Galerkin 유한요소법을 사용한 항 정온도 수치모형을 제시하고 Chen(1986)이 유도한 마찰을 포함한 완경사 파랑식을 지배방정식으로 사용하였다. 그러나 기존의 흡수 경계조건은 잘못된 것임을 보이고 올바른 경계조건 및 평면 입사파에 의한 외력항을 유도하였다. 직선항만에 대한 계산결과를 수리실험 결과 및 기존 결과와 비교하기 위해 도시하였다. 이 경우에 대한 마찰계수의 값(f)과 반사계수의 값(K$_{r}$)을 검토한 후 계수들의 조합 $K_{r}$ =0.94, f=0에서 수치결과가 실험 결과에 잘 부합되는 것으로 나타났다.
We provide a set of information on technologies to draw meaningful action plans for the internationalization on National R&D activities. In this study, we employed a modiffed Delphi method to evaluate levels of our technological capabilities and developed countries as well. We investigated technology acquis- tion methodologies, technology characteristics and various aspects of international cooperation in terms of technology. Then, we analyzed final responses of participants (i.e., the third round results of Delphe method) to see the correlation among various factors in developing technologies through international R&D cooperation. The technology classification used in this research was developed by STEPI (Science and Technology Policy Institute). In conclusion, levels of our technologies were investigated to be between the stage of imi- tating/absorbing advanced thechnologies and the stage of digesting acquired technologies. Especially, com- paring with other technologies, mechanical engineering was evaluated to be almost near the stage of digesting acquired technology(the middle level stage of technology). Our overal technological capabilities were evaluated to be 40 .approx. 60% of top level countries.
This paper presents the characteristics of the energy absorption in an expansion tube type impact absorber that is applied to a high weight drop tester and the use of a response surface methodology to predict the impact energy absorption. In order to identify the characteristics of the energy absorption, a set of finite element analysis was conducted with Abaqus Explicit. Moreover, the ISCD-II sampling method and a first order polynomial were used to build a response surface. As a result, we demonstrated that the impact energy could be controlled by four main design variables, namely an expansion pipe's thickness, inner radius, pressing die's expansion angle and expansion ratio. Additionally, we observed the relationship between the four main design variables and the impact energy absorbing time, displacement, and maximum impact force.
Most developing countries are experiencing rapid urbanization and the associated growth of industry and services. Cities are currently absorbing two-thirds of the total population in the developing world. Korea has about 85 percent of urban dwellers. World population will shift from being predominantly rural to predominantly urban around the turn of the century. Although cities play a key role in development process and make more than a proportionate contribution to national economic growth, especially cities are also the main catalysts of economic growth in developing countries, they can also be unhealthy, inefficient, and inequitable places to live. Most developing countries are increasingly unable to provide basic environmental infrastructure and services, whether in the megacities or in secondary urban centers. Of particular concern is the strain on natural resources brought by the increasing number of people, cars, and factories. They are generating ever greater amounts of urban wastes and emissions. They also exceed the capacity of regulatory authorities to control them and of nature to assimilate them. The environmental consequences are translated into direct negative impacts on human health, the quality of life, the productivity of the city, and the surrounding ecosystems. Environmental degradation threatens the long tenn availability and quality of natural resources critical to economic growth. Cities, with their higher and growing per capita energy use for domestic, industrial, and transport purpose also contribute a disproportionate share of the emission leading to global warming and acid rain. An important priority is to develop strategic approaches for managing the urban environment. The design of appropriate and lasting strategic responses requires first an understanding of the underlying causes of urban environmental deterioration, it is necessary that longer tenn objectives should be set for urban area to avoid irreversible ecological damage and to ensure lasting economic development. As a means to the preventive policies against the adverse effect, environmental impact assessment (EIA) serve to identify a project's possible environmental consequences early enough to allow their being taken into consideration in the decision making process for urban planning. This paper describes some considerations of EIA for urban planning-scoping, assessment process, measurement and prediction of impacts, pollution controls and supervision, and system planning for environmental preservation.
기존 단열재의 주된 기능은 단지 열전달을 차단하는 기능과 건물로부터 열손실을 줄여주는 기능만을 수행했다. 반면, 축열재는 특정온도 범위 내에서 열에너지를 저장 또는 방출함으로써 건물에너지 사용량을 절감할 수 있다. 축열 건자재는 실내 공기온도 변화주기를 효과적으로 조절하여 일정하게 온도를 유지시킬 수 있다. 결과적으로 냉난방시스템 기능을 효율적으로 향상시킬 수 있다. 본 연구는 건축자재로 많이 이용되고 있는 석고보드에 상변화잠열물질을 축열재로 첨가하여 그 물성과 열환경 특성을 파악하였다. 또한 축열 건자재를 활용할 때 발생가능한 문제점을 확인하였다. 마지막으로 TVOC와 HCHO 함량 분석으로부터 오염물질의 배출가능성을 조사하여 축열 건자재의 환경 친화도를 검토하였다.
In this study, the newly constructed optical measurement system, which was mainly composed of a parametric tunable laser and a near infrared photoelectric multiplier, was introduced to clarify the optical characteristics of wood as discontinuous body with anisotropic cellular structure from the viewpoint of the time-of-flight near infrared spectroscopy (TOF-NIRS). The combined effects of the cellular structure of wood sample, the wavelength of the laser beam λ, and the detection position of transmitted light on the time resolved profiles were investigated in detail. The variation of the attenuance of peak maxima At, the time delay of peak maxima Δt and the variation of full width at half maximum Δw were strongly dependent on the feature of cellular structure of a sample and the wavelength of the laser beam. The substantial optical path length became about 30 to 35 times as long as sample thickness except the absorption band of water. Δt ${\times}$ Δw representing the light scattering condition increased exponentially with the sample thickness or the distance between the irradiation point and the end of sample. Around the λ=900-950 nm, there may be considerable light scattering in the lumen of tracheid, which is multiple specular reflection and easy to propagate along the length of wood fiber. Such tendency was remarkable for soft wood with the aggregate of thin layers of cell walls. When we apply TOF-NIRS to the cellular structural materials like wood, it is very important to give attention to the difference in the light scattering within cell wall and the multiple specular-like reflections between cell walls. We tried to express the characteristics of the time resolved profile on the basis of the optical parameters for light propagation determined by the previous studies, which were absorption coefficient K and scattering coefficient S from Kubelka-Munk theory and n from nth power cosine model of radiant intensity. The wavelength dependency of the product of K/S and n, which expressed the light-absorbing and -scattering condition and the degree of anisotropy, respectively, was similar to that of the time delay of peak maxima Δt. The variation of the time resolved profile is governed by the combination of these parameters. So, we can easily find the set of parameters for light propagation synthetically from Δt.
본 연구는 자원의 재활용 측면에서 적용한 폐타이어 분말을 혼입한 모르타르에 난연제를 첨가하여 그 난연특성을 알아보고자 한다. 폐타이어 분말의 혼입으로 단열성능 향상은 이미 검증이 되었으나, 단열성과 결합력의 상반된 재료 특성으로 인해 화재에는 취약한 바. 이에 난연제를 첨가하여 인명안전에 만전을 기하고자 한다. 폐타이어 분말을 혼입한 모르타르의 난연제를 첨가하여 첨가 비율에 따른 그 특성을 알아보고자 한다. 화재 초기의 특성을 알 수 있는 재료의 가연성 여부를 실제 화재와 유사한 복사열에 의해 시험하고자 하였으며. 실험방법은 한국건자재 시험연구원에 의뢰하여 ISO 5657 절차에 의한 재료의 착화시간, 불꽃 발생여부, 시험체의 형태변화 등을 고찰하고자 한다. 폐타이어 분말이 혼입된 모르타르와 난연제(무기계)의 배합비율은 폐타이어 분말의 0%, 30%, 60%, 90% 비율로 수산화알루미늄을 첨가하며 조연제인 삼산화안티몬은 난연제의 10%를 첨가한다. 시험체를 수평설치하여 일정한 복사열($1{\sim}5W/cm^2$)을 시험체 상부표면에 노출시키면 열이 시험체 표면에서 내부로 전도되어 온도가 상승한다. 온도가 충분히 높다면 시험체는 열분해하면서 가연성가스를 발생시킨다. 이 때 점화원인 점화기구의 작은 불꽃은 시험체 중앙 위의 10mm 지점에 규칙적인 간격으로 접염하였을때의 재료의 지속적인 표면 착화특성(착화시간) 평가한다. 난연제 미첨가시에도 착화가 일어나지 않아 폐타이어분말이 혼입된 모르타르의 가연성은 적은 것으로 볼 수 있으며, 화재실내에 존재하는 가연물의 양을 평가하는 화재하중에 이를 반영할 수 있다. 폐타이어 분말에 무기계 난연제를 첨가함에 따라 흡열효과에 의해 불꽃은 발생하지 아니하고 폐타이어 분말입자의 분해속도도 지연되었음을 확인할 수 있다. 복사열로 인해 난연제인 수산화알루미늄이 열분해하여 모르타르내 수증기 분압이 증가하여, 폐타이어 분말의 불꽃이나 연소형태는 보이지 않았다.
기업 경쟁력의 원천은 사람이며, 성공 핵심은 사람들의 능력과 협력에 달려있다. 따라서 종업원들의 직무만족과 업무몰입을 위해 CEO는 윤리경영을 실천하고자 다각적인 노력을 해야 한다. 경쟁은 물론이고, 고객의 자산을 관리해야하는 증권회사의 경영자도 수없이 많은 윤리적 이슈와 문제에 직면해 있다. 금융환경은 더 복잡해지고 증권사에 대한 요구도 증가하고 있다. 이러한 현실을 고려할 때, 어떻게 윤리 차원의 사회적 요구를 받아들이고 의식 수준을 변화시킬 것인가, 어떻게 기관 내부의 풍토로 정착시켜야 할 것인가 하는 문제는 중요한 관리대상이 되고 있다. 또한 이러한 윤리경영이 조직 구성원의 업무몰입에 어떤 영향을 미칠 것인가를 파악해 볼 필요가 있다. 본 연구는 이러한 연구목적을 바탕으로 증권회사 CEO의 윤리경영의지가 종업원의 심리적 성과변수인 조직몰입에 영향을 미치는 정도를 확인하고자 하였다. 연구를 통해 금융기관장들은 기업윤리 위반의향이 유발되지 않도록 경영제도를 개선하고, 기업윤리 준수의향을 향상시키는 방안을 모색할 필요성이 제기되었다. 또한, 증권회사 CEO는 구성원들의 협력을 유도할 수 있는 참여적 방식에 바탕을 둔 민주적 경영관리와 윤리의 정당성에 초점을 두고 경영방침을 세워야 할 것이다. 아울러 민주적 리더십과 윤리경영을 발휘하기 위한 새로운 도구를 개발하는데 지속적인 노력을 기울여야 할 것이다.
Objective: The purpose of this study was to find out kinematic and kinetic differences the lower extremity joint according to the landing type during vertical jump movement after jump landing, and to present an efficient landing method to reduce the incidence of injury in youth players. Method: Total of 24 Youth players under Korean Sport and Olympic Committee, who used either heel contact landing (HCG) or toe contact landing (TCG) participated in this study (HCG (12): CG height: 168.7 ± 9.7 cm, weight: 60.9 ± 11.6 kg, age: 14.1 ± 0.9 yrs., career: 4.3 ± 2.9 yrs., TCG height: 174.8 ± 4.9 cm, weight: 66.9 ± 9.9 kg, age 13.9 ± 0.8 yrs., career: 4.7 ± 2.0 yrs.). Participants were asked to perform jump landing consecutively followed by vertical jump. A 3-dimensional motion analysis with 19 infrared cameras and 2 force plates was performed in this study. To find out the significance between two landing styles independent t-test was performed and significance level was set at .05. Results: HCG showed a significantly higher dorsi flexion, extension and flexion angle at ankle, knee and hip joints, respectively compared with those of TCG (p<.05). Also, HCG revealed reduced RoM at ankle joint while it showed increased RoM at knee joint compared to TCG (p<.05). In addition, HGC showed greater peak force, a loading rate, and impulse than those of TCG (p<.05). Finally, greater planta flexion moment was revealed in TCG compared to HCG at ankle joint. For the knee joint HCG showed extension and flexion moment in E1 and E2, respectively, while TCG showed opposite results. Conclusion: Compared to toe contact landing, the heel contact landing is not expected to have an advantage in terms of absorbing and dispersing the impact of contact with the ground to the joint. If these movements continuously used, performance may deteriorate, including injuries, so it is believed that education on safe landing methods is needed for young athletes whose musculoskeletal growth is not fully mature.
강도다리, Platichthys stellatus의 난발생과정과 자치어의 형태발달에 관하여 관찰하였다. 수정란은 무색투명한 분리부성란이며, 유구는 없고, 난경은 1.09~1.19 mm (평균 $1.13{\pm}0.03mm$, n=50)였다. 사육 수온 $8.2{\sim}11.2^{\circ}C$에서 수정 후 121시간 만에 부화를 시작하였다. 부화 직 후의 자어는 전장 2.58~2.89 mm (평균 $2.67{\pm}0.09mm$)로 입과 항문은 열려 있지 않으며, 척색은 직선형이고, 근절은 14+27=41개이다. 척색과 소화관 위에는 흑갈색소포와 황갈색소포가 산재해 있고, 막지느러미 가장자리와 눈 및 난황 위에는 색소포가 없다. 부화 후 5일째에는 전장 4.30~4.97 mm (평균 $4.74{\pm}0.21mm$)로 입과 항문이 열려 있으며, 부화 후 10일째 자어는 전장 4.67~5.75 mm (평균 $5.30{\pm}0.31mm$)로 난황이 완전히 흡수되어 후기자어기로 이행하며, 로티퍼의 섭식이 활발해진다. 부화 후 23일째에는 전장 6.69~8.82 mm (평균 $7.85{\pm}0.75mm$)로 오른쪽 눈이 왼쪽으로 이동하기 시작한다. 부화 후 52일째 개체는 전장 10.99~17.06 mm (평균 $13.50{\pm}1.67mm$)로 눈은 머리부분의 왼쪽으로 완전히 이동하여 있으며, D. 64~67: A. 43~46: P. 11: V. 6: C. 19개로 각 지느러미 줄기가 정수에 달하여 치어기로 이행하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.