• The Journal of the Korea Contents Association
• /
• v.15 no.1
• /
• pp.114-122
• /
• 2015

This study has a main purpose on discussing the issue how the construction of film narrative will be changed by audience's desire to intervene into film narrative through the active participation, out of watching a film passively in movie theater. Compared with the collective theatergoing experience in big screen was defined as the past cinematic identity, the absolute value of movie theater fragmented increasingly in the era of media diversification facing with digital media convergence. As this situation can be compared with "the author's death" Roland Barthes predicted on the mono-media of the book, thus, we are to take the time to discuss the new emerging 'movies'. The most important thing in this discussion is the aspect of the transformation of narrative in the future screening. Especially, while 3 act structure and configuration evoking a catharsis in film narrative are elements defining aspect of the past narrative, then, the future narrative in film will change to the structure interacting with audience actively. This paper had a discussion how could be possible the aucience interaction in only movie valuing the passive experientiality uniquely in screening over the other media through investigating the attempts of interactive cinema so far and the possibility of future.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.4
• /
• pp.576-585
• /
• 2016

The current control methods of Y-connected 7 Phase BLDC motor are sine wave current control and square wave control. The sine wave current control method needs dq axis transformation of $7{\times}7$ matrix for current control and very complex. Also this method is not suitable for multi Phase BLDC motor of trapezoidal back emf wave. Therefore, in Y connected multi phase BLDC motor, the square wave current control methods are required. Generally, in the 3Phase BLDC system, Average current control method is used for current control. The average current is obtained that the summation of absolute value of each phase current magnitude is divided by the number of conduction phase. However, if average current control method is applied to multi-phase system, there is a problem that each phase currents are different. This problem affects unbalance of each phase torque and fluctuation of total torque. This paper proposed each phase current control method of Y connected 7Phase BLDC system. Proposed method is used for PI controller of each phase for each phase current control. This method can perfect square wave current control. Also, configuration of the method is easier than DQ axis transformation. Proposed method is verified through simulation and experiments.

• Coupled systems mechanics
• /
• v.3 no.3
• /
• pp.305-318
• /
• 2014

The study deals with the physical modeling of a typical building frame resting on pile foundation and embedded in cohesive soil mass using complete three-dimensional finite element analysis. Two different pile groups comprising four piles ($2{\times}2$) and nine piles ($3{\times}3$) are considered. Further, three different pile diameters along with the various pile spacings are considered. The elements of the superstructure frame and those of the pile foundation are descretized using twenty-node isoparametric continuum elements. The interface between the pile and pile and soil is idealized using sixteen-node isoparametric surface elements. The current study is an improved version of finite element modeling for the soil elements compared to the one reported in the literature (Chore and Ingle 2008). The soil elements are discretized using eight-, nine- and twelve-node continuum elements. Both the elements of superstructure and substructure (i.e., foundation) including soil are assumed to remain in the elastic state at all the time. The interaction analysis is carried out using sub-structure approach in the parametric study. The total stress analysis is carried out considering the immediate behaviour of the soil. The effect of various parameters of the pile foundation such as spacing in a group and number piles in a group, along with pile diameter, is evaluated on the response of superstructure. The response includes the displacement at the top of the frame and bending moment in columns. The soil-structure interaction effect is found to increase displacement in the range of 58 -152% and increase the absolute maximum positive and negative moments in the column in the range of 14-15% and 26-28%, respectively. The effect of the soil- structure interaction is observed to be significant for the configuration of the pile groups and the soil considered in the present study.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.3
• /
• pp.432-438
• /
• 2002

In order to design and analyze the performance of an axial-flow pump it is necessary to know the flow deviation, deflection angle and pressure loss coefficient as a function of the angle of incidence for the hydrofoil section in use. Because such functions are unique to the particular section, however, general correlation formulae are not available for the multitude of hydrofoil profiles, and such functions must be generated by either experiment or numerical simulation for the given or selected hydrofoil section. The purpose of present study is to generate design correlations for hydrofoils with double circular arc (DCA) camber by numerical analysis using a commercial code, FLUENT. The cascade configuration is determined by a combination of the inlet blade angle, blade thickness, camber angle, and cascade solidity, and a total of 90 cascade configurations are analyzed in this study. The inlet Reynolds number based on the chord and the inlet absolute velocity is fixed at 5${\times}$10$\^$5/. Design correlations are formulated, based on the data at the incidence angle of minimum total pressure loss. The correlations obtained in this way show good agreement with the experiment data collected at NASA with DCA hydrofoils.

• YAKHAK HOEJI
• /
• v.46 no.5
• /
• pp.313-319
• /
• 2002

Synthesis of 7$\beta$-[(Z)-2-(2-aminothiazol-4-yl)-2-(1-carboxy-1-methylethoxyimino)acetamido]-3-[[(3S, 5S)-5-[4-phenyl-5-(4-methylphenyl or 2-thiophenyl)-4H-l, 2, 4- triazol-3-yl]thiomethylpyrrolidin-3-yl]]thiomethyl-3-cephem-4-carboxylic acids (7a, 7b) were described. (2S, 4S)-4-acethylthio-2-[4-phenyl-5-(4-methylphenyl or 2-thiophenyl)-4 H-1, 2, 4-triazol-3-yl]thiomethyl-1-tert-butoxycarbonylpyrrolidines (4a, 4b) were prepared from trans-4-hydroxy-L-proline with (2S, 4R)-absolute configuration as starting material. 4-Phenyl-5-(4-methylphenyl or 2-thiophenyl)-4 H-l, 2, 4-triazol-3-thiols (2a, 2b) were prepared from p-toluic anhydride and 2-thiophene carboxylic acid hydrazide, respectively. p-Methoxybenzyl 7$\beta$-(Z)-2-(2-for-mamidothiazol-4-yl)-2-(1-tert-butoxycarbonylisopropylimino]acetamido-3-[[ (3S, 5S)-5-[4-phenyl-5-(4-methylphenyl or 2-thio phenyl)-4H-1, 2, 3-triazol-3-yl]thiomethyl-1- tert-butoxycarbonylpyrrolidin-3-yl]]thiomethyl-3-cephem-4-carboxylates (6a, 6b) were achieved by using p-methoxybenzyl ]7P-(Z)-2-(2-formamidothiazol-4-yl)-2-(tert-butoxycarbonylisopropylimino] acetamido-3-chloromethyl-3-cephem-4-carboxylate (5) and (2S, 4S)-4-acethylthio-2-[4-phenyl-5-(4-methyl phenyl or 2-thiophenyl)-4H-1, 2, 4-triazol-3-yl]thiomethyl-1-tert-butoxycarbonyl pyrrolidines (4a, 4b). Removal of formyl, Boc, and p-methoxybenzyl protecting groups were carried out by triflu oroacetic acid and anisole to give the target compounds.

• Archives of Pharmacal Research
• /
• v.29 no.1
• /
• pp.16-25
• /
• 2006

A novel series of 1-(1-benzofuran-2-yl-ethylidene)-4-substituted thiosemicarbazides (2a-d) along with some derived ring systems: substituted-2,3-dihydro-thiazoles(3a-c, 4a-f) and thiazolidin-4-ones(5a-d and 6a-d), were synthesized. In addition, cyanoacetic acid-(1-benzofuran-2-yl-ethylidene) hydrazide(7) was used to prepare another new series of compounds consisting of substituted pyridin-2(1H)-ones(8a-c); 2-thioxo-2,3-dihydro-thiazoles(9a-d) and 2-thioxo-2,3-dihydro-6H-thiazolo[4,5-d]pyrimidin-7-ones (10a-c, 11a-c). The absolute configuration of compound 5c was determined by X-ray crystallography. The compounds prepared were evaluated for their in vitro anti-HIV, anticancer, antibacterial, and antifungal activities. Among the tested compounds, compounds 5c and 9a produced a significant reduction ㅐ ㄹ the viral cytopathic effect (93.19% and 59.55%) at concentrations $>2.0{\times}10^{-4}\;M\;and\;2.5{\times}10^{-5}\;M$respectively. Compound 9a was confirmed to have moderate anti-HIV activity. Compounds 2a, 2d, and 5c showed mild antifungal activity. However, none of the tested compounds showed any significant anticancer activity.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.12
• /
• pp.1079-1085
• /
• 2010

A steady-state analytical model was presented for a loop heat pipe (LHP) with an evaporator that has a flat geometry. On the basis of a series of reviews of the relevant literature, a sequence of calculations was proposed to predict the temperatures and pressures at each important part of the LHP: the evaporator, liquid reservoir (compensation chamber), liquid line, vapor line, and condenser. The analysis of the evaporator, which is the only part in the LHP that has a capillary structure, was emphasized. Thin-film theory is applied to account for the pressure and temperature in the region adjacent to the liquid-vapor interface in the evaporator. The present study introduced a unique method to estimate the liquid temperature at the interface. Relative freedom was assumed in the configuration of a condenser with a simplified liquid-vapor interface. Our steady-state model was validated by experimental results available in the literature. The relative error was within 3% on the absolute temperature scale, and reasonable agreement was obtained.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.5
• /
• pp.1421-1424
• /
• 2013

Two new isoflavanones, (3R) 5,7,3',4'-tetrahydroxy-2'-methoxyisoflavanone (1) and (3R) 5',8-di-(${\gamma}$,${\gamma}$-dimethylallyl)-2',5-dihydroxyl-4',7-dimethoxyl-isoflavanone (2), were isolated from Uraria clarkei, together with two known compounds dalbergioidin (3), 5,7-dihydroxy-2',4'-dimethoxyisoflavanone (4). The structures involving the absolute configuration of the new compounds were well elucidated by MS, IR, UV, CD, 1D and 2D NMR analyses. Cytotoxicity of the four compounds were assessed, results suggested that compound 2 possessed well cytotoxic activity, against the Hela, K562, and HL60 cell lines with $IC_{50}$ values of 28.0, 40.6 and $35.1{\mu}M$, respectively.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.5
• /
• pp.379-388
• /
• 2019

Recently, a technique for acquiring spatial information data using UAV (Unmanned Aerial Vehicle) has been greatly developed. It is a very crucial issue of the GIS (Geographic Information System) mapping system that passes way point in the unmanned airframe and finally measures the accurate image and stable localization to the desired destination. Though positioning using DGPS (Differential Global Navigation System) or RTK-GPS (Real Time Kinematic-GPS) guarantee highly accurate, they are more expensive than the construction of a single positioning system using a single GPS. In the case of a low-priced single GPS system, the stability of the positioning data deteriorates. Therefore, it is necessary to supplement the uncertainty of the absolute position data of the UAV and to improve the accuracy of the current position data economically in the operating state of the UAV. The aim of this study was to present an algorithm enhancing the stability of position data in a single GPS mode of UAV with multiple GPS. First, the arrangement of multiple GPS receivers through the center of gravity of the UAV were examined. Next, MD (Mahalanobis Distance) is applied to detect instantaneous errors of GPS data in advance and eliminate outliers to increase the accuracy of previously collected multiple GPS data. Processing procedure for multiple GPS reception data by applying the center of the triangular method were presented to improve the position accuracy. Second, UAV navigation systems integrated multiple GPS through configuration of the UAV specifications were implemented. Using the unmanned airframe equipped with multiple GPS receivers, GPS data is measured with the TCM (Triangular Center Method). In addition, UAV equipped with multiple GPS were operated in study area and locational accuracy of multiple GPS of UAV with VRS (Virtual Reference Station) GNSS surveying were compared. The result showed that the error factors are compensated, and the error range are reduced, resulting in the reliability of the corrected value. In conclusion, the result in this paper is expected to realize high-precision position estimation at low cost in UAV using multiple low-cost GPS receivers.

• Computers and Concrete
• /
• v.32 no.2
• /
• pp.149-163
• /
• 2023

One of the main design parameters traditionally utilized in projects of geotechnical engineering is the uniaxial compressive strength. The present paper employed three artificial intelligence methods, i.e., the stochastic fractal search (SFS), the multi-verse optimization (MVO), and the vortex search algorithm (VSA), in order to determine the compressive strength of concrete (CSC). For the same reason, 1030 concrete specimens were subjected to compressive strength tests. According to the obtained laboratory results, the fly ash, cement, water, slag, coarse aggregates, fine aggregates, and SP were subjected to tests as the input parameters of the model in order to decide the optimum input configuration for the estimation of the compressive strength. The performance was evaluated by employing three criteria, i.e., the root mean square error (RMSE), mean absolute error (MAE), and the determination coefficient (R²). The evaluation of the error criteria and the determination coefficient obtained from the above three techniques indicates that the SFS-MLP technique outperformed the MVO-MLP and VSA-MLP methods. The developed artificial neural network models exhibit higher amounts of errors and lower correlation coefficients in comparison with other models. Nonetheless, the use of the stochastic fractal search algorithm has resulted in considerable enhancement in precision and accuracy of the evaluations conducted through the artificial neural network and has enhanced its performance. According to the results, the utilized SFS-MLP technique showed a better performance in the estimation of the compressive strength of concrete (R²=0.99932 and 0.99942, and RMSE=0.32611 and 0.24922). The novelty of our study is the use of a large dataset composed of 1030 entries and optimization of the learning scheme of the neural prediction model via a data distribution of a 20:80 testing-to-training ratio.