Kim, Doo Hyun;Kim, Sung Chul;Lee, Jong Ho;Kang, Moon Soo;Jeong, Cheon Kee
Journal of the Korean Society of Safety
/
v.36
no.2
/
pp.10-17
/
2021
This paper presents the robust design of each component used in the development of an induction bolt heating system for dismantling the high-temperature high-pressure casing heating bolts of turbines in power plants. The induction bolt heating system comprises seven assemblies, namely AC breaker, AC filter, inverter, transformer, work coil, cable, and CT/PT. For each of these assemblies, the various failure modes are identified by the failure mode and effects analysis (FMEA) method, and the causes and effects of these failure modes are presented. In addition, the risk priority numbers are deduced for the individual parts. To ensure robust design, the insulated-gate bipolar transistor (IGBT), switched-mode power supply (SMPS), C/T (adjusting current), capacitor, and coupling are selected. The IGBT is changed to a field-effect transistor (FET) to enhance the voltage applied to the induction heating system, and a dual-safety device is added to the SMPS. For C/T (adjusting current), the turns ratio is adjusted to ensure an appropriate amount of induced current. The capacitor is replaced by a product with heat resistance and durability; further, coupling with a water-resistant structure is improved such that the connecting parts are not easily destroyed. The ground connection is chosen for management priority.
Journal of the Korean Society of Food Science and Nutrition
/
v.31
no.5
/
pp.770-774
/
2002
The effect of mixing ratio of materials and their retort processing conditions on the physical properties and preference of oyster porridge were investigated. Rice gave adequate viscosity (about 800 cp) to the porridge as it was used 10~12% level and half of it was ground. Potato starch, waxy corn starch, and Perfectamyl AC showed small variation in viscosity unrelated to the temperature, that was a good condition for high quality porridge. Especially, waxy corn starch had a good property for retort porridge because its viscosity was maintained high during the processing and decreased to preferable one after processing. Purity CSC, modified starch gave gum-like texture and didn't cause water-separation much after freezing and thawing treatment of the porridge. Therefore, it was good for enhancing the physical property of the porridge as a co-additive of waxy corn starch when it was used at quarter level of waxy corn starch. Xanthan gum increased dispersibility of materials and it was useful for stabilizing physical quality of the porridge without affecting preference when it was used below 0.2% concentration. As a result, the optimal material-mixing ratio was determined as rice 10% (50% of it was ground), waxy corn starch 1.5%, Purity CSC 0.5%, xmthan gum 0.2%, salt 0.3%, and water 87.5%. Oyster's porridge, retort processed with this recipe, showed stable physical property after 6 month storage at room temperature.
The Journal of Korea Institute of Information, Electronics, and Communication Technology
/
v.9
no.3
/
pp.257-265
/
2016
In this study, an optimal design for motor-driven track type traveling system applied into high clearance working machineries in orchard is proposed. Tractive performance and hill climbing ability were predicted and evaluated for the optimal motor traveling system by taking into account of soil characteristics in orchard utilizing the high clearance working machineries. Design criteria for tractive performance were based on the traction force calculated from tractive effort subtracted by motion resistance, while hill climbing ability had its design criteria that fulfill the climbing 20% slope ground at a speed of 3km/h. Based on the evaluation results of traction and climbing ability, two DC48V, 4500rpm, 1.6kW AC motors were independently applied to both left and right side of orbits; each motor is designed to transmit power on driving sprocket of track type traveling system via 50:1 reduction gear ratio. The motor-driven track type traveling system developed in the study found to have 396 kgf of tractive force, which is 12.5% higher than climbing resistance at orchard soil having 20% slope ground (352 kgf), demonstrating sufficient tractive performance and hill climbing ability.
Oh, Sung-Dug;Bae, Eun Ji;Park, Soo-Yun;Lee, Bumkyu;Yun, Do Won;Suh, Sang Jae
Korean Journal of Agricultural Science
/
v.46
no.4
/
pp.827-841
/
2019
The effect of genetically engineered rice Bt-9 on the diversity and abundance of plant-dwelling insects and spiders was tested under field conditions. Genetically engineered rice Bt-9, expressing mCry1Ac1 from Bacillus thuringiensis, confers resistance to rice leaf roller (Cnaphalocrocis medinalis) and provides tolerance to the herbicide glufosinate (PPT). The study compared Bt-9 and two non-GM reference varieties, Ilmi-byeo and Dongjin-byeo, at LMO isolated fields in Gunwi (Kyungpook National University) and Jeonju (National Institute Agricultural Sciences) in Southern Korea in 2016 - 2017. A total of 40,817 individuals from 62 families and 11 orders were collected from the two living modified organism (LMO) isolated fields. From the three types of rice fields, a total of 13,982, 14,105, and 12,730 individuals from the Bt-9, Ilmi-byeo and Dongjin-byeo were collected, respectively. Throughout the study, the analysis of variance indicated no significant differences (p < 0.05). Multivariate analysis showed that the abundance and diversity of plant dwelling insects were similar. The data on insect species population densities were subjected to principal component analysis (PCA), which did not distinguish among the three varieties, Bt-9 and the non-GM, reference cultivars, during the cultivation years. However, the results of the PCA analysis were completely divided into four groups based on the yearly survey areas. Therefore, there was no evidence for a negative impact of Bt-9 on the above-ground insects and spiders.
Kim, Su-Kyung;Hwang, Eui-Hong;Kim, Young-Hwa;Lee, Chang-Wook
Korean Journal of Remote Sensing
/
v.29
no.5
/
pp.545-554
/
2013
Augustine is an active stratovolcano located in southwest of Cook Inlet, about 290 kilometers southwest of Anchorage, Alaska. Between January 11 and 28, 2006, the volcano erupted explosively 14 times. We collected twelve permanent GPS stations operating by Plate Boundary Observatory (PBO) from 2005 to 2011. All data processing was carried out using Bernese GPS Software V5.0 with IGS precise orbit. Static baseline processing by fixing AC59 station was applied for the volcano activity monitoring. AC59 is the nearest (about 24.5 km) station to Augustine volcano, and located on North America Plate including Augustine Island. The test results show inflation (9.7 cm/yr) and deflation (-9.2 cm/yr) of volcano before and after eruption around crater clearly. After volcano activity has reached a plateau, some of the GPS stations installed north of the volcano show ground subsidence phenomenon caused by compaction of pyroclastic flows. These results indicate the possibility of using surface deformation observed by GPS for monitoring and prediction of volcano activity.
Journal of the Korean Society of International Agriculture
/
v.23
no.5
/
pp.570-577
/
2011
We developed insect-resistant GM rice(Bt transgenic rice) by inserting the mCry1Ac1 a modified gene from the soil bacterium, Bacillus thuringiensis. The Bt transgenic rice expressing the Bttoxin mCry1Ac1 was tested for the effects on survival of Misgurnus anguillicaudatus and Cyprinus carpio, commonly used as a model organism in ecotoxicological studies. M. anguillicaudatus and C. carpio fed 100% ground rice in suspension, using either Bt rice or non-GM counterpart rice(Nakdong). The Bt rice used for the test were confirmed to have the mCry1Ac1 gene expression by the immuno-strip and ELISA analysis. Feeding test showed that no significant differences in cumulative immobility and abnormal response of M. anguillicaudatus and C. carpio fed on between Bt rice and non-GM counterpart rice. The 96hr-LC50 values showed no difference between Bt rice(>1,000mg/L) and non-GM rice(>1,000mg/L). We concluded that there was no significant difference in toxicity for non-target organisms(M. anguillicaudatus and C. carpio) between Bt rice and non-GM counterparts.
Kim Han Jun;Lee Rae Duk;Semenov Yu. P.;Han Sang Ok
KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
/
v.5B
no.3
/
pp.283-288
/
2005
A portable primary inductance standard set that includes a Maxwell-Wien bridge and a 10 mH standard inductor installed in a thermostat has been developed at KRISS. Two auxiliary resistance capacitance networks (analogous to a 'Wagner ground') provide excellent stability of the bridge balance and impose less strict requirements on the components of these networks. Removable capacitance and ac-dc resistance standards used in the bridge arms made it possible to reproduce 10 mH and 100 mH inductance values in the frequency range of 500 Hz to 3 kHz. From investigations of this standard and preliminary comparison with VNIIM (D. I. Mendeleyev Institute for Metrology), the results have demonstrated that the bridge can be used as a part of the transportable inductance standard with a measurement uncertainty within (1-3) $\mu$H/H at frequencies of 1 kHz and 1.6 kHz. The application of the bridge as a constituent part of the transportable standard gives us an opportunity to eliminate the influence of the standard inductors.
Naeini, Ehsan Mostaghimi;Vaseghi, Behrouz;Mahdavian, Mehdi
Journal of Electrical Engineering and Technology
/
v.12
no.2
/
pp.533-540
/
2017
Distance relay identifies the type and location of fault by measuring the transmission line impedance. However any other factors that cause miss calculating the measured impedance, makes the relay detect the fault in incorrect location or do not detect the fault at all. One of the important factors which directly changes the measured impedance by the relay is series capacitive compensation (SCC). Another factor that changes the calculated impedance by distance relay is fault resistance. This paper provides a method based on the combination of distance and differential protection. At first, faulty transmission line is detected according to the current data of buses. After that the fault location is calculated using the proposed algorithm on the transmission line. This algorithm is based on active power calculation of the buses. Fault resistance is calculated from the active powers and its effect will be deducted from calculated impedance by the algorithm. This method measures the voltage across SCC by phasor measurement units (PMUs) and transmits them to the relay location via communication channels. The transmitted signals are utilized to modify the voltage signal which is measured by the relay. Different operating modes of SCC and as well as different faults such as phase-to-phase and phase-to-ground faults are examined by simulations.
Proceedings of the Korean Vacuum Society Conference
/
2015.08a
/
pp.250.2-250.2
/
2015
결정질 태양전지의 변환효율은 이미 이론적 한계에 가까워져, 최근 산업에서는 이 대신 제조공정 단가를 낮추려는 연구가 진행되고 있다. 본 연구에서는 태양전지 도핑공정에 대기압 DBD 플라즈마를 응용하여 저렴하게 태양전지를 제작할 수 있는 방법을 모색한다. 대기압 DBD 플라즈마를 발생시키기 위해 DC-AC 인버터 구조의 전원을 사용하여 수십 kHz의 주파수, 수 kV의 전압을 인가하여 $5cm{\times}1cm$ 직사각형 모양의 아노다이징된 알루미늄 전극을 사용하였다. 전극과 Ground 사이에 Argon 가스를 주입하여 플라즈마를 발생시켰으며, 출력전류는 수십 mA의 전류가 측정되었다. $3cm{\times}3cm$의 P-type wafer에 스핀코팅 방식으로 H3PO4를 도포한 후, Wafer 표면에 플라즈마를 조사하여 대기압 DBD 플라즈마를 이용한 태양전지 도핑 가능성을 확인하였다. 플라즈마 출력 전류와 플라즈마 조사시간을 변수로 도핑된 Wafer의 특성을 확인하였다. 도핑 프로파일은 SIMS (Secondary Ion Mass Spectrometry)를 통해 측정하였으며, 전기적인 특성은 4 point probe로 면저항을 측정하였다. 대기압 DBD 플라즈마를 이용해 도핑된 wafer에 전극을 형성하여, 같은 도펀트를 사용하여 Furnace로 열 확산법을 이용해 도핑 공정을 진행한 wafer와 변환효율(Conversion efficiency)을 측정하여, 대기압 플라즈마를 이용한 도핑 가능성을 확인하였다.
The Transactions of The Korean Institute of Electrical Engineers
/
v.62
no.7
/
pp.950-955
/
2013
This paper proposes a new low-cost current detection method to implement vector-controlled inverter of 3-phase induction motor or permanent-magnet synchronous motor using 2 shunt resistors instead of expensive Hall current sensors. The proposed method can detect perfect phase currents without current-immeasurable area in all operating conditions of motor. This method uses 2 shunt resistors in Hall current sensor positions conventionally used to detect phase currents. Therefore, it requires accurate analog differential amplifiers to detect voltages across shunt resistors at high electric potential to ground. We show the good solutions which are implemented by voltage-divider resistors networks and the instrumentation amplifiers using several Op Amps at cheap price. Computer simulations and experiments were performed to confirm the effectiveness of proposed method. These results show that proposed method can perfectly detect phase currents without current-immeasurable area in all operating conditions of motor.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.