Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
/
v.6
no.1
/
pp.9-15
/
1995
Bowing of the vocal cords may be due to aging. atrophy. bilateral superior laryngeal nerve paralysis. injudicious vocal cord surgery, of an idiopathic cause. The bowing usually produces a dysphonia characterized by breathiness due to air escape : however, it can produce aphonia. This report reviews vocal function after surgical correction of bowing of the vocal cords for diagnosis and management. The vocal function of 13 patients with sulcus vocalis and 12 patients with vocal cord atrophy was evaluated with the use of a test battery of multidimensional evaluation items. The voice was improved postoperatively in most patients. The voice improvement was reflected objectively in maximum phonation time, mean air flow rate during phonation, stroboscopic findings. sound pressure level range and fundamental frequency range of phonation, and results of acoustic analyses of tape-recorded voice. The vocal function after surgical correction of the sulcus vocalis and vocal cord atrophy was improved postoperatively in most patient, but the results were not satisfactory.
In this study, we conducted experimental tests to evaluate fracture behaviors of fresh-butt welded metal by Acoustic Emission technique. We selected similar welding and dissimilar welding process, the one welded for SM45C, SS41 and SUS304 of each material, the other for SM45C and SS41, SM45C and SUS304 and SS41 and SUS304. The fracturing processes of weld metal were estimatied through the fracture toughness test with compact tension specimens and fractography analysis. In ASTM test method E-399, type I curves for materials of this study were obtained by load-cod diagram of fracture toughness test. and 5% offset load( $P_{5}$) was estimated as the estimated crack initial load( $P_{Q}$), The estimated crack initial load( $P_{Q}$) of similar welding materials generally lower than base matal, and then SM45C appeared greatly in decreasing rate of PB, SS41 and SUS304 appeared in order. $P_{Q}$ of dissimilar welding materials were lower than the similar welding materials. $P_{Q}$ of welding of SM45C and SS41 appeared in small, SUS304 and SS41 appeared greatly in dissimilar welding materials. In fracture toughness test, AE counts increased before the inflection point of the slope, decreased after that. It was found that increasing of AE counts were due to the microcrack formation at the crack tip near the $P_{5}$ point through AE data. For welding materials in this study, both low and high AE amplitude appeared simulataneously. It was confirmed that the low AE amplotude was due to formation of micro void, micro crack or micro dimple, the high AE amplitude was caused by microvoid coalescence and quasi-cleavage fracture through analyses of fractograpy.apy.apy.apy.
Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
/
v.18
no.2
/
pp.36-43
/
2004
In this paper, the frequency spectra from respective mechanical noise signals detected using ultrasonic wave and AE(Acoustic Emission) sensor were analysed to under spark generation between brush and commutator side with arbitrarily 15$^{\circ}$ rotation for brush from the DC motor in operation. Also, the frequency spectra from respective magnetizing noise signals detected using ultrasonic wave and AE sensor were analysed to under neutral point for brush from the DC motor in normal operation. And the analyses and comparison between the mechanical noise signal and magnetizing noise signal of ultrasonic wave with brush location change from the DC motor in operation. As the experimental results, tile mechanical noise signal of ultrasonic wave under spark generation between brush and commutator side with brush location change from the DC motor in operation were increased about 2.5∼3.0 times than magnetizing noise signal of ultrasonic wave form the DC motor in normal operation. Also, the main frequency band for mechanical noise signals of AE under spark generation between brush and commutator side with brush location change from the DC motor in operation, appeared about 1.3[MHz]∼l.5[MHz] by the fast fourier transform.
This study compared $F_{0}$ and the first three formants of eight Korean monophthongs produced by nine transgenders (male to female) to those of eighteen normal adults. Voice analysis was done by Praat (version 4.049). A one-way ANOVA with Tukey HSD post hoc tests were performed to determine statistical differences in $F_{0}$ and formant values obtained from transgenders, and normal male and female subjects. Results indicated that there was no significant difference in $F_{1}$ of /u/, /$\Lambda$/, and /o/, $F_{2}$ of /u/, /$\Lambda$/, and /i/ and $F_{3}$ of /u/ among the 3 groups (transgenders, normal males and normal females). However, in the comparison of transgenders vs. males, a significant difference was observed in $F_{0}$ of /o/, and $F_{2}$ of /i/, /a/, /e/, and /${\ae}$/ and $F_{3}$ of /e/. Furthermore, in the comparison of transgenders vs. females, a significant difference was also observed in $F_{0}$ of all vowels, $F_{1}$ of /i/, /$\alpha$/, /e/, /${\ae}$/, and /i/. $F_{2}$ of /i/, and /${\ae}$/, and $F_{3}$ of /i/, /$\alpha$/, /$\Lambda$/, /e/, /${\ae}$/, /i/, and /o/. Also, perceptual judgment of the transgenders' voice came out somewhat correlated strongly with their $F_{0}$ values but not much with the formant values. It was concluded that the transgenders' acoustic parameters are placed in between those of the normal males and females in. terms of fundamental and formant frequency analyses of vowels. Thus, it was assumed that those differences might stem from the transgenders' original big resonating cavities.
Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
/
v.16
no.2
/
pp.129-134
/
2005
Background and Objectives : Artecoll(R) is an injectable soft tissue filler, which is a suspension of polymethylmethacrylate microspheres in $3.5\%$ bovine collagen solution. The authors aimed to determine the clinical of Artecoll of Artecoll(R) as an injection material into the vocal fold to correct the glottal insufficiency caused by unilateral vocal cord paralysis. Materials and Methods : Forty-one consecutive patients with unilateral vocal cord paralysis received percutaneous Artecoll injections under local anesthesia. Acoustic, aerodynamic and stroboscopic analyses were prospectively provided before, 1 week and 3 months after injection. Perceptual GRBAS grading by speech language pathologists and subjective ratings of the hoarseness and aspiration by the patients were also obtained. Results : Aerodynamic parameter(maximal phonation time) were significantly improved after the injection (p<0.05). Acoustic parameters (jitter and shimmer) were improved at the 3rd month follow-up. GRBAS uading and patients own subjective scaling of hoarseness and aspiration also showed significant improvement (p<0.05). Early or delayed significant side effects were not observed. Conclusion : Vocal fold injection with Artecoll is a convenient, safe and useful method of temporarily correcting the glottal insufficiency. Further long-term follow-up studies will answer the usefulness and safety of the Artecoll injection laryngoplasty.
The purpose of this study is to first discriminate and assess those infants who appear healthy in appearance but who could face possible risk factors in the future and, secondly, to identify those infants who may have difficulties in their developmental stages. The subjects of this study consisted of 35 full-term infants (39-40 weeks) and 33 pre-term infants (34-35 weeks). The infants' voices were recorded for three minutes, for which EDIROL by Roland and a stand-type microphone made by SONY were used. This was done to discern the value of the Breath unit (B-unit) and the fundamental frequencies ($F_0$). It was found that there were significant differences in terms of F0 since the pre-term infants had higher F0 than the full-term infants, showing a result of 436.4 Hz for the full-term infants and 460 Hz for the pre-term infants (p<.05) There was an average rate of 4.01 for the full-term infants and 4.02 (SD=1.69) for the pre-term infants in shimmer. For NHR, it was observed .44 for the full-term infants and .50 for the pre-term infants, thus revealing no significant differences in these observations. This study shows that the crying of newborn babies is related to their physical conditions and it is a sensatory response to these conditions. Furthermore, this study could be helpful for the early detection and measurement of newborn babies who look clinically healthy but could be at risk through acoustic and physiological analyses.
Kim, Jinsook;Shin, Yerim;Lee, Seungwan;Lee, Eunsung;Han, Woojae;Lee, Jihyeon
Journal of Audiology & Otology
/
v.25
no.4
/
pp.189-198
/
2021
Background and Objectives: This study aimed to investigate the occupational performance of Korean workers with and without hearing loss and analyze the hearing-related difficulties in the working environment. Subjects and Methods: The Amsterdam checklist for hearing and work was used for the analyses and the occupational environments of the Korean workers were investigated. Out of 129 total participants, 86 workers experienced severe to profound hearing loss and 43 had the normal hearing ability. The hearing-impaired workers were recruited from two leading vocational centers and normal-hearing workers were their colleagues. Results: The hearing-impaired workers were found to take fewer sick leaves and exhibited higher rates of permanent job statuses compared to the normal-hearing workers. Workers with hearing loss rarely detected background sound; however, they could perceive reverberation more frequently. They felt more satisfied with their careers than the normal hearing workers as they received social support and needed to put their effort into hearing for most hearing activities. Furthermore, the effort in hearing increased with the increase in job demand, job control, social support, and career satisfaction. The working hours per week increased with the increase in age, education level, job demand, job control, and social support. Different trends were observed in 9 out of 12 variables while comparing the data from the present study with that obtained from the hearing-impaired workers of the Netherlands, indicating a large difference between countries. Conclusions: Although the hearing-impaired Korean workers operate diligently with good job positions, it is necessary to enhance their acoustic environment and provide them social support. Considering the cultural background of the hearing-impaired workers, the development of suitable vocational rehabilitation programs and specific questionnaires is strongly recommended worldwide.
Kim, Jinsook;Shin, Yerim;Lee, Seungwan;Lee, Eunsung;Han, Woojae;Lee, Jihyeon
Korean Journal of Audiology
/
v.25
no.4
/
pp.189-199
/
2021
Background and Objectives: This study aimed to investigate the occupational performance of Korean workers with and without hearing loss and analyze the hearing-related difficulties in the working environment. Subjects and Methods: The Amsterdam checklist for hearing and work was used for the analyses and the occupational environments of the Korean workers were investigated. Out of 129 total participants, 86 workers experienced severe to profound hearing loss and 43 had the normal hearing ability. The hearing-impaired workers were recruited from two leading vocational centers and normal-hearing workers were their colleagues. Results: The hearing-impaired workers were found to take fewer sick leaves and exhibited higher rates of permanent job statuses compared to the normal-hearing workers. Workers with hearing loss rarely detected background sound; however, they could perceive reverberation more frequently. They felt more satisfied with their careers than the normal hearing workers as they received social support and needed to put their effort into hearing for most hearing activities. Furthermore, the effort in hearing increased with the increase in job demand, job control, social support, and career satisfaction. The working hours per week increased with the increase in age, education level, job demand, job control, and social support. Different trends were observed in 9 out of 12 variables while comparing the data from the present study with that obtained from the hearing-impaired workers of the Netherlands, indicating a large difference between countries. Conclusions: Although the hearing-impaired Korean workers operate diligently with good job positions, it is necessary to enhance their acoustic environment and provide them social support. Considering the cultural background of the hearing-impaired workers, the development of suitable vocational rehabilitation programs and specific questionnaires is strongly recommended worldwide.
Kim, Ji-Soo;Lee, Jae-Young;Seo, Yong-Seok;Ju, Hyeon-Tae
The Journal of Engineering Geology
/
v.23
no.4
/
pp.457-465
/
2013
We integrated and correlated datasets from surface and subsurface geophysics, drilling cores, and engineering geology to identify geological interfaces and characterize the joints and fracture zones within the rock mass. The regional geometry of a geologically weak zone was investigated via a fence projection of electrical resistivity data and a borehole image-processing system. Subsurface discontinuities and intensive fracture zones within the rock mass are delineated by cross-hole seismic tomography and analyses of dip directions in rose diagrams. The dynamic elastic modulus is studied in terms of the P-wave velocity and Poisson's ratio. Subsurface discontinuities, which are conventionally identified using the N value and from core samples, can now be identified from anomalous reflection coefficients (i.e., acoustic impedance contrast) calculated using a pair of well logs, comprising seismic velocity from suspension-PS logging and density from logging. Intensive fracture zones identified in the synthetic seismogram are matched to core loss zones in the drilling core data and to a high concentration of joints in the borehole imaging system. The upper boundaries of fracture zones are correlated to strongly negative amplitude in the synthetic trace, which is constructed by convolution of the optimal Ricker wavelet with a reflection coefficient. The standard deviations of dynamic elastic moduli are higher for fracture zones than for acompact rock mass, due to the wide range of velocities resulting from the large numbers of joints and fractures within the zone.
We examined high-resolution seismic data, side scan sonar data, surface sediments, and vibrocore samples from a sand ridge off the western part of Dukjuk-Do in Gyeonggi Bay, with the aim of interpretation of seismic stratigraphy and sedimentary environment. Based on the seismic data, the deposited sands are divided into three sedimentary units. 14C age data indicate that the top sequence (sequence I) formed at 5000-6000 yr BP, when a transgression resulted in strong shifting tides. Analyses of the vibrocore samples indicate that sequence II is a paleo-mudflat layer of intertidal sediments dominated by mud. Sequence III consists of terrestrial sediments that are presumed to have been deposited at the end of the Pleistocene, unconformably overlying the acoustic bedrock and Mesozoic granite. The side scan sonar data indicate that sand waves were formed on the seabed on top of the sand ridge. Generally, this is the direction of $N20^{\circ}E$, which coincides with the direction of tidal flow. Sand ripples occur away from the top of the sand ridge and are distributed homogeneously across a sandy slope. Vibrocore analyses indicate that the surface sediments and core sediments (samples VC-1, -2, and -3) are homogeneous, without any internal structures, and are characterized by a mixture of medium and fine sand (1-$2{\phi}$), respectively.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.