• Journal of the Korean Solar Energy Society
• /
• v.24 no.1
• /
• pp.53-61
• /
• 2004

Absorption potential of desiccant solution significantly decreases after absorbing moisture from humid air, and a regeneration process requires a great amount of energy to recover absorption potential of desiccant solution. In an effort to develop an efficient solar water heater, this study examines a regeneration process using hot water obtained from solar water heater to recover absorption potential by evaporating moisture in the liquid desiccant. In this paper, a solar absorption dehumidifying system with solar water heater is suggested to save the electricity for operating an air conditioner. LiGl(lithium chloride) solution was adopted as a liquid desiccant in the proposed system, and hot water obtained from the solar water heater was used for regenerating the liquid desiccant. As a result, it was clear that the dilute LiCl solution could be regenerated by hot water, and the regeneration rate depends mostly on temperature level of liquid desiccant. The regeneration rates were about 2.4kg/h with $40^{\circ}C$, 4.0kg/h with $50^{\circ}C$, and 6.2kg/h with $60^{\circ}C$ of hot water respectively.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.11 no.1
• /
• pp.8-14
• /
• 1975

The optical properties of the sea water were studied by use of underwater lux-meters in the coastal waters of Busan from May to November 1975. The absorption coefficient of the sea water in the area ranges from O. 169 to 1. 049 and the mean absorpflOn coefficient is 0.413. Maximum monthly mean absorption coefficient (0. 56) was observed in August, while the minimum was O. 338 in September. There was a distinct discontinuity layer of the absorption coefficient in accordance with the thermocline and the halocline in summer. The mean transparency of the area was 3. 8 meters, and transparency in autumn was higher than that in summer. The relation between absorption coefficient (m) and transparency (D) was deduced, m=1. 57/ D. The rate of light penetration at 5 m-layer of sea water was 2. 5 percent when the solar altitude was six degree in July 1975.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.6 no.1
• /
• pp.67-74
• /
• 1988

Absorption rates of oxygen in water soluble inks on the printing rollers were measured. As a results of experiments, could be obtained the data of rates of absorption of oxygen in 4 kinds of water soluble inks, and found the difference of absorption rate of oxygen on the parallel plates and rotating rolles.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.533-538
• /
• 2014

Power generator is one of the most important component of electricity generation system to convert mechanical energy to electrical energy. I t designed robustly to maintain high system reliability during operation time. But unexpected failure of the power generator could happen and it cause huge amount of economic and social loss. To keep it from unexpected failure, health prognostics should be carried out In this research, We developed a health prognostic method of stator windings in power generator with statistical data analysis and degradation modeling against water absorption. We divided whole 42 windings into two groups, absorption suspected group and normal group. We built a degradation model of absorption suspected winding using Fick's second law to predict upcoming absorption data. Through the analysis of data of normal group, we could figure out the distribution of data of normal windings. After that, we can properly predict absorption data of normal windings. With data prediction of two groups, we derived upcoming Directional Mahalanobis Distance (DMD) of absorption suspected winding and time vs DMD curve. Finally we drew the probability distribution of Remaining Useful Life of absorption suspected windings.

• Fashion & Textile Research Journal
• /
• v.20 no.4
• /
• pp.457-463
• /
• 2018

This study examined the water absorption and drying properties of the thirteen types of the knitted fabrics for sports wear. These physical properties were analysed with relation to the constituent fiber cross-sectional shape and structure parameters of the knitted fabrics by regression analysis. Absorption and drying properties of the knitted fabric specimens were increased with increasing the porosity of the constituent yarns, which was attributed to the capillary channels in the yarns. The water absorption and drying properties were increased and decreased with increasing tightness factor and stitch density of the knitted fabric. The absorption property of the knitted fabric for perspiration absorption and fast dry sport-wear clothing was mostly influenced mostly by fiber cross-sectional shape and its characteristics, whereas, drying property was dependent on the structural parameters of the knitted fabric such as tightness factor and stitch density. Therefore, superior perspiration absorption and fast drying knitted fabric could be obtained in the fabric structure with optimum tightness factor and stitch density, and constituent yarn structure with non-circular fiber crosssection and high porosity. GATS method and MMT method are used to measure sweating fast drying properties and it is necessary to carry out studies using these measurement methods in order to compare with the results of this study.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.223-226
• /
• 2002

This study is performed to investigate the influence of aggregate factor on the estimation of water content in fresh concrete. According to the results, water content is estimated higher in the case of basalt and granite aggregate than in the case of limestone because absorption water ratio of basalt and granite is large. As the replacement ratio of recycled aggregate increases, water content is estimated higher. But, after correcting absorption water ratio of aggregate, estimated water content is similar to mixture water content. Therefore, it is important to know the absorption water ratio of aggregates accurately, to estimate water content.

• Journal of Nutrition and Health
• /
• v.33 no.7
• /
• pp.717-724
• /
• 2000

A number of epidemiological studies has indicated lifestyles including dietary habits are closely related to the development of certain forms of cancer. These findings have led several investigators to identify the ways in which these factors mdulate the risk of cancer. Seaweeds are rich sources of non-digestible polysaccharides which possibly posses physiological functions. In vitro studies showed several components in seaweeds inhibit tumor cell growth and mutagenicity of known food mutagens. On the other hand non-digestible polysaccharides of different food sources negatively affect mineral nutrition by decreasing mineral absorption. The objectives of this study was to investigate the effect of major seaweed intake on azoxymethane(AOM) - induced DNA damage a known cancer initiation step and on apparent absorption of calcium and iron. To accomplish these objectives twenty five ICR mice were divided into five groups and fed one of the following diets for 10 days : control diet d, diet containing 10% water-soluble fraction of seamustard or seatangle diet containing 10% water-insoluble fraction of seamustard or seatangle. AOM was injected 6 hours before sacrifice and N7-methylated guanines from the colonic DNA were quantified using a gas chromatography -mass spectroscopy. Fecal samples were collected on days 4 and 8. Caclium and iron contents of the diets and feces were analyzed using an atomic absorption spectrophotometry to determine the apparent absorption of these minerals. Results are as follows. AOM-induced guanine methylation of colon was decreased in animals fed diets containing water-soluble fractions of seamustard or seatangle compared to those in animals fed control diet although only the seatnagle fed group showed statistically significant effect. Apparent calcium absorption was significantly reduced in animals fed diets containing water-insoluble fractions of seaweeds. Iron absorption was significantly decreased and negatively balanced in animals fed diets containing water-insoluble fractions of both seaweeds, and water-soluble fraction of seatangle. In conclusion, seamustard and seatangle intakes may effectively prevent colon tumorigenesis by reducing a carcinogen-induced DNA damages, and more mechanistic studies on possible role of seaweeds on carcinogenesis are required. Also, adverse effects of seaweed diets cintaming a large amount of polysaccharides on mineral nutrition should be carefully monitored.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.41 no.3
• /
• pp.209-218
• /
• 2015

Once powder base makeup products are applied to the skin, the products are formed a film and attached on the skin for 8 to 12 hours. The makeup film is deformed by secretions such as sweat and sebum secreted from the skin. Thus, durability of the film is an important quality factor in the makeup and its evaluation is also important. In this study, characteristics of the semi-finished powder products such as water absorption, oil absorption, water repellent and oil repellent were evaluated in a number of ways. Also, simple methods, which are not affected by evaluation conditions such as a difference between sweat and sebum secretion, temperature and humidity, were examined to predict the durability of the products. We measured water absorption, oil absorption, water repellent and oil-repellent properties of semifinished product by tablet, capillary and dipping method and then compared with the data of color difference meter and ROBO skin analyzer. Results showed that the durability of powder base makeup products was associated with more oil absorption and water-repellent characteristics than water absorption and oil-repellent. Oil absorption characteristics by tablet and capillary method and water-repellent characteristics by dipping method provides a simple and quick method to precdict the durability of the makeup products.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.2
• /
• pp.332-337
• /
• 2004

The use of gas absorption refrigeration machine has considerably increased because of the shortage of the electric power in the summer and the regulation of freon refrigerant. Gas absorption refrigeration machine consists of a condenser, a heat exchanger. supplying pipes, a radiator etc, This system is likely to be corroded by acid. dissolved oxygen and gases, Cavitation erosion-corrosion by flow velocity of cooling water may happen in absorption refrigeration machine. In these cases. erosion and corrosion occur simultaneously. Then, it makes a serious damage with synergy effect. Therefore, this paper was studied on the cavitation damage of cupronickel(70/30) tube for gas absorption refrigeration machine, In the $30^{\circ}C$ tap water, linear polarization test and anodic polarization test were carried out for copper(C1220T-OL) and cupronickel(70/30) tube. Also, cavitation erosion-corrosion behavior of cupronickel (70/30) tube was considered, The main results are as following: (1) In the linear test, the corrosion current density of cupronickel(70/30) is higher than that of copper. (2) The erosion-corrosion rate of cupronickel(70/30) displayed later tendency than that of copper by vibratory cavitation in cooling water. (3) In cooling water, the progress mechanism of erosion-corrosion rate of copper and cupronickel(70/30) follows a pattern of incubation, acceleration, attenuation and a steady state period.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.6
• /
• pp.56-66
• /
• 1998

The absorption process of water vapor in a liquid film is an important process in LiBr-Water absorption system. The composition of the gas phase, in which a non-absorbable gas is combined with the absorbate, influences the transport characteristics. In the present work, the absorption processes of water vapor into aqueous solutions of lithium bromide in the presence of non-absorbable gas are investigated. The continuity, momentum, energy and diffusion equations for the solution film and gas are formulated in integral forms and solved numerically. It is found that the mass transfer resistance in gas phase increases with the concentration of non-absorbable gas. However the primary resistance to mass transfer is in the liquid phase. As the concentration of non-absorbable gas in the absorbate increases, the interfacial temperature and concentration of absorbate in solution decrease, which results in the reduction of absorption rate. The reduction of mass transfer rate is found to be significant for the addition of a small amount of non-absorbable gas to the pure vapor, especially at the outlet of tube where the non-absorbable gas accumulates. At higher non-absorbable gas concentration, the decrease of absorption rate seems to be linear to the concentration of non-absorbable gas.