• Earthquakes and Structures
• /
• v.20 no.4
• /
• pp.417-430
• /
• 2021

Due to functional requirements, SRC column-RC beam abnormal joints with characteristics of strong beam weak column, variable column section, unequal beam height and staggered height exist in the Steel reinforced concrete (SRC) frame-bent main building structure of thermal power plant (TPP). This paper presents the experimental results of these abnormal joints through cyclic loading tests on five specimens with scaling factor of 1/5. The staggered height and whether adding H-shaped steel in beam or not were changing parameters of specimens. The failure patterns, bearing capacity, energy dissipation and ductile performance were analyzed. In addition, the stress mechanism of the abnormal joint was discussed based on the diagonal strut model. The research results showed that the abnormal exterior joints occurred shear failure and column end hinge flexural failure; reducing beam height through adding H-shaped steel in the beam of abnormal exterior joint could improve the crack resistance and ductility; the abnormal interior joints with different staggered heights occurred column ends flexural failure; the joint with larger staggered height had the higher bearing capacity and stiffness, but lower ductility. The concrete compression strut mechanism is still applicable to the abnormal joints in TPP, but it is affected by the abnormal characteristics.

• Imaging Science in Dentistry
• /
• v.31 no.4
• /
• pp.193-197
• /
• 2001

Purpose : To determine whether there is a relationship between abnormal temporomandibular joint radiographic findings and age or gender in a sample of preorthodontic patients. Materials and Methods : Individualized corrected sagittal tomographs of 188 temporomandibular joints in 94 preorthodontic patients, aged 11 to 29 years, were taken and viewed by an observer blinded to clinical records. The study population was divided into 2 aged groups (11-15 years and 16-29 years) for comparative purposes. Temporomandibular joint radiographic findings were classified as normal or abnormal. Results: There was no difference in ratio of abnormal to normal findings between the both aged groups. The frequency of osseous abnormalities was similar with that of abnormalities of condylar position. Abnormalities in CP and JS were most frequent in all aged groups. Conclusion : There is no significant difference between ages or genders for temporomandibular joint radiographic abnormalities.

• Steel and Composite Structures
• /
• v.18 no.5
• /
• pp.1177-1195
• /
• 2015

Six specimens are tested to investigate the cyclic behavior of beam-to-column abnormal joints in steel moment-resisting frames, which are designed according to the principle of strong-member and weak-panel zone. Key parameters include the axial compression ratio of column and the section depth ratio of beams. Experimental results indicate that four types of failure patterns occurred during the loading process. The $P-{\Delta}$ hysteretic loops are stable and plentiful, but have different changing tendency at the positive and negative direction in the later of loading process due to mechanical behaviors of specimens. The ultimate strength tends to increase with the decrease of the section depth ratio of beams, but it is not apparent relationship to the axial compression ratio of column, which is less than 0.5. The top panel zone has good deformation capacity and the shear rotation can reach to 0.04 rad. The top panel zone and the bottom panel zone don't work as a whole. Based on the experimental results, the equation for shear strength of the abnormal joint panel zone is established by considering the restriction of the bottom panel zone to the top panel zone, which is suitable for the abnormal joint of H-shaped or box column and beams with different depths.

• Journal of Oral Medicine and Pain
• /
• v.44 no.4
• /
• pp.189-194
• /
• 2019

Perforation of articular disc of temporomandibular joint is a unusual condition and diagnosed through magnetic resonance imaging (MRI), arthrography or arthroscopic surgery. We attempted to investigate the suspicious findings of articular disc perforation through examination commonly used in temporomandibular disorder (TMD) patients. We retrospectively analyzed the clinical and imaging findings of five TMD patients whose articular discs were perforated based on MRI. The most meaningful finding was the abnormal width of the joint space in cone-beam computed tomography. Thus, the clinician should perform a thorough assessment of the joint space in TMD patients and conduct additional investigation to determine what caused the abnormal joint space.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.10 no.1
• /
• pp.47-55
• /
• 1980

The author analysed the routine radiographic changes and clinical symptoms of 205 cases of temporomandibular joint arthrosis. The clinical symptoms of the patients were classified and the morphological ylar head, articular eminence, and articular fossa were analized and discussed view point. The positional changes of condylar head and articular fossa relatation in TMJ arthrosis were observed. The frequencies of coincidence between the site of complaints and the site of the abnormal images which could be detected were examined. The results were obtained as follows; 1. Bone erosion, deformity, marginal proliferation and sclerosis were selected from many abnormal images as the radiographic diagnostic criteria of TMJ arthrotic lesions. 2. Abnormal radiographic findings were revealed in 150 cases (73.9%) of 205 total TMJ arthrosis cases and site with abnormal findings coincided with the site of complaints in 106 cases (70.7%) of 150 cases and coincidence rates were higher above fourth decades than below third decades. 3. Sclerosis of the abnormal radiographic findings could be found more often below third decades than above fourth decades. 4. The positional changes of condylar head were revealed in 176 cases (85.9%) of 205 total cases. 5. Pain complaints were revealed in 170 cases(82.9%) and clicking sounds were revealed in 120 cases (58.6%) of clinical symptoms of TMJ arthrosis. 6. No tendency was found so far the differential diagnosis between pain dysfunction syndrom and osteoarthrosis of TMJ.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.4
• /
• pp.330-335
• /
• 2002

The study was performed to investigate the comparison of relative signal intensity of normal- and abnormal-side retrodiscal tissue, and relationship between clinical examination, joint effusion and relative signal intensity of retrodiscal tissue in patients with unilateral TMJ internal derangement. The study group comprised 19 females and 9 males, with a mean age of 29 years. After measurements of the signal intensity were made on the MR imager for the T2 weighted images on retrodiscal tissue and brain gray matter, we calculated relative value and tried to find relationship between clinical examination, joint effusion and relative signal intensity on normal- and abnormal-side. The results are as follows. 1. The gray matter is an appropriate reference point. 2. The relative signal intensity is high significantly in abnormal-side retrodiscal tissue compared with normal-side retrodiscal tissue. 3. The relative signal intensity is high significantly in painful joints compared with nonpainful joints and in joints with joint effusion compared with joints without joint effusion. 4. The relative signal intensity in normal joints, joints with reduction and joints without reduction is increased in order significantly.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.53 no.1
• /
• pp.1-6
• /
• 2004

In this paper, we present the new method for joint aspect inspecting system. We use the image processing and laser maker for light source. We can find the matrial joint status through processing the line pattern which is made by laser maker. To get the line pattern, in first, we did the preprocess of threshold. If the shape of line had over two segments, then the joint status is abnormal. We show our system efficency by experiment on tire facility.

• Journal of the Korean Ceramic Society
• /
• v.35 no.2
• /
• pp.163-171
• /
• 1998

Continuously contacting with camshaft the face of Valve Lifter made of cast iron brings about abnormal wear such as unfairwear or earlywear because it is heavily loaded in the valve train systems as the engine gets more powered. This abnormal wear becomes a defet namely over-clearance when the valve is lifting so that the fuel gas imperfectly combusted by unsuitable open or close aaction of the engine valve in the combustion chamber. The imperfect combustion in the end results in the major cause of air pollution and combustion chamber. The imperfectly combusted by unsuitable open or close action of the engine valve in the combustion chamber. The imperfect combustion in the end results in the major causes of air pollution and decrease of the engine output. Consequently to prevent this wear this study was to develop the valve lifter which is joined by brazing process with SCM435H and a tip by manufacturing the face as a superhardened which is joined by brazing process with SCM435H and a tip by manufacturing the face as a superhardened ceramics alloy which has high wear resistance. Having the excellent surface hardness with Hv1100-1200 the sintered body developed with superhardened alloy(WC) can endure the severe face loading in the valve train system. We experienced with various brazing alloys and obtained the excellent joining strength to the joint had 150MPa shear strength. Interface analysis and microstructure in a joint were examined through SEM & EDS Optical microscope. Also 2,500 hours high speed(3,000-4,000 rpm) and continuous (1step 12hr) engine dynamo testing was carried out to casting valve liter and ceramics-metal joint valve lifter so that the abnormal wears were compared and evaluated.

• Journal of Korean Foot and Ankle Society
• /
• v.16 no.3
• /
• pp.141-147
• /
• 2012

A tarsal coalition is an abnormal union between 2 or more tarsal bones of the hind- and midfoot, which can be congenital or acquired. The documented overall incidence of tarsal coalition is 1% or less. The resulting abnormal articulation leads to accelerated degeneration within adjacent joint. Pain is often diffuse, exacerbated by strenuous activity or following an ankle sprain. The findings on physical examination is protruded mass, diminished range of motion of the involved joint. It is possible to identify of tarsal coalitions with conventional radiography, but CT scanning necessary to evaluate of the size, location, characteristic and preoperative planning of tarsal coalitions. The initial treatment for a tarsal coalition is conservative, but tarsal coalitions unresponsive to conservative treatment, are managed by coalition resection, or arthrodesis in case of presence of degenerative changes.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.922-927
• /
• 2007

The present urban maglev which has been developed in Korea is controlled by 4-edge control method over each bogie. The control output which is derived from two gap sensors and one vertical acceleration sensor controls magnet to maintain a nominal gap. But, the gap signal acts as a big disturbance in rail joint though two gap sensors are used and finally result in unstable response and poor ride comfort. This paper treats of a method to compensate the gap signal in rail joint for the levitation control of urban maglev. The physically abnormal change of gap is detected when one gap sensor passes a rail joint, the disturbance of gap in rail joint is estimated. Finally the disturbance in gap signal is eliminated by processing the information of vehicle speed and estimated disturbance in when the other gap sensor passes a rail joint.