• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1859-1861
• /
• 2002

This paper attempts to discuss the pseudo-spark which is developed for high voltage and high current. The pseudo-spark switch is on the basic of the Paschen's law. The pseudo-spark switch fabricates the glass chamber. The pseudo-spark switch consists of hollow cathode, hollow anode, and trigger. The pseudo-spark switch is operated at the voltage of 20 kV and the pressure range of $20{\sim}80$ mtorr with He-gas. The switching current of the pseudo-spark switch was measured as 65 kA, and the duration of the pulse was about 100 ${\mu}s$. This paper describes the results of tests and the characteristics of the switch.

• 대한방사선방어학회:학술대회논문집
• /
• 2010.04a
• /
• pp.94-95
• /
• 2010

The accuracy of typical dosimeters used around high energy accelerator were proved by dose rate measurements. The experimental neutron spectrum were useful for improving high energy Monte Carlo codes by validating the implemented models. In series of this joint research the experimental data will be upgrade successively. This research program is opened to experts and students in Korea, too.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.151.2-151.2
• /
• 2014

Broadband impedances for the 3-GeV pohang light source-II (PLS-II) storage ring have been numerically estimated using a full three dimensional finite-difference time-domain code, CST particle studio. The total broadband impedance of all the vacuum components was estimated as 0.256 ohm, which is a small fraction of the total machine impedance budget.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1823-1826
• /
• 2002

The purpose of this experiment was to develope Triggered Vacuum Switch (TVS) for the high voltage and high current. The TVS has an array of rods of alternate polarity in which a fixed gap spacing is maintained between the rods. The cross section of each rod has trapezoidal shape. It consists of electrode, ceramic chamber, getter and trigger. Currently, triggered vacuum switch (TVS) with seal-off has been designed and fabricated at PAL. An experimentation and trigger devices for TVS were designed for testing characteristics of electricity. For making the prototype of TVS, it is developed of fabrication process and fined of electrode material. The fabrication of the TVS is a lot of process which have manufacturing of part, chemical clean, ceramic brazing and metal welding. The fabricated TVS is tested of leak for vacuum, hold-off voltage and conditioning of trigger system. The TVS has pinch-off after it is removed of gas in the TVS and activated of getter in degassing furnace. The prototype TVS tested about 20 kV, 75 kA, 83 ${\mu}s$ with 100 kJ capacitor bank and inductance 5 ${\mu}H$. This paper describes the results of tests and the characteristics of the switch.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2126-2128
• /
• 2000

A TVS(triggered vacuum switch) use in high-power, high-current, and high-frequency conversion and switching circuits. The TVS has a six-gap trapezoidal rod electrode system. The electrode system consists of three cathode and anode rods which are made with OFHC. The trigger unit of the TVS is located at the cathode base center. To obtain a wide variety of characteristics this paper describes the results of tests.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2008.12a
• /
• pp.226.2-226.2
• /
• 2008

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.6 no.1
• /
• pp.20-26
• /
• 2020

Accelerator mass spectrometry (AMS) is a powerful detection technique with the exquisite sensitivity and high precision compared with other traditional analytical techniques. Accelerator mass spectrometry can be widely applied in the technique of radiocarbon dating in the fields of archeology, geology and oceanography. The ability of accelerator mass spectrometry to measure rare ¹⁴C concentrations in microgram and even sub-microgram amounts suggests that extension of ¹⁴C-accelerator mass spectrometry to biomedical field is a natural and attractive application of the technology. Drug development processes are costly, risky, and time consuming. However, the use of ¹⁴C-accelerator mass spectrometry allows absorption, distribution, metabolism and excretion (ADME) studies easier to understand pharmacokinetics of drug candidates. Over the last few decades, accelerator mass spectrometry and its applications to preclinical/clinical trials have significantly increased. For accelerator mass spectrometry analysis of biological samples, graphitization processes of samples are important. In this paper, we present a detailed sample preparation procedure to apply to graphitization of biological samples for accelerator mass spectrometry.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.05a
• /
• pp.1054-1055
• /
• 2005

• Polymer Science and Technology
• /
• v.21 no.4
• /
• pp.336-344
• /
• 2010

• Proceedings of the Korean Vacuum Society Conference
• /
• 2005.08a
• /
• pp.53-53
• /
• 2005