• Journal of the Korean Society of Safety
• /
• v.33 no.1
• /
• pp.135-141
• /
• 2018

Rotary that causes traffic delays and safety issues by high-speed entry vehicles is currently being improved to roundabout. The operational difference between rotary and roundabout can cause driver's confusion and traffic accident. The purpose of this study is to develop the accident rate models which explain the factors related to the accidents by land use and intersection type. The main results are as follows. First, the null hypotheses that the type of land use and two intersections do not affect the accident rate are rejected. Second, the conflicting factors such as the number of crosswalk and bicycle lane should be carefully considered to reduce traffic accident at rotary. In the case of roundabout, greater than 3.5 m in circulatory lane width and two circulatory lane are analyzed to be important to prevent the accidents. Finally, the commercial and mixed areas are evaluated to be weak to traffic accidents than residential area.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.1
• /
• pp.91-98
• /
• 2011

We develop a model to predict traffic accidents in Korea. In contrast to the classical approach that mainly uses regression analysis, Bayesian approach is adopted. A dependent model that incorporates the data from different kinds of accidents is introduced. The rate of severe accident can be updated even with no data of the same kind. The data of minor accident that can be obtained frequently is efficiently used to predict the severe accident.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.45-46
• /
• 2019

Accident rate in domestic construction industry has been increased rapidly in every year. In particular, the rate of death has been shown very high compared with other industries. It means that safety activities performed by government is not effective in reducing the rate of accident. To solve these problems, the risk factors should be predicted in advance, controlled, monitored and managed from start of project to end of project. However, most studies have been conducted by using frequency of occurrence of accident and only listed the importance of risk. Therefore, the objective of this study is to provide basic material to develop risk quantifying model for human accidents on construction site in South Korea. In the future, it is expected to be used as a reference of study on developing safety mangement checklist in construction industry and model for forecasting accident.

• Journal of Korean Society of Transportation
• /
• v.27 no.3
• /
• pp.141-148
• /
• 2009

An inappropriate evaluation of capacity leads to the incorrect and impractical result due to the transfer of error to the analysis and the evaluation on highway system. The traffic accident which reduces the capacity of road temporarily generates unpredictable congestion, causing difficulties in congestion management. Therefore, this research aims on the measurement of the capacity of the road in accordance to the speed at the accident which is a basic factor when performing analysis. Based on the given approach, the behavior of a vehicle in highway is understood to develop model of critical gap and model of maximum flow rate with respect to the speed of traffic flow. With the established model, the reduction rate of the capacity in highway system at the accident is measured. The result shows that the capacity is reduced by 37% when the speed of the traffic flow is 40km/h. Although the developed model can't be verified clearly, this research has shown that the reduction rate of the capacity in road system has a close relation to the speed.

• Journal of the Korea Safety Management & Science
• /
• v.24 no.4
• /
• pp.41-47
• /
• 2022

A reliable prediction model of national occupational accident fatality rate can be used to evaluate level of safety and health protection for workers in a country. Moreover, the socio-economic aspects of occupational accidents can be identified through interpretation of a well-organized prediction model. In this paper, we propose a machine learning based relative comparison methods to predict and interpret a national occupational accident fatality rate based on socio-economic indicators. First, we collected 29 years of the relevant data from 11 developed countries. Second, we applied 4 types of machine learning regression models and evaluate their performance. Third, we interpret the contribution of each input variable using Shapley Additive Explanations(SHAP). As a result, Gradient Boosting Regressor showed the best predictive performance. We found that different patterns exist across countries in accordance with different socio-economic variables and occupational accident fatality rate.

• Journal of Korean Society of Transportation
• /
• v.29 no.4
• /
• pp.103-111
• /
• 2011

The speed is one of the significant factors affecting accident occurrence. In particular, freeway accidents are highly associated with the speed because vehicles travel on the freeway at higher speed leading to greater potential of severer injury. Efforts attempting to relating speed with accident occurrence have not been significantly made in Korea. The objective of this study is to model the relationship between speed and accident rate on freeways. Loop detector data and accident data obtained from a stretch of Kyungboo freeway during the recent five years, 2005-2009, were used to establish the model. Multiple linear regression analyses showed that median, minimum and standard deviation of speed were contributing variables in the model. The statistical significance identified by the analyses supports the feasibility of the model in evaluating various transportation policies and operations strategies in terms of traffic safety.

• Proceedings of the KOR-KST Conference
• /
• 1997.12a
• /
• pp.33-69
• /
• 1997

This study was conducted to develop a methodology to predict utility pole accident rates and to evaluate cost-effectiveness for safety improvement for utility pole accidents. The utility pole accident rate prediction model was based on the encroachment rate approach introduced in the Transportation Research Board Special Report 214. The utility pole accident rate on a section of highway depends on the roadside encroachment rate and the lateral extent of encroachment. The encroachment rate is influenced by the horizontal and vertical alignment of the highway as well as traffic volume and mean speed. The lateral extent of encroachment is affected by the horizontal and vertical alignment, the mean speed and the roadside slope. An analytical method to generate the probability distribution function for the lateral extent of encroachment was developed for six kinds of encroachment types by the horizontal alignment and encroachment direction. The encroachment rate was calibrated with the information on highway and roadside conditions and the utility pole accident records collected on the sections of 55mph speed limit of the State Trunk Highway 12 in Wisconsin. The encroachment rate on a tangent segment was calibrated as a function of traffic volume with the actual average utility pole accident rates by traffic volume strategies. The adjustment factors for horizontal and vertical alignment were then derived by comparing the actual average utility pole accident rates to the estimations from the model calibrated for tangent and level sections. A computerized benefit-cost analysis procedure was then developed as a means of evaluating alternative countermeasures. The program calculates the benefit-cost ratio and the percent of reduction of utility pole accidents resulting from the implementation of a safety improvement. This program can be used to develop safety improvement: alternatives for utility pole accidents when a predetermined performance level is specified.

• Proceedings of the KOR-KST Conference
• /
• 1997.12b
• /
• pp.35-72
• /
• 1997

This study was conducted to develop a methodology to predict utility pole accident rates and to evaluate cost-effectiveness for safety improvement for utility pole accidents. The utility pole accident rate prediction model was based on the encroachment rate approach introduced in the Transportation Research Board special Report 214. The utility pole accident rate on a section of highway depends on the roadside encroachment rate and the lateral extent of encroachment. The encroachment rate is influenced by the horizontal and vertical alignment of the highway as well as traffic volume and mean speed. The lateral extent of encroachment is affected by the horizontal and vertical alignment, the mean speed and the roadside slope. An analytical method to generate the probability distribution function for the lateral extent of encroachment was developed for six kinds of encroachment types by the horizontal alignment and encroachment direction. The encroachment rate was calibrated with the information on highway and roadside conditions and the utility pole accident records collected on the sections of 55mph speed limit of the State Trunk Highway 12 in Wisconsin. The encroachment rate on tangent segment was calibrated as a function of traffic volume with the actual average utility pole accident rates by traffic volume strategies. The adjustment factors for horizontal and vertical alignment were when derived by comparing the actual average utility pole accident rates to the estimations from the model calibrated for tangent and level sections. A computerized benefit-cost analysis procedure was then developed as a means of evaluating alternative countermeasures. The program calculates the benefit-cost ratio and the percent of reduction of utility pole accidents resulting from the implementation of a safety improvement. This program can be used to develop safety improvement alternatives for utility pole accidents when a predetermined performance level is specified.

• Journal of Korean Society of Transportation
• /
• v.18 no.5
• /
• pp.7-16
• /
• 2000

This paper is focused on verifying time-space repetition of the highway accident and finding the their causes and deterrents. We classify all months into several seasonal groups, develop the model for each seasonal group and analyze the results of these models for Joong-bu highway. The existence of seasonal effect is verified by the analysis or self-organizing map and the accident indices. Agglomerative hierarchical cluster analysis which is used to decide the seasonal groups in accordance with accident patterns, winter group, spring-fall group. and summer group. The accident features of winter group are that the accident rate is high but the severity rate is low. while those of summer group are that the accident rate is low but the severity rate is high. Also, the regression model which is developed to identify the accident Pattern or each seasonal group represents that the season-related factors, such as the amount of rainfall, the amount of snowfall, days of rainfall, days of snowfall etc. are strongly related to the accident pattern of evert seasonal group and among these factors the traffic volume, amount of rainfall. the amount of snowfall and days of freezing importantly affect the local accident Pattern. So, seasonal effect should be considered to the identification of high-risk road section. the development of descriptive and Predictive accident model, the resource allocation model of accident in order to make safety management plan efficient.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.9 s.351
• /
• pp.25-31
• /
• 2006

In this paper, a fatality model of car accident using data mining is proposed with the goal of reducing fatality of traffic accident. The analysis results with a proposed fatality model are utilized to improve a technology and environment for driving. For this, traffic accident data are collected, a data mining algorithm is applied to this data, and then, a fatality model of car accident is developed based on the analysis. The training data as well as test data are utilized to develop the fatality model. The important factors to cause fatality in traffic accidents can be investigated using the model. If these factors are taken into account in traffic policies and driving environment, it is expected that the fatality rate of traffic accident can be reduced hereafter.