• Proceedings of the KIEE Conference
• /
• 2003.10b
• /
• pp.116-118
• /
• 2003

This paper describes a Accelerated Life Test (ALT) with the electrical contact erosion suitable to the evaluations of high-reliability and durability devices such as magnetic contactor. Recently, an electrical devices company was interested in accelerated life test (ALT), the product liability (PL) and the short-term testing model of electrical life test (ELT). In order to estimate a model for testing fee and period, need to the statistical analysis method with the acceleration factor(AF). Usually customer/manufacturer regard their device failure to the over-current or heavy duty condition, while devices view shape of contact erosion owing to operational duty problem. In this paper, additional method of evaluation estimated the operated cycles by weight of contact erosion with a used of regression analysis by MINITAB.

• Journal of Environmental Science International
• /
• v.6 no.2
• /
• pp.113-124
• /
• 1997

The basic mechanism of the granular sludge formation which is the most important factor in the start-up and stable operators is not confirmed yet. In this study, the effect of granular sludge formation was investigated with the different substrate concentrations and the various ratios of substrate supply/deficiency. The granular sludge formation in the UASB reactor was closely related to the substrate concentrations and the ratio of substrate supply/deficlency The granular sludge formation was not accelerated at low substrate concentration. It was convinced that granular sludge formation was accelerated when the substrate supply with high concentration was stopped at UASB reactor. From this experiment, it was estimated that granular sludge was formed by the combination of hydrogen utilizing bacteria that form hydrogen condition and acid forming bacteria at substrate deficit condition by mutual symbiosis. Though the removal efficiency of organic matter was decreased as the influent substrate concentration was Increased, the higher the influent substrate the better the granular sludge formation.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1712-1717
• /
• 2007

This paper presents a derating design approach for reliability improvement of an aluminum electrolytic capacitor. The capacitor, usually mounted in a printed circuit board, is used to stabilize the circuit. The main failure mechanism of interest is dry-up of the electrolyte that is mainly caused by two stresses-temperature and voltage. The lifetime under these stresses is modeled as a function of these stresses and time using accelerated life testing. Quantitative variation in the lifetime, according to variations in these stresses, is investigated to perform the derating design of the capacitor so that the stress levels are selected to achieve required reliability measures for reliability improvement. Moreover, sensitivity analysis shows which stress would be a more important factor determining the lifetime.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1667-1672
• /
• 2007

In order to assess the reliability of the exhaust bellows for automobiles, accelerated life test model and procedure are developed. By using this method, failure mechanism and life distribution are analyzed. The main results are as follows; i) the main failure mechanism is crack or breakage of inner flexible tube by shaken displacement at shear direction. ii) temperature is a second factor to affect a failure. iii) the life distribution of exhaust bellows is fitted well to Weibull life distribution and the shape parameter is 13.3 on condition of shaken displacement and $600^{\circ}C$

• Proceedings of the Korean Reliability Society Conference
• /
• 2011.06a
• /
• pp.281-288
• /
• 2011

Hydraulic hose assemblies deliver a fluid power in various oil pressure equipments such as construction machinery, automobile, aircraft, industrial machinery, machine tools, and machinery for ships, or they are used as pipes in oil pressure circuit. However, as the traditional measure for estimating life under the influence of various external factors incurs hardship in terms of time and expenses, it is essential to take accelerated life test by choosing the factor that suits the usage condition of the test object. The objective of the this study is to propose a acceleration model that takes both temperature and pressure without flexing condition into consideration. The life that is calculated by the equation for evaluating life and the test data show similar slopes as a result of comparing and analyzing the equation for evaluating life that is obtained in this research and the test data, which illustrates that they estimate life similarly, and the proposed equation is proved to be an accelerated life equation that presents the test results.

• 한국데이터정보과학회:학술대회논문집
• /
• 2002.06a
• /
• pp.155-167
• /
• 2002

In this paper we consider optimal designs of partially constant-stress life testing which is deviced for three-component mixed systems with the considerably long time. Mixed systems are jointed serial system with parallel system. Test items are run at both use condition and accelerated condition until a specified censoring time. The optimal criterion for the sample-proportion allocated to accelerated condition is to minimized asymptotic variance of the maximum likelihood estimators of the acceleration factor and hazard rates.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1343-1348
• /
• 2008

LEDs which have many merits are widely used in the field of light devices, and have rapidly replaced old light devices such as incandescent or fluorescent lamps. Long life, on the order of 50,000 to 100,000 hours, is one of the key features of light emitting diodes(LEDs) that has attracted the lighting community to this technology. High Power white LEDs have yet to demonstrate this capability. This paper planed accelerated life test that has two factor(temperature, current) and two levels. Finally, using ALTA programs, we estimated the common shape parameter of Weibull distribution, life-stress relationship, B10 life and accelerating factors.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1259-1264
• /
• 2008

This paper presents an accelerated life test for burn out of tungsten filament of automotive halogen lamp. There are many failure modes and failure factors that associated with tungsten filament. But in this explain the dominant failure mode of tungsten filament is the bumout of the filament failure. At first, over voltage, high temperature, inrush current and vibration are selected as stress factors by using of two stage Quality Function Deploymeng(QFD). And we planed accelerated life test that has one factor(voltage) and three levels. By experiment it has absorbed that over voltage has an effect on the life of halogen lamp. Using ALTA programs, we estimated the common shpae parament of Weibull distribution, life-stress relationship and $B_{100p}$ life.

• Journal of Korea Foundry Society
• /
• v.14 no.5
• /
• pp.412-418
• /
• 1994

Efficient algorithm for the solidification simulation by FDM is described from the practical point of views. If a proper time step ${\Delta}t$ is selected, the calculation is accelerated by implicit algorithm with the temperature recovery method of latent heat method. The implicit routine in the calculation is processed by SOR method(relaxation factor＝1.5, truncation error＝$10^{-4}$). The calculation is more accelerated by linear-interpolated explicite algorithm with a time step larger than the minimum value of the time step. This explicit method, which is applicable to the practical casting simulation problems, produces almost same results with about 40% faster calculation speed compared with the conventional explicit method.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.6
• /
• pp.595-606
• /
• 2000

In order to compare analytical conditions for measuring PAHs(polycyclic aromatic hydrocarbons) in ambient air, a series of experiment were conducted using three different types of extraction methods that include:(1) accelerated solvent extraction (ASE), (2) soxhlet, and (3) sonification methods. Efficiency and relevant analytixal parameters for each of these methods were examined on five different types of solvents that include:(1) 10% diethyl ether in n-hexane(v/v), (2) dichloromethane, (3)cyclohexane.(4) toluene, and (5) Benzene: ethanol (4:1). Comparison of extraction efficiency for various combinations between methods and solvents was made through an application of both internal and external standard calibration techniques. The extraction efficiency tests, when checked using both internal and external standards, allowed us to derive meaningful comparison among different techniques and among solvents.