• Restorative Dentistry and Endodontics
• /
• v.24 no.1
• /
• pp.166-179
• /
• 1999

Apical sealing is essential for the success of surgical endodontic treatment. Root-end cavity is apt to be contaminated with moisture or blood, and is not always easy to be dried completely. The purpose of this study was to evaluate the influence of dry methods of retrocavity on the apical seal in endodontic surgery. Apical seal was investigated through the evaluation of apical leakage and adaptation of filling material over the cavity wall. To investigate the influence of various dry methods on the apical leakage, 125 palatal roots of extracted human maxillary molar teeth were used. The clinical crown of each tooth was removed at 10 mm from the root apex using a slow-speed diamond saw and water spray. Root canals of the all the specimens were prepared with step-back technique and filled with gutta-percha by lateral condensation method. After removing of the coronal 2 mm of filling material, the access cavities were closed with Cavit$^{(R)}$. Two coats of nail polish were applied to the external surface of each root. Apical three millimeters of each root was resected perpendicular to the long axis of the root with a diamond saw. Class I retrograde cavities were prepared with ultrasonic instruments. Retrocavities were washed with physiologic saline solution and dried with various methods or contaminated with human blood. Retrocavities were filled either with IRM, Super EBA or composite resin. All the specimens were immersed in 2% methylene blue solution for 7 days in an incubator at $37^{\circ}C$. The teeth were dissolved in 14 ml of 35% nitric acid solution and the dye present within the root canal system was returned to solution. The leakage of dye was quantitatively measured via spectrophotometric method. The obtained data were analysed statistically using one-way ANOVA and Duncan's Multiple Range Test. To evaluate the influence of various dry methods on the adaptation of filling material over the cavity wall, 12 palatal roots of extracted human maxillary molar teeth were used. After all the roots were prepared and filled, and retrograde cavities were made and filled as above, roots were sectioned longitudinally. Filling-dentin interface of cut surfaces were examined by scanning electron microscope. The results were as follows: 1. Cavities dried with paper point or compressed air showed less leakage than those dried with cotton pellet in Super EBA filled cavity (p<0.05). However, there was no difference between paper point- and compressed air-dried cavities. 2. When cavities were dried with compressed air, dentin-bonded composite resin-filled cavities showed less apical leakage than IRM- or Super EBA-filled ones (p<0.05). 3. Regardless of the filling material, cavities contaminated with human blood showed significantly more apical leakage than those dried with compressed air after saline irrigation (p<0.05). 4. Outer half of the cavity showed larger dentin-filling interface gap than inner half did when cavities were filled with IRM or Super EBA. 5. In all the filling material groups, cavities contaminated with blood or dried with cotton pellets only showed larger defects at the base of the cavity than ones dried with paper points or compressed air.

• Journal of Intelligence and Information Systems
• /
• v.20 no.4
• /
• pp.89-105
• /
• 2014

After emergence of Internet, social media with highly interactive Web 2.0 applications has provided very user friendly means for consumers and companies to communicate with each other. Users have routinely published contents involving their opinions and interests in social media such as blogs, forums, chatting rooms, and discussion boards, and the contents are released real-time in the Internet. For that reason, many researchers and marketers regard social media contents as the source of information for business analytics to develop business insights, and many studies have reported results on mining business intelligence from Social media content. In particular, opinion mining and sentiment analysis, as a technique to extract, classify, understand, and assess the opinions implicit in text contents, are frequently applied into social media content analysis because it emphasizes determining sentiment polarity and extracting authors' opinions. A number of frameworks, methods, techniques and tools have been presented by these researchers. However, we have found some weaknesses from their methods which are often technically complicated and are not sufficiently user-friendly for helping business decisions and planning. In this study, we attempted to formulate a more comprehensive and practical approach to conduct opinion mining with visual deliverables. First, we described the entire cycle of practical opinion mining using Social media content from the initial data gathering stage to the final presentation session. Our proposed approach to opinion mining consists of four phases: collecting, qualifying, analyzing, and visualizing. In the first phase, analysts have to choose target social media. Each target media requires different ways for analysts to gain access. There are open-API, searching tools, DB2DB interface, purchasing contents, and so son. Second phase is pre-processing to generate useful materials for meaningful analysis. If we do not remove garbage data, results of social media analysis will not provide meaningful and useful business insights. To clean social media data, natural language processing techniques should be applied. The next step is the opinion mining phase where the cleansed social media content set is to be analyzed. The qualified data set includes not only user-generated contents but also content identification information such as creation date, author name, user id, content id, hit counts, review or reply, favorite, etc. Depending on the purpose of the analysis, researchers or data analysts can select a suitable mining tool. Topic extraction and buzz analysis are usually related to market trends analysis, while sentiment analysis is utilized to conduct reputation analysis. There are also various applications, such as stock prediction, product recommendation, sales forecasting, and so on. The last phase is visualization and presentation of analysis results. The major focus and purpose of this phase are to explain results of analysis and help users to comprehend its meaning. Therefore, to the extent possible, deliverables from this phase should be made simple, clear and easy to understand, rather than complex and flashy. To illustrate our approach, we conducted a case study on a leading Korean instant noodle company. We targeted the leading company, NS Food, with 66.5% of market share; the firm has kept No. 1 position in the Korean "Ramen" business for several decades. We collected a total of 11,869 pieces of contents including blogs, forum contents and news articles. After collecting social media content data, we generated instant noodle business specific language resources for data manipulation and analysis using natural language processing. In addition, we tried to classify contents in more detail categories such as marketing features, environment, reputation, etc. In those phase, we used free ware software programs such as TM, KoNLP, ggplot2 and plyr packages in R project. As the result, we presented several useful visualization outputs like domain specific lexicons, volume and sentiment graphs, topic word cloud, heat maps, valence tree map, and other visualized images to provide vivid, full-colored examples using open library software packages of the R project. Business actors can quickly detect areas by a swift glance that are weak, strong, positive, negative, quiet or loud. Heat map is able to explain movement of sentiment or volume in categories and time matrix which shows density of color on time periods. Valence tree map, one of the most comprehensive and holistic visualization models, should be very helpful for analysts and decision makers to quickly understand the "big picture" business situation with a hierarchical structure since tree-map can present buzz volume and sentiment with a visualized result in a certain period. This case study offers real-world business insights from market sensing which would demonstrate to practical-minded business users how they can use these types of results for timely decision making in response to on-going changes in the market. We believe our approach can provide practical and reliable guide to opinion mining with visualized results that are immediately useful, not just in food industry but in other industries as well.

• Journal of Intelligence and Information Systems
• /
• v.26 no.1
• /
• pp.47-73
• /
• 2020

KTX rolling stocks are a system consisting of several machines, electrical devices, and components. The maintenance of the rolling stocks requires considerable expertise and experience of maintenance workers. In the event of a rolling stock failure, the knowledge and experience of the maintainer will result in a difference in the quality of the time and work to solve the problem. So, the resulting availability of the vehicle will vary. Although problem solving is generally based on fault manuals, experienced and skilled professionals can quickly diagnose and take actions by applying personal know-how. Since this knowledge exists in a tacit form, it is difficult to pass it on completely to a successor, and there have been studies that have developed a case-based rolling stock expert system to turn it into a data-driven one. Nonetheless, research on the most commonly used KTX rolling stock on the main-line or the development of a system that extracts text meanings and searches for similar cases is still lacking. Therefore, this study proposes an intelligence supporting system that provides an action guide for emerging failures by using the know-how of these rolling stocks maintenance experts as an example of problem solving. For this purpose, the case base was constructed by collecting the rolling stocks failure data generated from 2015 to 2017, and the integrated dictionary was constructed separately through the case base to include the essential terminology and failure codes in consideration of the specialty of the railway rolling stock sector. Based on a deployed case base, a new failure was retrieved from past cases and the top three most similar failure cases were extracted to propose the actual actions of these cases as a diagnostic guide. In this study, various dimensionality reduction measures were applied to calculate similarity by taking into account the meaningful relationship of failure details in order to compensate for the limitations of the method of searching cases by keyword matching in rolling stock failure expert system studies using case-based reasoning in the precedent case-based expert system studies, and their usefulness was verified through experiments. Among the various dimensionality reduction techniques, similar cases were retrieved by applying three algorithms: Non-negative Matrix Factorization(NMF), Latent Semantic Analysis(LSA), and Doc2Vec to extract the characteristics of the failure and measure the cosine distance between the vectors. The precision, recall, and F-measure methods were used to assess the performance of the proposed actions. To compare the performance of dimensionality reduction techniques, the analysis of variance confirmed that the performance differences of the five algorithms were statistically significant, with a comparison between the algorithm that randomly extracts failure cases with identical failure codes and the algorithm that applies cosine similarity directly based on words. In addition, optimal techniques were derived for practical application by verifying differences in performance depending on the number of dimensions for dimensionality reduction. The analysis showed that the performance of the cosine similarity was higher than that of the dimension using Non-negative Matrix Factorization(NMF) and Latent Semantic Analysis(LSA) and the performance of algorithm using Doc2Vec was the highest. Furthermore, in terms of dimensionality reduction techniques, the larger the number of dimensions at the appropriate level, the better the performance was found. Through this study, we confirmed the usefulness of effective methods of extracting characteristics of data and converting unstructured data when applying case-based reasoning based on which most of the attributes are texted in the special field of KTX rolling stock. Text mining is a trend where studies are being conducted for use in many areas, but studies using such text data are still lacking in an environment where there are a number of specialized terms and limited access to data, such as the one we want to use in this study. In this regard, it is significant that the study first presented an intelligent diagnostic system that suggested action by searching for a case by applying text mining techniques to extract the characteristics of the failure to complement keyword-based case searches. It is expected that this will provide implications as basic study for developing diagnostic systems that can be used immediately on the site.

• Journal of agricultural medicine and community health
• /
• v.26 no.2
• /
• pp.15-41
• /
• 2001

Since medical clients and the community they live in are expected to be center of future public health and medical care system, new service programs must be developed with patients focused on in line with widening public access of information and social participation. Patients- focused service shall mean the area- oriented provision of public health service. In this study, health officers working at public health centers, public health sub- centers and medical offices in Jeonbuk- do area were taken for population in order to investigate their attitudes toward and knowledge about the service area assigning system under the public health programs. Findings from the survey to 260 health officers, divided by general category, are as follows : Government officers at public health organizations appeared to have high grade of understanding to the service area assigning system and also great appreciation for the necessity of it. Regarding the timing for the system to be introduced, they support the gradual implementation and, as for the type of service to be provided, they preferred home nursing and treatment of chronic diseases. Highly positive responses were centered on the health classes under the health promotion projects, and as far as health projects for the old are concerned, services for home nursing, for the disabled and for home- alone people are favored most. On the other hand, budgeting, manpower and reorganization are rated as prerequisite to establishment of the service area assigning system. From the viewpoint of system side, the improvement of working conditions is rendered as most urgent, while the information system for establishing the service area assigning system is conceived far from satisfactory. Proper assignment of specialists was noted as mostly important to establish the delivery system for medical service through the service area assigning system by team. As merits of the service area assigning system, it is pointed out that, through the system, health clients can better be managed and the nursing quality will be improved thank to the enhanced specialization. It is also perceived that the district health service is not well prepared to respond to the increased and diversified needs of community people and, furthermore, service programs of health centers have not been fully developed. The most serious problem standing in the way to expansion of health projects is, it is noted, uniformity (formality) of the project. Based on the results of the survey which suggest time has ripen to introduce the service area assigning system, following strategies are proposed to anchor down the system as soon as possible: First, we should introduce the system gradually, starting from the area selected, and in consideration of area specialities, refraining from the hitherto stereotyped way of providing health service. Second, we should seek to properly assign the specialists and improve the working conditions of the assigned officers by securing sufficient budget, since it is a most urgent step to lay foundation for the service area assigning system. Third, best service program should be developed to meet the satisfaction of community people by responding to their needs and solidifying the management of medical clients. Fourth, wide scope of study should further be conducted in order to help this system take roots in the central living of community residents since pilot project on the experimental base attended by specialists only can not win popularity among the masses.

• Korean Journal of Environment and Ecology
• /
• v.33 no.6
• /
• pp.664-676
• /
• 2019

This study aimed to analyze the bioacoustics and habitat environment of the cicadas inhabiting Taebaeksan National Park, an sub-alpine region in Korea. The mating calls of the cicadas were recorded for approximately 3 months, between July and September of 2018. The recording devices were installed in Daedeoksan valley and Baekcheon valley, inside Taebaeksan National Park, and the sounds were recorded 24 hours a day. In order to obtain the habitat distribution data of the cicadas, the sounds were recorded from 111 spots located in the Taebaeksan National Park trail in August 2018. The daily weather data was obtained from the Taebaek city weather center. The results of the study demonstrated that 5 species of cicadas inhabit Taebaeksan National Park, namely, Leptosemia takanonis, Lyristes intermedius, Kosemia yezoensis, Hyalessa fuscata, and Meimuna opalifera. The time of appearance for L. takanonis was early July to mid-July, and that for L. intermedius, K. yezoensis, H. fuscata, and M. opalifera was mid-July to early September. Analysis of the circadian rhythm revealed that L. intermedius, K. yezoensis, and H. fuscata started producing mating calls between 6:00 and 7:00, which ended at around 19:00 for all the three species. The peak time for producing mating calls was 11:00 for L. intermedius, 12:00 for H. fuscata, and around 13:00 to 14:00 for K. yezoensis. The environmental factors influencing the mating calls of the cicadas inhabiting Taebaeksan National Park were analyzed by logistic regression. The results showed that the probability of producing mating calls increased by 1.192 and 1.279 times in L. intermedius and K. yezoensis, respectively, when the average temperature increased by one degree. When the duration of sunlight increased by one hour, the probability of producing mating calls increased by 4.366 and 2.624 times in L. intermedius and H. fuscata, respectively. Analysis of the interspecific effects revealed that when H. fuscata produced a single mating call, the probability of producing mating calls increased by 14.620 and 2.784 times in L. intermedius and K. yezoensis, respectively. When K. yezoensis and L. intermedius produced mating calls, the probability of producing mating calls in H. fuscata increased by 11.301 and 2.474 times, respectively. L. intermedius and K. yezoensis did not have any effects on each other with respect to the production of mating calls. Analysis of the habitat environment of each species revealed that their habitats were located at altitudes of 1,046 m (780~1,315 m) for L. intermedius, 1,072 m (762~1,361 m) for K. yezoensis, and 976 m (686~1,245 m) for H. fuscata. Unlike H. fuscata, which was found at a low altitude, K. yezoensis and L. intermedius were not found at altitudes lower than 700 m. Analysis of the average aspect of the habitats of each of the cicada species revealed that L. intermedius was found at 166° (125~207°), K. yezoensis was found at 100° (72~128°), and H. fuscata was found at 173° (118~228°). Examination of the distribution of each of the cicada species revealed that they were predominantly distributed in the ridges and slopes located in the southeastern region of Munsubong in Taebaeksan. In summary, L. intermedius and K. yezoensis was found to inhabit higher altitudes in Taebacksan National Park than H. fuscata, which was found throughout the Korean peninsula. Additionally, the main aspect of the cicada habitat was found to be the southeastern region (100~173°), which has good access to daylight.

• Journal of Intelligence and Information Systems
• /
• v.24 no.2
• /
• pp.171-193
• /
• 2018

LOD(Linked Open Data) cloud is a practical implementation of semantic web. We suggested a new method that provides identity links conveniently in LOD cloud. It also allows changes in LOD to be reflected to searching results without any omissions. LOD provides detail descriptions of entities to public in RDF triple form. RDF triple is composed of subject, predicates, and objects and presents detail description for an entity. Links in LOD cloud, named identity links, are realized by asserting entities of different RDF triples to be identical. Currently, the identity link is provided with creating a link triple explicitly in which associates its subject and object with source and target entities. Link triples are appended to LOD. With identity links, a knowledge achieves from an LOD can be expanded with different knowledge from different LODs. The goal of LOD cloud is providing opportunity of knowledge expansion to users. Appending link triples to LOD, however, has serious difficulties in discovering identity links between entities one by one notwithstanding the enormous scale of LOD. Newly added entities cannot be reflected to searching results until identity links heading for them are serialized and published to LOD cloud. Instead of creating enormous identity links, we propose LOD to prepare its own link policy. The link policy specifies a set of target LODs to link and constraints necessary to discover identity links to entities on target LODs. On searching, it becomes possible to access newly added entities and reflect them to searching results without any omissions by referencing the link policies. Link policy specifies a set of predicate pairs for discovering identity between associated entities in source and target LODs. For the link policy specification, we have suggested a set of vocabularies that conform to RDFS and OWL. Identity between entities is evaluated in accordance with a similarity of the source and the target entities' objects which have been associated with the predicates' pair in the link policy. We implemented a system "Change Acceptable In-Depth Searching System(CAIDS)". With CAIDS, user's searching request starts from depth_0 LOD, i.e. surface searching. Referencing the link policies of LODs, CAIDS proceeds in-depth searching, next LODs of next depths. To supplement identity links derived from the link policies, CAIDS uses explicit link triples as well. Following the identity links, CAIDS's in-depth searching progresses. Content of an entity obtained from depth_0 LOD expands with the contents of entities of other LODs which have been discovered to be identical to depth_0 LOD entity. Expanding content of depth_0 LOD entity without user's cognition of such other LODs is the implementation of knowledge expansion. It is the goal of LOD cloud. The more identity links in LOD cloud, the wider content expansions in LOD cloud. We have suggested a new way to create identity links abundantly and supply them to LOD cloud. Experiments on CAIDS performed against DBpedia LODs of Korea, France, Italy, Spain, and Portugal. They present that CAIDS provides appropriate expansion ratio and inclusion ratio as long as degree of similarity between source and target objects is 0.8 ~ 0.9. Expansion ratio, for each depth, depicts the ratio of the entities discovered at the depth to the entities of depth_0 LOD. For each depth, inclusion ratio illustrates the ratio of the entities discovered only with explicit links to the entities discovered only with link policies. In cases of similarity degrees with under 0.8, expansion becomes excessive and thus contents become distorted. Similarity degree of 0.8 ~ 0.9 provides appropriate amount of RDF triples searched as well. Experiments have evaluated confidence degree of contents which have been expanded in accordance with in-depth searching. Confidence degree of content is directly coupled with identity ratio of an entity, which means the degree of identity to the entity of depth_0 LOD. Identity ratio of an entity is obtained by multiplying source LOD's confidence and source entity's identity ratio. By tracing the identity links in advance, LOD's confidence is evaluated in accordance with the amount of identity links incoming to the entities in the LOD. While evaluating the identity ratio, concept of identity agreement, which means that multiple identity links head to a common entity, has been considered. With the identity agreement concept, experimental results present that identity ratio decreases as depth deepens, but rebounds as the depth deepens more. For each entity, as the number of identity links increases, identity ratio rebounds early and reaches at 1 finally. We found out that more than 8 identity links for each entity would lead users to give their confidence to the contents expanded. Link policy based in-depth searching method, we proposed, is expected to contribute to abundant identity links provisions to LOD cloud.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.6
• /
• pp.1-11
• /
• 2011

The research was aimed to verify the feasibility of the model of Park-Based Mixed-Use Districts(PBMUD) around urban large park to secure private-based urban parks through the revision of the urban zoning system. The PBMUD is a type of urban zoning district in which park-oriented land use is mixed with the urban land uses of residents, advertising, business, culture, education and research. The PBMUD, delineated from and based on a new paradigm of landscape urbanism, is a new urban strategy to secure urban parks and to cultivate urban regeneration around parks and green spaces to enhance the quality of the urban landscape and to ameliorate urban environmental disasters like climate change. This study performed a questionnaire survey and analysis after a review of literature related to PBMUD. The study looked for specialists in the fields of urban planning and landscape architecture such as officials, researchers and engineers to respond to the questionnaire, which asked about degree of preference. The conclusions of this study were as follows. Firstly, specialists prefer the PBMUD at 79.3% for to 20.7% against ratio, indicating the feasibility of the model of PBMUD. The second, the most preferable reasons for the model, were the possibility of securing park space around urban parks and green spaces that assures access to park and communication with each area. The third, the main reason for non-preference for the model, was a lack of understanding of PBMUD added to the problems of unprofitable laws and regulations related to urban planning and development. These proposed a revision of the related laws and regulations such as the laws for planning and use of national land, laws for architecture etc. The fourth, the most preferred type of PBMUD, was cultural use mixed with park use in every kind of mix of land use. The degree of preference was lower in the order of use of commercial, residential, business, and education(research) when mixed with park use. The number of mixed-use amenities with in the park was found to be an indicator determining preference. The greater the number, the lower was preference frequencies, especially when related to research and business use. The fifth, the preference frequencies of the more than 70% among the respondents to the mixed-use ratio between park use and the others, was in a ratio of 60% park use and 40% other urban use. These research results will help to launch new future research subjects on the revision of zoning regulations in the laws for the planning and uses of national land and architectural law as well as criteria and indicators of subdivision planning as related to a PBMUD model.

• Journal of the Korean Geographical Society
• /
• v.29 no.1
• /
• pp.84-104
• /
• 1994

The migration of population into the city has been on the increase according as Korea has been industrialized repidly since the 1960's. And there is a steady decrease in rural population. Thus lack of the number of the students forced many elementary Schools to be abolished. The aim of this study is to grasp the abolition types and the regional characteristics with the subject region of Chungbuk province. From the viewpoint of the increasing abolition of the elementary schools, I think it is very important to understand how the elementary schools have been abolished so far and predict how the subject region will have been changed in geography. Data for this study are based on Annual Establishment-Abolition Situation of the Schools published by Chungbuk office of Education in 1992, and many Kinds of the statistical reports, and the interview with the related. The results are as follows: 1. By examining the change of the number of the elementary schools and students in Chnugbuk, the numder of the students had also decreased since 1969 and was less than the half in 1990. As the number of the schools began to decrease ten years later than the students began to, the abolition of the elementary schools has started in reality from 1980's. 2. The 72 elementary schools were aboilshed between 1980 and 1992: the principal school is 9.7%, the branch school is 90.3%. The most fifteen schools are abolished in Yongdong-county and Chechon-county, and the least one school is abolished in Chechon-city and Okchon-county, and there is no abolition in Chongju-city and Chungju-city: According to the type of the abolition process, the least seven principal schools are abolished, and the principal school is reorganized as a branch school and twenty eight branch schools are abolished, and the most thirty seven branch schools are abolished. 3. When special change of the abolition is classified into the first perio (1980-1986) and the second period (1987-1992), in the first period the principal and branch schools were abolished and they are 13.9% of total abolition. The abolition out of them by building a dam is 60%. The principal schools in the submerged area though they have many students, were abolished. In the second period sixty two branch schools are abolished and they are 86.1% of total abolition. The most fifteen schools are abolished in Yongdong-county, thirteen in Chechon-county, seven in Tanyang-county, six in Chongwon-county, five in Chungwon-county and Koesan-county. Unlike the first period, the schools were abolished in this period because the number of students was so small. In this period sixty branch schools were abolished. All the students in the abolished schools except six schools transfered to the principal schools. The 58 school authorities help the students attend school by bus or support the expenses for attending school after that. 4. The abolition types of city, county and myon are classified into five types by the number of the abolished schools. The most forty nine abolished schools in type II are 68.1 of the total abolition. The least three abolished ones in type I are 12.5%. Considering the relation between the abolition type ane the number of schools and students, the number of the schools, increased in type I, II, III, V except IV from 1980 and then have decreased by abolition since 1980, while the more students decreased than they did in 1970 and the more the abolished school increases, the less the students decreases. The average students per school decreased in every abolition type and the most students decreased in type IV. 5. Considering the relation between the abolition type and the regional characteristics, most abolished schools were located between 100m and 300m above the sea level and it is 71% of the total abolition. The region without the abolition is high in the ratio of the cultivate land, ratio of rice field, and the part-time farmer, but the region with many abolition is low in the ratio of cultivated land. As for the manufacturing there are the most city, county and myon in the abolition type in Youngdong-county and Chechon-county where the manufacturing ratio of employing is low but Chongju-city without the abolition is a region where the manufacturing ratio is high. Consequently the development of the manufacturing causes the population to emigation out and the decrease of the population leads the transport is difficult of access, the facilities sold after being abolished are not being used in many ways. 7. Take an example of Youndong-county where the most schools were abolished, I have examined the school district and the population characteristics of the abolition. Though there were more villages, households, populations in the region that is higher than low above the sea level, the schools were abolished. Therefore we know that above the sea level had a great effect on the abolition. As a result of the regional analysis of the abolition, many schools were abolished by the artificial buildings such as a dam in the early 1980's but the schools in the late 1980's were abolished ten years later after the students decreased. More schools were abolished in the region where the manufacturing industry didn't develop. And the higher the school position was above the sea level, the sooner the school was abolished. It is also proved that both the beautiful natural scenery and accessibility are the important factor in using the abolished facilities practically.

• Asia pacific journal of information systems
• /
• v.22 no.4
• /
• pp.101-123
• /
• 2012

Currently, Social Media, it has widely a renown keyword and its related social trends and businesses have been fastly applied into various contexts. Social media has become an important research area for scholars interested in online technologies and cyber space and their social impacts. Social media is not only including web-based services but also mobile-based application services that allow people to share various style information and knowledge through online connection. Social media users have tendency to common identity- and bond-attachment through interactions such as 'thumbs up', 'reply note', 'forwarding', which may have driven from various factors and may result in delivering information, sharing knowledge, and specific experiences et al. Even further, almost of all social media sites provide and connect unknown strangers depending on shared interests, political views, or enjoyable activities, and other stuffs incorporating the creation of contents, which provides benefits to users. As fast developing digital devices including smartphone, tablet PC, internet based blogging, and photo and video clips, scholars desperately have began to study regarding diverse issues connecting human beings' motivations and the behavioral results which may be articulated by the format of antecedents as well as consequences related to contents that people create via social media. Social media such as Facebook, Twitter, or Cyworld users are more and more getting close each other and build up their relationships by a different style. In this sense, people use social media as tools for maintain pre-existing network, creating new people socially, and at the same time, explicitly find some business opportunities using personal and unlimited public networks. In terms of theory in explaining this phenomenon, social capital is a concept that describes the benefits one receives from one's relationship with others. Thereby, social media use is closely related to the form and connected of people, which is a bridge that can be able to achieve informational benefits of a heterogeneous network of people and common identity- and bonding-attachment which emphasizes emotional benefits from community members or friend group. Social capital would be resources accumulated through the relationships among people, which can be considered as an investment in social relations with expected returns and may achieve benefits from the greater access to and use of resources embedded in social networks. Social media using for their social capital has vastly been adopted in a cyber world, however, there has been little explaining the phenomenon theoretically how people may take advantages or opportunities through interaction among people, why people may interactively give willingness to help or their answers. The individual consciously express themselves in an online space, so called, common identity- or bonding-attachments. Common-identity attachment is the focus of the weak ties, which are loose connections between individuals who may provide useful information or new perspectives for one another but typically not emotional support, whereas common-bonding attachment is explained that between individuals in tightly-knit, emotionally close relationship such as family and close friends. The common identify- and bonding-attachment are mainly studying on-offline setting, which individual convey an impression to others that are expressed to own interest to others. Thus, individuals expect to meet other people and are trying to behave self-presentation engaging in opposite partners accordingly. As developing social media, individuals are motivated to disclose self-disclosures of open and honest using diverse cues such as verbal and nonverbal and pictorial and video files to their friends as well as passing strangers. Social media context, common identity- and bond-attachment for self-presentation seems different compared with face-to-face context. In the realm of social media, social users look for self-impression by posting text messages, pictures, video files. Under the digital environments, people interact to work, shop, learn, entertain, and be played. Social media provides increasingly the kinds of intention and behavior in online. Typically, identity and bond social capital through self-presentation is the intentional and tangible component of identity. At social media, people try to engage in others via a desired impression, which can maintain through performing coherent and complementary communications including displaying signs, symbols, brands made of digital stuffs(information, interest, pictures, etc,). In marketing area, consumers traditionally show common-identity as they select clothes, hairstyles, automobiles, logos, and so on, to impress others in any given context in a shopping mall or opera. To examine these social capital and attachment, we combined a social capital theory with an attachment theory into our research model. Our research model focuses on the common identity- and bond-attachment how they are formulated through social capitals: cognitive capital, structural capital, relational capital, and individual characteristics. Thus, we examined that individual online kindness, self-rated expertise, and social relation influence to build common identity- and bond-attachment, and the attachment effects make an impact on both the willingness to help, however, common bond seems not to show directly impact on information sharing. As a result, we discover that the social capital and attachment theories are mainly applicable to the context of social media and usage in the individual networks. We collected sample data of 256 who are using social media such as Facebook, Twitter, and Cyworld and analyzed the suggested hypotheses through the Structural Equation Model by AMOS. This study analyzes the direct and indirect relationship between the social network service usage and outcomes. Antecedents of kindness, confidence of knowledge, social relations are significantly affected to the mediators common identity-and bond attachments, however, interestingly, network externality does not impact, which we assumed that a size of network was a negative because group members would not significantly contribute if the members do not intend to actively interact with each other. The mediating variables had a positive effect on toward willingness to help. Further, common identity attachment has stronger significant on shared information.

• Asia pacific journal of information systems
• /
• v.23 no.3
• /
• pp.25-53
• /
• 2013

This study analyzes the effect of Computer Aided Innovation (CAI) to improve R&D Capabilities empirically. Survey was distributed by e-mail and Google Docs, targeting CTO of 235 SMEs. 142 surveys were returned back (rate of return 60.4%) from companies. Survey results from 119 companies (83.8%) which are effective samples except no-response, insincere response, estimated value, etc. were used for statistics analysis. Companies with less than 50billion KRW sales of entire researched companies occupy 76.5% in terms of sample traits. Companies with less than 300 employees occupy 83.2%. In terms of the type of company business Partners (called 'partners with big companies' hereunder) who work with big companies for business occupy 68.1%. SMEs based on their own business (called 'independent small companies') appear to occupy 31.9%. The present status of holding IT system according to traits of company business was classified into partners with big companies versus independent SMEs. The present status of ERP is 18.5% to 34.5%. QMS is 11.8% to 9.2%. And PLM (Product Life-cycle Management) is 6.7% to 2.5%. The holding of 3D CAD is 47.1% to 21%. IT system-holding and its application of independent SMEs seemed very vulnerable, compared with partner companies of big companies. This study is comprised of IT infra and IT Utilization as CAI capacity factors which are independent variables. factors of R&D capabilities which are independent variables are organization capability, process capability, HR capability, technology-accumulating capability, and internal/external collaboration capability. The highest average value of variables was 4.24 in organization capability 2. The lowest average value was 3.01 in IT infra which makes users access to data and information in other areas and use them with ease when required during new product development. It seems that the inferior environment of IT infra of general SMEs is reflected in CAI itself. In order to review the validity used to measure variables, Factors have been analyzed. 7 factors which have over 1.0 pure value of their dependent and independent variables were extracted. These factors appear to explain 71.167% in total of total variances. From the result of factor analysis about measurable variables in this study, reliability of each item was checked by Cronbach's Alpha coefficient. All measurable factors at least over 0.611 seemed to acquire reliability. Next, correlation has been done to explain certain phenomenon by correlation analysis between variables. As R&D capabilities factors which are arranged as dependent variables, organization capability, process capability, HR capability, technology-accumulating capability, and internal/external collaboration capability turned out that they acquire significant correlation at 99% reliability level in all variables of IT infra and IT Utilization which are independent variables. In addition, correlation coefficient between each factor is less than 0.8, which proves that the validity of this study judgement has been acquired. The pair with the highest coefficient had 0.628 for IT utilization and technology-accumulating capability. Regression model which can estimate independent variables was used in this study under the hypothesis that there is linear relation between independent variables and dependent variables so as to identify CAI capability's impact factors on R&D. The total explanations of IT infra among CAI capability for independent variables such as organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability are 10.3%, 7%, 11.9%, 30.9%, and 10.5% respectively. IT Utilization exposes comprehensively low explanatory capability with 12.4%, 5.9%, 11.1%, 38.9%, and 13.4% for organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability respectively. However, both factors of independent variables expose very high explanatory capability relatively for technology-accumulating capability among independent variable. Regression formula which is comprised of independent variables and dependent variables are all significant (P<0.005). The suitability of regression model seems high. When the results of test for dependent variables and independent variables are estimated, the hypothesis of 10 different factors appeared all significant in regression analysis model coefficient (P<0.01) which is estimated to affect in the hypothesis. As a result of liner regression analysis between two independent variables drawn by influence factor analysis for R&D capability and R&D capability. IT infra and IT Utilization which are CAI capability factors has positive correlation to organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability with inside and outside which are dependent variables, R&D capability factors. It was identified as a significant factor which affects R&D capability. However, considering adjustable variables, a big gap is found, compared to entire company. First of all, in case of partner companies with big companies, in IT infra as CAI capability, organization capability, process capability, human resources capability, and technology capability out of R&D capacities seems to have positive correlation. However, collaboration capability appeared insignificance. IT utilization which is a CAI capability factor seemed to have positive relation to organization capability, process capability, human resources capability, and internal/external collaboration capability just as those of entire companies. Next, by analyzing independent types of SMEs as an adjustable variable, very different results were found from those of entire companies or partner companies with big companies. First of all, all factors in IT infra except technology-accumulating capability were rejected. IT utilization was rejected except technology-accumulating capability and collaboration capability. Comprehending the above adjustable variables, the following results were drawn in this study. First, in case of big companies or partner companies with big companies, IT infra and IT utilization affect improving R&D Capabilities positively. It was because most of big companies encourage innovation by using IT utilization and IT infra building over certain level to their partner companies. Second, in all companies, IT infra and IT utilization as CAI capability affect improving technology-accumulating capability positively at least as R&D capability factor. The most of factor explanation is low at around 10%. However, technology-accumulating capability is rather high around 25.6% to 38.4%. It was found that CAI capability contributes to technology-accumulating capability highly. Companies shouldn't consider IT infra and IT utilization as a simple product developing tool in R&D section. However, they have to consider to use them as a management innovating strategy tool which proceeds entire-company management innovation centered in new product development. Not only the improvement of technology-accumulating capability in department of R&D. Centered in new product development, it has to be used as original management innovative strategy which proceeds entire company management innovation. It suggests that it can be a method to improve technology-accumulating capability in R&D section and Dynamic capability to acquire sustainable competitive advantage.