• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.469-472
• /
• 2003

The nematic liquid crystal (NLC) aligning capabilities using a-C:H thin film deposited at the three kinds of rf bias condition were investigated. A high pretilt angle of about $11^{\circ}$ by the ion beam alignment method was observed on the a-C:H thin film (polymer-like carbon) deposited at 1W rf bias condition, and the low pretilt angle of the NLC was observed on the a-C:H thin film(diamond-like carbon) deposited at rf 30W and 60W bias condition. Consequently, the high NLC pretilt angle and the good aligning capabilities of LC alignment by the IB alignment method on the a-C:H thin film deposited at 1W rf bisa condition can be achieved.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.124-127
• /
• 2002

LC aligning capabilities and the variation of pretilt angles with ion beam irradiation on the a-C:H thin films, and electro-optical (EO) performances of the ion beam aligned twisted nematic (TN)-liquid crystal display (LCD) with oblique ion beam exposure on the a-C:H thin film were studied. A high pretilt angle of $3.5{^{\circ}}$ via ion beam irradiation on the a-C:H thin film was measured. Also, the LC pretilt angle decreased due to the increase in surface roughness at over 2 min of IB exposure time. It is considered that this roughness increase due to increasing IB exposure time that generated destroy of oriented rings of atoms related to LC alignment. An excellent voltage-transmittance (V-T) curve of the ion beam aligned TN-LCD was observed with oblique ion beam exposure on the a-C:H thin film for 1 min. Also, a faster response time for the ion beam aligned TN-LCD with oblique ion beam exposure on the a-C:H thin film for 1 min can be achieved. Finally, the residual DC property of the ion beam aligned TN-LCD with ion beam exposure of 1 min on the a-C:H thin film is almost same as that of the rubbing aligned TN-LCD on a PI surface.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.10
• /
• pp.1100-1106
• /
• 2004

In this paper, we intend to make fringe-field switching (FFS) mode cell by the ion beam (IB) alignment method on the a-C：H thin film, to analyze electro-optical characteristics in this cell. We studied on the suitable inorganic thin film for fringe-field switching (FFS) cell and the aligning capabilities of nematic liquid crystal (NLC) using the alignment material of a-C：H thin film as working gas at 30 W rf bias condition. A high pretilt angle of about 5 $^{\circ}C$ by ion beam (IB) exposure on the a-C：H thin film surface was measured. Consequently, the high pretilt angle and the good thermal stability of LC alignment by the IB alignment method on the a-C：H thin film surface as working gas at 30 W rf bias condition can be achieved. An excellent voltage-transmittance (V -T) and response time curve of the IE-aligned FFS-LCD was observed with oblique IB exposure on the a-C：H thin films. Also, AC V-T hysteresis characteristics of the IB-aligned FFS-LCD with IE exposure on the a-C：H thin films is almost the same as that of the rubbing-aligned FFS cell on a polyimide (PI) surface.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.7
• /
• pp.2067-2072
• /
• 2013

Hydrogen ($H_2$) treatment using a two-step $TiO_2$ nanotube (TONT) film was performed under various annealing temperatures from $350^{\circ}C$ to $550^{\circ}C$ and significantly influenced the extent of hydrogen treatment in the film. Compared with pure TONT films, the hydrogen-treated TONT (H:TONT) film showed substantial improvement of material features from structural, optical and electronic aspects. In particular, the extent of enhancement was remarkable with increasing annealing temperature. Light absorption by the H:TONT film extended toward the visible region, which was attributable to the formation of sub-band-gap states between the conduction and valence bands, resulting from oxygen vacancies due to the $H_2$ treatment. This increased donor concentration about 1.5 times higher and improved electrical conductivity of the TONT films. Based on these analyses and results, photoelectrochemical (PEC) performance was evaluated and showed that the H:TONT film prepared at $550^{\circ}C$ exhibited optimal PEC performance. Approximately twice higher photocurrent density of 0.967 $mA/cm^2$ at 0.32 V vs. NHE was achieved for the H:TONT film ($550^{\circ}C$) versus 0.43 $mA/cm^2$ for the pure TONT film. Moreover, the solar-to-hydrogen efficiency (STH, ${\eta}$) of the H:TONT film was 0.95%, whereas a 0.52% STH efficiency was acquired for the TONT film. These results demonstrate that hydrogen treatment of TONT film is a simple and effective tool to enhance PEC performance with modifying the properties of the original material.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1211-1214
• /
• 2003

The film is prepared by electron cyclotron resonance chemical vapor deposition (ECRCVD) employing CH$_4$ and H$_2$ gases. It is deposited by the control of microwave plasma power, gas flow ratio, deposition pressure, and In-situ thermal treatment temperature. The structure of a-C:H (hydrogenated amorphous carbon) thin film is analysed by FT-IR spectroscopy. The fraction sp$^3$ versus sp$^2$ bonding is very important to clear up the surface and interrace of a-C:H film properties such as nano-scale friction behavior. The sp$^3$ versus sp$^2$ bonding of a-C:H thin film is dependent on the deposition conditions, therefore. nano-scale friction behavior is dependent on the deposition conditions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1132-1136
• /
• 2004

In this paper, we intend to make FFS mode cell with LC alignment used non-rubbing method, ion beam alignment method on the a-C:H thin film, to analyze electro-optical characteristics in this cell. We studied on the suitable inorganic thin film for FFS-LCD and the aligning capabilities of nematic liquid crystal (NLC) using the new alignment material of a-C:H thin film as working gas at rf bias condition. A high pretilt angle of about 5$^{\circ}$ by ion beam(IB) exposure on the a-C:H thin film surface was measured. An excellent voltage-transmittance (V-T) and response time curve of the ion-beam-aligned FFS-LCD was observed with oblique ion beam exposure on the DLC thin films.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.460-463
• /
• 2005

We studied the nematic liquid crystal (NLC) alignment capability by the Ultraviolet (UV) alignment method on a a-C:H thin -film , and investigated electro-optical performances of the UV aligned twisted nematic (TN)- liquid crystal display (LCD) with the UV exposure on a-C:H thin film surface. A good LC alignment by UV irradiation on a a-C:H thin -film surface was achieved. Monodomain alignment of the UV aligned TN-LCD can be observed. The good electro-optical (EO)characteristics of the UV aligned TN-LCD was observed with oblique UV exposure on the a-C:H thin film surface for 1min.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.500-503
• /
• 2003

We studied the nematic liquid crystal (NLC) aligning capabilities by the UV alignment method on a a-C:H thin film surface. A good LC alignment by UV exposure on the a-C.H thin film surface at 200 ${\AA}$ of layer thickness was achieved. Also, a good LC alignment by the UV alignment method on the a-C:H thin film surface was observed at annealing temperature of 180 $^{\circ}C$. However, the alignment defect of the NLC was observed above annealing temperature of 200 $^{\circ}C$. Consequently, the good thermal stability of LC alignment by the UV alignment method on the a-C:H thin film surface can be achieved.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.6
• /
• pp.262-266
• /
• 2010

The Calcium-aluminate electride thin films on the quartz substrates was coated by sol-gel process. The crystallization of the C12A7 thin film was observed at $800^{\circ}C$ and high density C12A7 thin film was achieved on heat treatment at $1,200^{\circ}C$ for 1 hour. The reduction heat treatment of C12A7 thin film could be converted from insulator to conductor and the electrical conductivity was 120 S/cm in the C12A7 thin film heat treated at $1,200^{\circ}C$ with $H_2$ gas for 48 hours.

• Journal of the Korean institute of surface engineering
• /
• v.26 no.1
• /
• pp.11-21
• /
• 1993

The relationship between the amount of deposited-Zn and the adhesion of Zn film has beend investigated. This study changed the mild steel substrate temperature range of $100^{\circ}C$~$250^{\circ}C$, with the aim of studying the adhesion of Zn film coated by PVD on substrates in 10-2~10-3torr and deoxidant gas atmospheres 50%H2~50%N2 and 75%H2+25%N2. The result revealed that the adhesion of Zn film was remarkably good in a 75% H2+25%N2 gas atmosphere as well as deoxidant time was short, and with increasing the substrate tempera-ture up to $250^{\circ}C$. Whiled the amount of deposition tended to increase linearly with time at constant evaporation temperature. It was almost constant when the substrate temperature was lower than $200^{\circ}C$, slightly decreased between $200^{\circ}C$ and $250^{\circ}C$ and significantly decreased at $300^{\circ}C$.