• 한국압력기기공학회 논문집
• /
• 제6권1호
• /
• pp.50-56
• /
• 2010

Fatigue has been known as a major degradation mechanism of ASME class 1 components in nuclear power plants. Fatigue damage could be accelerated by combined interaction of several loads and environmental factors. However, the environmental effect is not explicitly addressed in the ASME S-N curve which is based on air at room temperature. Therefore many studies have been performed to understand the environmental effects on fatigue behavior of materials used in nuclear power plants. As a part of efforts, we performed low cycle fatigue tests under various environmental conditions and analyzed the environmental effects on the fatigue life of SA508 Gr. 1a low alloy steel by comparing with higuchi's model. Test results show that the fatigue life depends on water temperature, dissolved oxygen and strain rate. But strain rate over 0.4%/s has little effect on the fatigue life. To find the cause of different fatigue life with ANL's and higuchi's model, another test performed with different heat numbered and heat treated materials of SA508 Gr. 1a. On a metallurgical point of view, the material with bainite microstructure shows much longer fatigue life than that with ferrite/pearlite microstructure. And the characteristics of crack propagation as different microstructure seem to be the main cause of different fatigue life.

• 펄프종이기술
• /
• 제47권2호
• /
• pp.70-79
• /
• 2015

This study was carried out to analyze deterioration characteristics of color-pigments painted Hanji to preserve and restore the cultural properties. On the traditional painting technique, glue was used with pigments in various ways for painting, but it eventually caused the deterioration of paintings. Thus, five colors were selected and analyzed for this study for investigating their characteristics of deteriration. Three kinds of glues (Wugyo, Nokgyo, and Togyo) and two kinds of pigments (Chinese and Gilsang) were painted on the Hanji for the accelerated aging test. And then color fastness of pigments and tensile strength of painted Hanji were measured for the estimation of deterioration degree. The results of SEM-EDS showed that Chinese pigments including blue, yellow, green, and red were composed of inorganic substances but the brown was organic substance. Gilsang pigments were composed mainly of Si and Ti ions. Color fastness of the Gilsang pigment blue, yellow, green, and brown were better than those of Chinese. Chinese pigment brown with organic substance showed the worst color fastness. Generally, Chinese pigments painted Hanji showed higher tensile strength than Gilsang in the accelerated aging test. Hanji treated with Chinese pigment and Nokgyo (antler glue) blends and Gilsang pigment and Togyo (rabbit pelt glue) blends showed higher tensile strength than the others. And Andong Hanji showed the highest tensile strength.

• 한국추진공학회지
• /
• 제23권3호
• /
• pp.51-57
• /
• 2019

HTPB 고체 추진제 기계적 물성의 후경화 효과에 대하여 시편 시험을 통하여 평가하였다. 후경화 반응 완료 후 시편 가속노화 시험을 실시하여 Arrhenius 식의 계수를 획득하였다. 확인을 위하여 원통형 모사 충전체를 설계, 제작하여 가속노화 시험을 수행하였으며, 시험 후 추진제 표면 부위, 중앙 부위, 접착 부위에 대하여 시편을 채취하여 노화 물성을 평가하였다. 측정된 결과에 대하여, 획득된 가속노화 식으로 예측하여 비교하였다. 그 결과 JANNAF 시편 시험을 통한 가속노화 식은 추진제 재료의 노화를 잘 예측하였으나 접착 부위에서는 실제 측정 결과와 차이를 나타내었다. 따라서 실기형 추진기관에서 노화 시료를 채취하는 경우 시험 목적에 부합하도록 시편 채취 부위를 선정해야 한다.

• 한국산학기술학회논문지
• /
• 제16권12호
• /
• pp.8637-8642
• /
• 2015

현재 군에 보급되고 있는 접착식 전투화용 고무의 대표적인 노화현상은 열에 의한 정기적인 스트레스 노화가 대표적이다. 본 연구에서는 전투화용 고무의 노화시험을 실시하고, 아레니우스 관계식을 이용하여 노화온도($60^{\circ}C$, $80^{\circ}C$, $100^{\circ}C$)에 따른 반응속도 상수 k를 구하였다. 제품의 수명한계를 인장강도는 30% 감소시점, 신장률은 50% 감소시점, 내마모도는 380%로 가정하였으며, ln($P/P_0$) 및 활성화 에너지와 상수를 고려한 수명예측을 하였다. 이를 통해 노화온도에 영향을 받은 전투화용 고무의 수명을 예측하였고, 그 결과 실온($20^{\circ}C$)에서 예상수명이 10년 이상임을 확인할 수 있었다.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제3C권2호
• /
• pp.35-42
• /
• 2003

This paper proposes a relative lifetime test method of MgO thin film. The suggested test conditions are 5$0^{\circ}C$, 400Torr, 20% over-voltage and 300KHz. The relative lifetime of MgO thin film is significantly affected by the MgO preparing conditions and Xe partial pressure. As result, the lifetime of the AC plasma display panel (PDP) is increased with an MgO thickness of 2000$\AA$ to 8000$\AA$ but is saturated over 5000$\AA$ (up to 9000 $\AA$). In addition, as Xe partial pressure increases, AC PDP lifetime increases.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제5권4호
• /
• pp.487-500
• /
• 2005

MEMS devices usually have micro actuators contained in a cavity, If the pressure level of testing chamber is higher than that of cavity, moisture will ingress into the cavity, which may cause critical failure such as stiction of the moving parts. To design an accelerated life test based on high temperature and high humidity, such a phenomena should be considered. In this study, a throughput model that can estimate the amount of moisture ingress is used to decide the testing time and conditions of a high temperature and high humidify test.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.216-217
• /
• 2007

This paper represents the reliability assessment on the mould type combined transformer used in the distribution system by electrical tests. For the reliability assessment, we had tested lightning impulse test, short-circuit withstand capability test, electrical accelerated life test and so on to the mould type combined transformer of Young-Hwa Industrial Electric Co., Ltd.

• 대한기계학회논문집A
• /
• 제33권8호
• /
• pp.739-744
• /
• 2009

Rail-pad is an important and readily replaceable component of a railway track, as it is the elastic layer between the rail and the sleeper. Characteristics and useful lifetime prediction of rail-pad was very important in design procedure to assure the safety and reliability. In this paper, the degradation of rail pad properties as a function of their in-service life is studied with a view of developing a technique for predicting the optimum period of track maintenance with regard to pad replacement. In order to investigate the useful lifetime, the accelerate test were carried out. Accelerated test results changes as the threshold are used for assessment of the useful life and time to threshold value were plotted against reciprocal of absolute temperature to give the Arrhenius plot. By using the acceleration test, several useful lifetime prediction for rail-pads were proposed.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2006년도 춘계학술발표논문집
• /
• pp.449-452
• /
• 2006

본 논문에서는 전장부품에서 중요한 연결 장치인 커넥터의 고장 모드를 분석하기 위한 방법으로 HALT(Highly Accelerated Life Test)를 이용해 관측된 고장 데이터를 기반으로 ReliaSoft사의 소프트웨어인 ALTA PRO를 이용하여 분석하고자 한다. 커넥터를 이루는 주재료는 플라스틱과 금속으로 구성되어 있어 습도에 대한 반응 보다 열 변화와 진동에 의해 고장이 발생 한다. 이러한 커넥터의 특성을 고려하여 HALT는 온도와 진동 스트레스를 이용한 복합 스트레스 시험을 실시하였다. HALT에 사용된 시료는 20핀 커넥터 5개로 74시간 동안 시험하였으며, 9개의 핀에서 부러지는 고장이 관측 되었다. 관측된 고장 데이터를 단일 스트레스에 의한 고장으로 분석하기위해 시험에 사용된 온도와 진동 스트레스를 개별 스트레스로 하여 ALTA PRO를 이용하여 분석하였다. 분석을 위한 수명-스트레스관계식은 스텝 스트레스에 적합한 Cumulative Damage 선택하였으며 Likelihood Function을 이용 최적 분포는 Weibull 분포임을 확인하였다, ALTA Pro를 이용한 분석 결과 열에 대한 Mean Life는 2444.03 시간이며, 진동에 대한 Mean Life는 1784.27시간으로 진동에 대한 Mean Life가 659.76 시간만큼 작은 것을 확인 하였다. 고장 데이터를 이용한 수명 예측에서 Mean Life가 작다는 것은 스트레스에 의해 고장이 빠르게 발생 했다는 것을 의미한다. 가속수명시험을 통해 관측된 커넥터의 고장은 핀이 부러지는 현상이며, 고장에 대한 주요 원인으로 온도 스트레스 보다 Mean Life가 낮은 진동 스트레스인 것으로 판단된다.

• 기술사
• /
• 제17권4호
• /
• pp.8-14
• /
• 1984

In this part of the studies on dielectric dehydration of foamed fish-starch paste, quality stability and shelflife of the product of which the preparation formula and processing conditions were described in the previous report (Lee et at., 1982) were determined by means of accelerated reaction test. The product was stored for 50 days under the conditions of temperatures at 35, 45, and 55$^{\circ}C$ in steady state and various water activities of 0.44, 0.52, 0.65, and 0.75, respectively. The loss of available lysine, the extent of TBA value, and the development of browning during the storage were measured and reaction kinetically analysed to assess quality stability and shelf-life of the product for the storage at room temperature of 25$^{\circ}C$. The extent of browning was accelerated with the increase of water activity and temperature marking the time to reach a limit of color and flavor deterioration, or to reach brown color density of 0.17 O.D./g at 420nm, 106 days at a$\_$w/=0.44, 35$^{\circ}C$, and 41 days at aw=0.65, 55$^{\circ}C$. These reaction rates resulted in a prediction of shelf-life, 130 to 110 days in the storage at au=0.44 to 0.75, 25$^{\circ}C$. The quality limit assessed by TBA values and sensory evaluation of rancidity was 87 days at a$\_$w/=0.44, 35$^{\circ}C$, and 30 days at aw=0.73, 55$^{\circ}C$ which gave a predicted shelf-life, 128 to 113 days at a$\_$w/=0.44 to 0.75, 25$^{\circ}C$ storage.