• Bulletin of the Korean Chemical Society
• /
• v.6 no.1
• /
• pp.23-29
• /
• 1985

The charge-transfer complexing properties of 1-methyl nicotinamide (MNA), an acceptor, and adenine, a donor, were investigated in water and SDS micellar solutions in relation to the intramolecular interaction in nicotinamide adenine dinucleotide ($NAD^+$). The spectral and thermodynamic parameters of MNA-indole and methyl viologen-adenine complex formations were determined, and the data were utilized to evaluate the charge-transfer abilities of MNA and adenine. The electron affinity of nicotinamide was estimated to be 0.28 eV from charge-transfer energy $of{\sim}300$ nm for MNA-indole. The large enhancement of MNA-indole complexation in SDS solutions by entropy effect was attributed to hydrophobic nature of indole. The complex between adenine and methyl viologen showed an absorption band peaked near 360 nm. The ionization potential of adenine was evaluated to be 8.28 eV from this. The much smaller enhancement of charge-transfer interaction involving adenine than that of indole in SDS solutions was attributed to weaker hydrophobic nature of the donor. The charge-transfer energy of 4.41 eV (280 nm) was estimated for nicotinamide-adenine complex. The spectral behaviors of $NAD^+$ were accounted to the presence of intramolecular interaction in $NAD^+$, which is only slightly enhanced in SDS solutions. The replacement of nicotinamide-adenine interaction in $NAD^+$ by intermolecular nicotinamide-indole interaction in enzyme bound $NAD^+$, and guiding role of adenine moiety in $NAD^+$ were discussed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1505-1510
• /
• 2014

High-Pass (ETC ; Electronic Toll Collection) system is one of the basic elements, which adopts a wireless communication method using 5.8 GHz and can realize a part of ITS (Intelligent Traffic System). On the other hand, communication errors occur frequently in Hi-Pass system due to signal erros, multi-path reflection, and/or system-to-system interferences. To solve these problems, an EM (Electro-Magnetic) wave absorber can be used. To solve these Problems, we fabricated some samples in the different composition ratios of Carbon, Sendust, and CPE, and it was confirmed that the optimum composition ratio of Carbon : Sendust : CPE is 10 : 40 : 50 wt.%. The complex relative permittivity and complex relative permeability were derived by using the measured data. In addition, the optimum design parameters for the absorber were determined by simulation. Then the absorption abilities were calculated by changing the thickness of the EM wave absorbers. As a result, the optimum thickness of the developed EM wave absorber was 2.85 mm with absorption ability over 22.4 dB at 5.8 GHz. Futhermore, the EM wave absorber was fabricated based on the simulated and designed values. The measured values agreed well with the simulated ones. Therefore, it was clearly shown that the developed EM wave absorber in this paper is to be applied in actual situations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.10
• /
• pp.841-850
• /
• 2015

With the rapid progress of electronics and radio communication technology, human enjoys greater freedom in information communication. However, EMW(Electro-Magnetic Wave) environments have become more complicate and difficult to control. Thus, international organizations, such as the American National Standard Institution(ANSI), Federal Communications Commission(FCC), the Comite Internationale Special des Perturbations Radio Electrique(CISPR), etc, have provided standard for controlling the EM wave environments and for the countermeasure of the electromagnetic compatibility(EMC). In this paper, fabrication of the smart EMW absorber which has heat radiating function and high performance absorption abilities were suggested. Furthermore, we prospected future smart EMW absorbers. The designed smart EMW absorber is fabricated following process. Firstly, we applied high temperature heat treated to a mixture of Iron-oxide($Fe_2O_3$) and ceramics. Secondly, we applied low temperature heat treated to the mixture of heat treated material and a carbon material. Lastly, we made apertures on the absorber. The designed smart EM wave absorber has the absorption ability of more than 20 dB from 2 GHz to 2.45 GHz band, respectively. Thus, it is respected that these results can be applied as various EMC devices in electronic, communication, and controlling systems.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.3
• /
• pp.222-229
• /
• 2009

In this paper, we designed and fabricated the EM wave absorbers for preventing the reduction of the communication range when RFID Tag is approached to a metal plate. The EM wave absorber samples were fabricated with difference composition ratios of Amorphous metal powder and CPE, the absorption abilities of which were simulated by substituting different thicknesses of the EM wave absorbers. Then the EM wave absorbers are manufactured based on the simulated results. By using the EM wave absorbers, we have confirmed the improvement effect of RFID tag antenna and the increase of communication range of RFID system. As a result, it was cleary shown that the communication range of RFID system is improved by adopting the EM wave absorber with the composition ratio of Amorphous metal powder:CPE=80:20 wt.% and the thickness of 4 mm. Thus, it was confirmed that the proposed EM wave absorber can increase the communication range of RFID system from 0.8 m to 5.2 m in UHF band.

• Advances in materials Research
• /
• v.3 no.4
• /
• pp.183-197
• /
• 2014

Copolymers of gelatin and poly (vinyl alcohol), (PVA) grafted by acrylic acid (AAc) with excellent water absorption and retention abilities under neutral conditions were successfully synthesized using $^{60}Co$ gamma radiations in presence of ammonium persulphate (APS), as water soluble initiator and sodium bicarbonate ($NaHCO_3$) as foaming agent. The optimum synthesis conditions pertaining to maximum swelling percentage were evaluated as a function of gelatin/PVA ratio, amount of water, concentration of APS, $NaHCO_3$, monomer concentration and total irradiation dose. Maximum percent swelling (1694.59%) of the copolymer, gelatin-co-PVA, was obtained at optimum $[APS]=2.92{\times}10^{-1}mol/L$, $[NaHCO_3]=7.94{\times}10^{-2}mol/L$ and 1.5 mL of water at total dose of 31.104 kGy while in case of grafted copolymer, (gelatin-co-PVA)-g-poly(AAc), maximum percent swelling (560.86%) was obtained using $8.014{\times}10^{-1}mol/L$ of AAc in 9 mL water with 31.104 kGy preirradiation dose. The pristine and grafted copolymers were characterized by Fourier Transform Infrared Spectroscopy (FTIR), Scanning electron Microscopy (SEM), Thermal gravimetric analysis (TGA) and X-Ray Diffraction (XRD) methods. The copolymers loaded with an antiseptic, Povidone, were used as wound dressing materials for wounded gastrocnemius muscle of mice and the results exhibit that (gelatin-co-PVA)-g-poly (AAc) copolymer is a potent wound dressing material as compared to the copolymer.

• Journal of Crop Science and Biotechnology
• /
• v.11 no.1
• /
• pp.31-38
• /
• 2008

Improvement of $N_2$ fixation by symbiotic rhizobia is considered an effective means for enhancing its productivity without high input of nitrogen(N) fertilizer. Several methods to improve $N_2$ fixation have been proposed including the use of supernodulating mutants. The objective of this research was to identify the varietal difference in N and $N_2$-fixation ability among the soybean supernodulating mutants, SS2-2 and Sakukei 4, with different nodulation abilities using $^{15}N$ in field conditions in both Korea and Japan. The dry weight(DW) was higher in wild-type soybeans. The distribution rate of DW in each plant part was high in seeds of supernoduating and wild-type soybeans but high in stems and leaves of non-nodulating mutants. Although the supernodulating mutants had a low DW rate at maturity, they showed a similar $N_2$ fixation ability compared with wild-type. Supernodulating mutant plants mainly obtained N from $N_2$ fixation, while soil N was the main resource for obtaining N in non-nodulating mutants. The percentage of N derived from atmospheric dinitrogen(Ndfa) was higher in supernodulating mutants than in wild-type and relatively high in seeds between plant parts at maturity. In particular, supernodulating mutants showed higher N content in roots than those of wild-type and non-nodulating mutants. It was considered that supernodulating mutants have the advantage of saving nitrate in soil and being beneficial for N absorption of subsequent crops due to their conserving more N in the field and releasing considerable amounts of N from roots and leaves fallen to the soil.

• Korean Journal of Human Ecology
• /
• v.19 no.4
• /
• pp.699-707
• /
• 2010

Catechu is widely used as in natural dyeing as well as in various medicines and tannage. This study investigated the dyeing properties and functionality of Catechu through a series of dyeing experiments using cotton fabric. It was shown that the absorbance of Catechu solution has two peaks at 220nm and 280nm. Thus, it can be concluded that the color constituent of Catechu is a catechol tannin and color tone is YR. The dyeability of Catechu increases as the concentration of the dye is increased. Its variation was shown to be similar to the isothermal absorption curve of the Freundlich. As dyeing time was increases, the dyeability did not change significantly after the 30 minute mark was passed. At high temperatures the dyeability was shown to increase. As the dyeing temperature was increased the color of dyeing fabrics changes from Y and YR to R. Experiments with pre-mordanting method showed that various colors can be obtained using Catechu. Cotton is effective in using K, Cu, Fe mordants, and the dyeability was shown to be improved with low pH. Both washing fastness and light fastness were shown to be low. However, the fabric color gradually changed to red was due to mailard reaction of catechol tannin causing by repeated washing and sunlight. The ultraviolet-cut ability was improved for cotton fabric dyed with Catechu. Also, dyed fabric with Catechu showed very good antimicrobial abilities at 99.9%.

• Journal of Sericultural and Entomological Science
• /
• v.36 no.1
• /
• pp.37-43
• /
• 1994

The effects of some sodium phosphates as auxiliary agents were studied on the blockade of hardness for silk degumming. In this work, four kinds of sodium phosphates were tested and the results were obtained through masking effects of metallic ions, difference of pH value and boil-off ratio. The degumming of calcium ingredient was analyzed by means of atomic absorption spectrophotometer and degumming test of cocoon shell was performed in the presence of calcium ingredient and sodium phosphates added to soap solution. In the view of the effects of sodium phosphates on calcium hardness, tetrasodium pyrophosphate(TSPP) and sodium phosphate dibasic(SPD) masked calcium ions more than sodium phosphate monobasic(SPM) and sodium hexametaphosphate(SHP). SHP and TSPP have excellent abilities of masking ferrous ions. The pH values of TSPP solution is higher than others, but lower than soap solution. The pH values were differently measured one another among the sodium phosphates but the boil-off ratio was increased in case of sodium phosphate with high pH value.

• Archives of Pharmacal Research
• /
• v.18 no.4
• /
• pp.231-236
• /
• 1995

Effects of sodium salts of various monovalent inorganic anions on transdermal permeation of salicylic acid were investigated. In in-vitro experiment using a Franz-type diffusion cell and excisicylic acid were investigated. In-vitro experiment using a Franze-type diffusion cell and excised mouse skin, the permeation-enhancing activities of the sodium salts of inoraganic anions were rougly proportional to lyotropic Hofmeister serlling abilities of the anions l F/sup -/

• The KIPS Transactions:PartA
• /
• v.12A no.6 s.96
• /
• pp.547-556
• /
• 2005

Online collaborative teaming, which has emerged as a new type of education in knowledge-based society, is being discussed actively in the areas of action learning at companies and project-based learning and inquiry-based learning at schools. It regards as an effective method for improving learners practical and highly advanced problem solving abilities, and for stimulating their absorption into learning through pursuing common goals of learning together. Different from individual learning, however, collaborative learning involves complicated processes such as organizing teams, setting common goals, performing tasks and evaluating the outcome of team activities .Thus, it is difficult for a teacher to promote and evaluate the whole process of collaborative learning, and it is necessary to develop systems to support collaborative learning. Therefore, in order to monitor and promote interaction among learners in the process of collaborative learning, the present study developed an extensible collaborative teaming supporting agent (ECOLA) in online learning environments.