• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.6
• /
• pp.726-734
• /
• 2019

The current maritime industry is expected to have a significant impact on the role of maritime-related technologies and systems, especially seafarers, in the rapidly changing Fourth Industrial Revolution. The Maritime Autonomous Surface Ship (MASS) aims to reduce the number of safety accidents and improve seafarers' working environment. With regard to MASS, the International Maritime Organization has been trying to minimize unexpected impact in the maritime education and training sector by establishing international conventions such as the Standards of Training, Certification and Watchkeeping for Seafarers. However, domestic designated educational institutions have not yet established an education and training scheme to develop seafarers who will be on board for MASS. Therefore, this paper reviews the technology of MASS, analyzes the changes in education and training in order to upgrade the qualifications, and suggests the competencies of smart seafarers equipped with the integrated management ability required for Artificial Intelligence, Big Data, Cybersecurity, and the Digital System Revolution through education and training. In addition, this study provides basic information for the education and training of seafarers who are optimized for the rapidly changing technological environment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.483-486
• /
• 2011

Recently, large and small vehicle accidents due to human life and property due to loss of function similar to that used on the plane with a black box mounted on the vehicle by the driver of the vehicle in order to analyze the cause of the accident vehicle you are using a black box. The black box used in the existing operating system, unlike the Android OS portability is good compared to other OS support an open platform for the development of additional costs or proven, which includes many libraries need to use any external libraries there are no advantages. In addition, the existing black box on the incident can not be sent automatically to report an accident notification has a problem. In this paper, another advantage of the OS used in a black box with an Android-based acceleration sensor on the test board GPS module and smart phones using the information, and incident detection capability to send a message to the specified number of black boxes with was implemented.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.51-52
• /
• 2012

Safety at sea continues to be an important topic for research. The factors that contribute to safety issues are often complex and unclear. Lack of non-technical skills in such areas as communication, teamworking, situational awareness, decision making etc. are well documented as directly affecting safety in high risk work settings such as on board merchant vessels. Competence in non-technical skills can be affected by various habits and circumstances that influence a worker and result in either positive thinking and behaviour or negative thinking and behaviour. Negative thinking can cause stress, anger, frustration; loneliness etc. and this can possibly result in behaviour or actions that undermine the safety of crew and ship. Factors that may contribute to these negative thoughts and behaviours are many and varied and this paper will be looking at one aspect: mobile phone use. In the Republic of Korea, dependency on mobile phones is uniquely high. Maritime students are also susceptible to such dependency and this paper will demonstrate that the symptoms associated with mobile phone addiction and dependency, and in particular the symptoms of withdrawal, are important factors that need to be mitigated in order to improve safety at sea. Although the benefits of mobile phones are many it will be suggested that over-reliance, dependency or addiction can result in negative thinking or behaviour that may directly or indirectly contribute to the factors that cause incidents and accidents at sea. It will be suggested that the most appropriate method of dealing with this problem is twofold: firstly, through training at the educational level and secondly, by encouraging the shipping industry and government to invest more into providing seafarers with better access to the communication methods that they are used to on shore in order to improve work conditions.

• Journal of the Korean Institute of Navigation
• /
• v.20 no.2
• /
• pp.1-13
• /
• 1996

Most of the ShipHandling Simulators of full-mission-bridge system need vast area to install and even PC-based maneuvering simulators are often equipped with Steering Wheel or Engine Telegraphe etc. of data input interface, which necessarily makes the user face with excessive financial burden. These have been one of the obstacles for the officers, captains, pilots and students in access to maneuvering simulation whenever they want to try it in advance prior to actual ship maneuvering. Subsequently, all the officers and captains come to have little chances to train themselves until they arualified as a pilot after a long period of time of realship maneuvering practice on board, which means they have to control they have to control their own ship at sea without clear understanding on her maneuverability when they are forced to do it on the way. And these lack of capability for maneuvering have used so often to result in marine casualties of collision with other ships or pier facilities while maneuvering in harbor. To prevent those accidents by means of enhancing their maneuvering ability, PC-based DeskTop Simulator that allows anyong to access readily at anytime is needed and in conformation to such demand this simulator has been developed. The Software this simulator written in Turbo Pascal Ver. 5.0 has adopted MMG mathmatical model theoretically in part and also it was designed to make it possible that all numeric data inputs and outputs with graphic presentation for maneuvering operation be carried out just only with keyboard and monitor console. With the Simulation software, all the officers, captains, pilots and even students who has a proper computer at hand are expected to be able to make an attempt to simulate the maneuvering of their ownship or any other types of them at any port in which they want to do it.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.432-439
• /
• 2020

Brake judder has been identified in some operating military units of Korean Light Tactical Vehicles(KLTV) with In-board brake systems to improve braking performance. Severe vibration generated while driving the vehicle may reduce the KLTV's driving stability and further lead to accidents. For the prevention of this, this study analyzes the root cause through the failure analysis on the vehicles with the brake judder identified. Furthermore, the improvement factor was derived by identifying a vibration transmission path by analyzing the vibration transmission mechanism. The study analysis confirmed that the vibration of the frame during braking in the tactical vehicle is a cold judder phenomenon, which is caused by an increase in disk thickness variation due to rust and foreign substances under excessive brake disc's run-out. In addition, it was confirmed that such vibration can be reduced by improving the mounting structure. So, an improvement method for each factor was suggested and its effectiveness was verified by comparison test. Finally, it is expected that the improvement plans derived through this study can be used in the development of a next military vehicle.

• Fire Science and Engineering
• /
• v.34 no.3
• /
• pp.67-75
• /
• 2020

In this study, the risk of heat generation due to normal and overload currents that vary with the abnormal loosening angle of wire-connecting bolts were identified. The risks were analyzed based on the thermal characteristics to minimize the carbonization accidents of terminal blocks inside distribution panels typically used in industrial sites. We applied a method for measuring the heating temperature and temperature variations in the terminal blocks in real-time by installing a resistance temperature detector sensor board in the terminal block. The experimental results showed that the terminal block model with a low-rated current exhibited a higher heating temperature, thus, confirming the need to select the terminal block capacity based on load currents. Additionally, the higher the rated current of the terminal block with a high-rated current and the higher the degree of loosening, the faster the carbonization point. Such heating temperature monitoring enabled real-time thermal temperature measurement and a step-by-step risk level setting through thermal analysis. The results of the measurement and analysis of carbonization risks can provide a theoretical basis for further research regarding the risk of fire due to carbonization. Furthermore, the deterioration measurement method using the temperature sensor board developed in this study is widely applicable to prevent fires caused by poor electrical contact as well as risk-level management.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.26 no.2
• /
• pp.19-30
• /
• 2020

Purpose: The ratio of the visually impaired is gradually increasing due to various causes such as natural aging, accidents, and environmental changes. Therefore, this study has two folds. Firstly, it aims to analyze the current satisfaction level with information facilities for the visually impaired. Secondly, it aims to examine the factors affecting the satisfaction with indoor information facilities. Through this study, it helps to identify problems of information facilities for the visually impaired and it works as a practical data for further improvements. Methods: For 50 visually impaired people, a telephone survey was conducted on the satisfaction with the braille blocks, braille signboards, braille information boards with tactile map, audio guide devices, and safety egress devices. Microsoft Excel and SPSS 26.0 were used for the analysis. Results: It was confirmed that the overall satisfaction with the indoor information facilities was very low. The more the visually impaired people recognized the installation standards, and the better the maintenance was, the higher the satisfaction. In the case of braille blocks and braille signboards, the effect of information transfer on satisfaction was relatively high. In the case of audio guide device and safety egress device, the standard suitability influenced satisfaction. Implications: The low level of satisfaction with the overall information facilities can impede visually impaired people from receiving practical help through the information facilities. Factors influencing the satisfaction level of each facility were identified, which makes it possible to prepare effective improvement measures.

• Journal of Advanced Navigation Technology
• /
• v.21 no.5
• /
• pp.491-500
• /
• 2017

This paper investigates a low cost dual modular redundancy system based on heartbeat which can be applied to traffic control signal system. Failure of the traffic control signal system can cause traffic confusion and traffic accidents. Therefore safety and reliability of traffic control should be secured using fault tolerance technology. To do this, we configured a redundant board using the open source hardware and the heartbeat technique of Linux HA. The function of the traffic signal control system was verified and the fault recovery time was measured using fault injection test. As a result of the test, the fault recovery time was confirmed to be less than 9 seconds on average, confirming that the reliability target time is satisfied. Based on the results of this study, it is expected that it can be applied to fields requiring high reliability systems such as aviation, space, and nuclear power embedded systems.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.12
• /
• pp.195-200
• /
• 2021

Seafarers play an important role in shipping and logistics. However, seafarers are relatively vulnerable to mental illness because they have to board ships for a considerable period of time and work in isolation. In particular, in the pandemic situation caused by COVID-19, the crew change is delayed due to the closure of many ports around the world, increasing the mental burden on seafarers. The mental health management of the crew is important because these mental problems can lead to major accidents of lives and ships. This paper identified the necessity of mental health management of seafarers through a survey and identified problems with the currently operated mental health management program and curriculum. Especially, this study proposed VR-based programs to help crews receive mentally counseling treatment in a timely manner and to reduce the mental burden on them by preventing sensitive personal information exposure. Through this, it is expected to contribute to the stable development of the logistics industry by establishing a safe seafarers working environment.

• Industry Promotion Research
• /
• v.4 no.2
• /
• pp.1-8
• /
• 2019

This research is a technology for cutting the insulation of the busbar (busbar) installed in the distribution panel or switchboard, the results of the study, first, the cutting unit and frame of the cutting unit including a housing attached to the upper and lower cutters, respectively Busbar coating laser cutting machine is installed on the top, characterized by consisting of a stopper for adjusting the coating cutting distance of the busbar. Second, the frame is installed with the guide bar in the longitudinal direction at the top so as to be located at the rear side end of the table, the post is installed vertically at the front and rear at the upper middle part, respectively, and cut to the table at the outer side of the front post. It is characterized by the formation of holes. Third, the supporter is fixedly installed on the upper part of the guide bar arranged in the frame, and is characterized by consisting of a cylinder and a support plate. The meaning of this study is to prevent the safety accidents of workers, to improve the efficiency of cutting work, and to prevent the occurrence of scratches on the surface of the busbar.