• Journal of Information Display
• /
• 제3권2호
• /
• pp.13-18
• /
• 2002

Numerical simulation is one of the most useful tools to study gas discharge phenomena that occur in alternating current plasma display panel (AC-PDP) cell. Most PDP cell simulations have been performed for two-dimensional cell, is cross-section along the address electrode. We developed a three-dimensional PDP simulator and applied it to a T-shaped electrode cell in order to show the effects of sustain electrode shape that cannot be included in two-dimensional simulation. The dependence of power consumption on electrode shape and area in the simulation showed the same trend as experiment.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 가을 학술발표회 논문집
• /
• pp.245-252
• /
• 2001

The ultimate strength testing of a two-story, single-bay, and sway allowed space steel frame was performed. Considering a majority of large-scale frame tests in the past, only two-dimensional frames were experimentally studied. Therefore, three-dimensional experiment is needed to extend the knowledge of this field. The steel frame subjected to non-proportional vertical and horizontal load was tested. The load-displacement curve of the test frame is provided. The experiment results are useful for verification of the three-dimensional numerical analysis. The results obtained from 3D non-linear analysis using ABAQUS were compared with experimental data.

• 방사선산업학회지
• /
• 제2권3호
• /
• pp.135-140
• /
• 2008

A field tracer experiment using radioisotope was carried out to investigate the characteristics of a pollutant transport and a determination of the dispersion coefficients in a river system. The dispersion coefficients in the longitudinal and transverse directions were determined by using the measured concentration of a radioisotope. The two-dimensional numerical models were applied to calculate the flow and concentration fields at the experimental site. Several numerical simulations were performed to investigate the effects of the numerical results according to variations of the dispersion coefficients. The calculated concentrations agreed well with the measured ones.

• 대한기계학회논문집B
• /
• 제27권5호
• /
• pp.628-634
• /
• 2003

We present numerical and experimental results of periodic flows inside a rectangular container under a background rotation. The periodic flows are generated by changing the speed of rotation periodically so that a time-periodic body forces produce the unsteady flows. In numerical computation, a parallel-computation technique with MPI is implemented. Flow visualization and PIV measurement are also performed to obtain velocity fields at the free surface. Through a series of numerical and experimental works, we aim to clarify, if any, the fundamental reasons \ulcornerf discrepancy between the two-dimensional computation and the experimental measurement, which was detected in the previous study for the same flow model. Specifically, we check if the various assumptions prerequisite for the validity of the classical Ekman pumping law are satisfied for periodic flows under a background rotation.

• 한국해안·해양공학회논문집
• /
• 제24권1호
• /
• pp.48-57
• /
• 2012

본 연구에서는 고립파를 저감시키기 위한 저감공으로 본문 중에서 제시하는 공진장치를 직선배치된 기존의 방파제와 직사각형항만의 입구부에 각각 부착하고, 이에 따른 고립파의 제어능을 검토하기 위해 3차원수리모형 실험 및 3차원수치해석을 수행하였다. 수치해석에서는 3차원수치파동수조를 이용하는 3차원혼상류해석법의 TWOPM-3D를 적용하였고, 얻어진 수치해석결과와 수리실험결과를 비교 분석하여 본 수치해석법의 타당성을 검증하였다. 또한, 공진장치가 부착되지 않은 경우와 대비 고찰하여 고립파의 제어에 대한 공진장치의 제어능을 다각도로 검토한 결과, 그의 유효성을 충분히 확인할 수 있었다.

• 한국습지학회지
• /
• 제15권1호
• /
• pp.91-103
• /
• 2013

본 연구에서는 자연친화적인 호안 블록의 현장 적용시 충분한 기술적인 검증과 구조적, 수리학적 안정성 검토 등이 제대로 이루어지지 않고 있는 문제점을 개선하기 위해 생태적 기능을 확보할 수 있는 식생강화를 위한 다공성 소일 블록에 대하여 수리적 거동 변화에 따른 수리학적 안정성을 검토하였다. 대상구간을 선정하여 수치해석 및 수리모형실험을 실시하였으며 수치해석을 위해 1차원 수치해석모형인 HEC-RAS와 2차원 수치해석모형인 RMA-2를 이용하여 1, 2차원 수치해석을 실시하였고, Froude 상사법칙을 적용하여 식생 유, 무에 따른 축척된 수리모형실험을 실시하였다. 수리모형실험의 경우 실험결과에 대한 타당성을 위해 축척된 수리모형실험의 유속 및 소류력 결과를 원형으로 환산하여 1, 2차원 수치해석결과와 동일한 조건하에 비교 검토하였고 그 결과 비교적 일치된 결과가 나타난 것으로 확인되었으며 이에 따른 원형으로 환산된 소류력 결과를 기존 연구결과인 호안의 허용소류력과 비교함으로써 블록의 수리학적 안정성을 제시하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1716-1720
• /
• 2000

To develop the code of predicting flow-field and aeroacoustic noise by a electrical cable, a combined CFD-acoustic analogy approach is selected. The two-dimensional, unsteady, incompressible Reynolds-Averaged Navier-Stokes solver with a ${\kappa}{\omega}$, ${\kappa}{\omega}$ SST turbulence modeling is used to calculate the near-field around electrical cable. Near-field results are then coupled with two-dimensional Curle's integral formulation based upon Lighthill's acoustic analogy with an assumption of acoustic compactness. To validate this code, numerical results are compared with experimental data for a circular cylinder. The simulation shows an overprediction on acoustic amplitudes, but overally speaking, the spectrum pattern of sound pressure agrees well with experiment in an acceptable amount of error. In addition, various cross sections of a cable were selected and compared with each other in terms of drag and radiated noise.

• The Journal of the Acoustical Society of Korea
• /
• 제20권4E호
• /
• pp.17-23
• /
• 2001

To develop the code of predicting flow-field and aeroacoustic noise by an electrical cable, a combined CFD-Acoustic analogy approach is selected. The two dimensional, unsteady and incompressible Reynolds-averaged Navier-Stokes solver with κ-ω and κ-ω SST turbulence modeling is used to calculate the near flow-field around an electric cable. Near-field results are then coupled with two-dimensional Curle's integral formulation based upon Lighthill's acoustic analogy with the assumption of acoustic compactness. To validate this code, numerical results are compared with experimental data for a circular cylinder. The simulation shows an overprediction on acoustic amplitudes, but overally speaking, the spectrum pattern of sound pressure agrees well with experiment within an acceptable amount of error. In addition, a few cross-sections of the cable were selected and tested with each other in terms of drag and radiated noise

• 한국자동차공학회논문집
• /
• 제10권4호
• /
• pp.223-233
• /
• 2002

The air distribution duct with multiple outlets is an essential part of automotive air-conditioning system In a bus. The estimation of airflow rate in an automotive air-conditioning duct is typically very complicate due to large variations in cross-sectional area and abrupt changes in flow direction, as well as unbalanced distribution of the flow. In this paper, the flow characteristic in a duct with multiple outlets is investigated through experiment, CFD simulation and a one-dimensional simulation. Numerical simulations have been performed for two simplified air conditioning ducts with multiple outlets used in a medium bus. The three dimensional Navier-Stokes code was used to evaluate the overall pressure, velocity Held, and distribution rate at each diffuser according to the change of various design parameters such as ratio of cross-sectional area and radius of bifurcated region. In addition, a one-dimensional program based on Bernoulli equation was developed to obtain optimized diffuser area required to equalize discharge flow rate at each outlet. As a result of this study, optimized diffuser area of design variable by one-dimensional program was very reasonable as compared to the trend deduced from CFD Simulation. Therefore, the simple and convenient one-dimensional analysis developed in this study can be applied in practical design procedure for air-conditioning duct.

• 한국환경과학회지
• /
• 제5권6호
• /
• pp.727-738
• /
• 1996

An one dimensional atmosphere-canopy-soil interaction model is developed to estimate of the heat budget parameter in the atmospheric boundary layer. The canopy model is composed of the three balance equations of energy, temperature, moisture at ground surface and canopy layer with three independent variables of Tf(foliage temperature), Tg(ground temperature), and qg(ground specific humidity). The model was verilied by comparative study with OSUID(Oregon State University One Dimensional Model) proved in HAPEX-MOBILHY experiment. Also we applied this model in two dimensional land-sea breeze circulation. According to the results of this study, surface characteristics considering canopy acted importantly upon the simulation of meso-scale circulation. The factors which used in the numerical experiment are as follows ; the change for a sort of soil(sand and peat), the change for shielding factor, and the change for a kind of vegetation.