analysis are performed on Korean pop music of from popular female singers in 1960s to those as of this date. Experimental results by applying acoustic signal processing techniques show that the periods discrimination is possible based on scientific evidences. Also, quantitative, objective and numerical data based on acoustic signal processing techniques are extracted compared with the pre-existing methods such as subjective and statistical data.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.1
• /
• pp.112-122
• /
• 1995

본 연구에서는 절삭공구가 채터진동을 일으킬때 AE(Acoustic Emission) 신호와 어떤관계가 있는지를 실험적으로 연구하였다. 모달분석을 통하여 절삭공구의 고유진동수 및 모우드형상을 구하였으며, 실제 절삭실험에서는 이송방향 및 절삭방향의 가속도를 계측하여 위상치를 결정하었다. AE신호와 두 가속도 와의 관계를 알기위하여 AE 실험을 하였다. AE신호의 폭발점은 대개 Lissajous loop의 방향전환점에서 관찰 되었다.