• Journal of the Korean Society for Precision Engineering
• /
• v.8 no.4
• /
• pp.118-125
• /
• 1991

Acoustic microscopy has attracted much interest recently as potential nondestructive evaluation technique for detecting and sizing defects of surface and sub-surface. Also acoustic emission testing method has been developed for detecting microcracks which is more than 30${\mu}m$ in length quantitatively on ceramics. In the present paper, acoustic emission during the four point bending test in hot-pressed sintered $Si_3N_4$ specimen which was stressed by thermal shock, has been measured by high sensitive sensing system. The surface and sub-surface cracks were detected by scanning acoustic micrscope of 800 MHz and conventional ultrasonic testing in C-scope image. The purpose was to investigate the location and size of cracks by SAM and AE technique, whose experimental data demonstrate good for detecting microcracks.

• Proceedings of the KSPS conference
• /
• 2005.04a
• /
• pp.25-28
• /
• 2005

The purpose of this paper is to represent values of acoustic cues for Korean oral stops in the multi-dimensional space, and to attempt to find possible relationships among acoustic cues through correlation coefficient analyses. The acoustic cues used for differentiation of 3 types of Korean stops are closure duration, voice onset time and fundamental frequency of a vowel after a stop. The values of these cues are plotted in the two and three dimensional space and see what the critical cues are for complete separation of different types of stops. Correlation coefficient analyses show that there are statistically significant relationships among acoustic cues but they are not strong enough to make a conjecture that there is a possible articulatory relationship among the mechanisms employed by the acoustic cues.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.1162-1167
• /
• 2001

Suction valve fluttering is generated by reciprocating motions of the piston inhaling and discharging process of gas in the hermetic compressor. A reactive type suction muffler, which produces high pressure-drop because of its complicated flow path, controls the impulsive noise radiated from the flutter of suction valve. The high-pressure drop in the muffler increases the transmission loss, but reduces the EER(Energy Efficiency Ratio) of the compressor. We consider how to design the high acoustic attenuation and low pressure-drop performance to take account of the acoustic and flow performances of the suction muffler. In this study, we identified the suction noise source of compressor from the measurement of the acoustic pulsation and flutter of suction valve. We analyzed the acoustic characteristics of muffler using the finite element method, and compared the experimental and analytical characteristics of flow path of suction muffler. Theoretical predictions and experimental results are compared from the viewpoint of the acoustic performance and energy efficiency of the compressor.

• Journal of the Korean Society for Railway
• /
• v.7 no.2
• /
• pp.93-98
• /
• 2004

For the reduction and efficient management of railway noise, first of all prediction of railway noise is necessarily requisted. At home and abroad many studies for prediction of railway nearby noise have been accomplished. But it is impossible to predict exactly for the Korean Railway, because the acoustic powers for each rolling stock used in Korea have not been built yet. So in this study, acoustic powers for each Korean rolling stock such as Samaeul, Mugungwha were builded acceding to the speed and rail support systems. Predicted results using the acoustic powers suggested in this study are compared with measured results and it is known that these acoustic powers can be used for precise prediction of railway noise.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.688-691
• /
• 2004

We have studied the possibility of global noise reduction by the sound power control through selection of distribution and impedance of absorptive materials. It is necessary to investigate the relation between the global sound energy in the field and the total sound power radiated by sources. In the previous work (1,2), the authors presented a useful design method to change boundary condition that can be useful to reduce noise in acoustically small enclosures. The possibility of total acoustic potential energy reduction by acoustic source power control is examined in an acoustically small cavity. Using acoustic energy balance equation, the relation between global noise control performance and absorptive material's arrangement/impedance is deduced. Numerical simulation is performed to interpret its physical meaning in terms of absorbent's distribution and impedance.

• Proceedings of the Korean Society for Cognitive Science Conference
• /
• 2010.05a
• /
• pp.42-47
• /
• 2010

Speech shares acoustic features with other sound-based processing, which makes it difficult to distinguish phonological process from acoustic process in speech processing. In this study, we examined the difference between acoustic process and phonological process during repetition tasks. By contrasting various stimuli in different lengths, we localized neural correlates of acoustic process within bilateral superior temporal gyrus, which was consistent with the previous studies. The activated patterns were widely overlapped between words and pseudowords, i.e., contents-free. In contrast, phonological process showed left-lateralized activation in middle temporal gyrus located at anterior temporal areas. It implies that phonological process is contents-specific as shown in our previous study, and at the same time, more language-specific. Thus, we suggest that phonological process is distinguished from acoustic process in that it is always accompanied with the obligatory access to available phonological codes, which can be an entry of the mental lexicon.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.193-198
• /
• 2001

The feasibility of the acoustic emission technique in predicting the residual fatigue life of STS304 stainless steel is presented. Acoustic emission was continuously monitored during the fatigue tests. Considerable acoustic emission occurred during the first few cycles. Acoustic Emission increased rapidly at about 90% of the fatigue life, clear and ample warning of impending fatigue failure was observed. Fatigue damage accumulation was evaluated in terms of an AE cumulative counts. The AE cumulative counts may be taken as an indicator of fatigue cumulative damage. Fatigue damages corresponding to 20, 40, 60 and 80% of the total life were induced at a cyclic stress amplitude. The specimens with and without fatigue damage were subjected to tensile tests. In tensile tests, the total cumulative counts were reduced with increasing fatigue damage. It was observed that the residual tensile strength of material did not change significantly with prior cyclic loading damages.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.607-611
• /
• 2000

Acoustic modal property of the vehicle passenger compartment is a very important factor which dominates vehicle interior noise in the low frequency range. In most real cars, trunk noise often transfers into the passenger compartment since the two cavities are acoustically coupled. This study identifies the major coupling path by examining the variation of the coupled acoustic modal frequencies and modes. An 1/2 size acryl compartment model is designed and manufactured for the measurement and analysis of coupled acoustic modes. Experimental result shows that package tray contributes to the coupling much more than the back seat and hole size of the package tray is an important design factor to control low frequency acoustic modes in the coupled system.

• The Journal of Korea Robotics Society
• /
• v.11 no.3
• /
• pp.146-155
• /
• 2016

Localization of underwater vehicle is essential to use underwater robotic systems for various applications effectively. For this purpose, this paper presents a method of two-dimensional SLAM for underwater vehicles equipped with two hydrophones. The proposed method uses directional angles for underwater acoustic sources. A target signal transmitted from acoustic source is extracted using band-pass filters. Then, directional angles are estimated based on Bayesian process with generalized cross-correlation. The acquired angles are used as measurements for EKF-SLAM to estimate both vehicle location and locations of acoustic sources. Through these processes, the proposed method provides reliable estimation for two dimensional locations of underwater vehicles. Experimental results demonstrate the performance of the proposed method in a real sea environment.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.643-648
• /
• 2011

This paper deals with the ESM(equivalent source method) with the continuation of acoustic near-field for NAH(near-field acoustic holography) to overcome the finite measurement aperture effect and reconstruct the normal velocity on an arbitrarily shaped structure surface. The continuation method is an extension of the measured sound field into a region outside and is based on the Green's function relating acoustic quantities on the two conformal surfaces. This algorithm is not limited to planar surfaces and can be applied to arbitrarily shaped surfaces. The ESM is an alternative approach of BEM-based NAH for the reconstruction on a general structure. In ESM the acoustic field is represented by a set of point sources located over a surface that is close to the structure surface. The simulation results of this study shows that the reconstruction error of particle velocity on the source surface is 11% and 16% for planar and cylindrical sources separately.