• ETRI Journal
• /
• v.36 no.6
• /
• pp.1016-1022
• /
• 2014

This paper presents a hybrid model solution for user motion recognition. The use of a single classifier in motion recognition models does not guarantee a high recognition rate. To enhance the motion recognition rate, a hybrid model consisting of decision trees and artificial neural networks is proposed. We define six user motions commonly performed in an indoor environment. To demonstrate the performance of the proposed model, we conduct a real field test with ten subjects (five males and five females). Experimental results show that the proposed model provides a more accurate recognition rate compared to that of other single classifiers.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.3
• /
• pp.56-62
• /
• 1996

This paper presented a new measuring system to improve circular motion accuracy by using two-dimensonal probe and master ring for NC machine tools. This measuring system reduced the circular motion error conspicuously by eliminating the influence of the acceleration/deceleration range and compensating the friction force whose influences were significant while measuring the motion. Experimental results show that this system had enough accuracy to measure a circular motion for NC machine tools, compared with the circular test method and the r .theta. method.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.631-636
• /
• 2004

The sway motion control problem of a container hanging on the trolly is considered in the paper. In the container crane control problem, suppressing the residual swing motion of the container at the end of acceleration, deceleration or the case of that the unexpected disturbance input exists is main issue. For this problem, in general, many trolley motion control strategies are introduced and applied. In this paper, we introduce and synthesize a swing motion control system in which a small auxiliary mass is installed on the spreader made by ourselves. In this control system, the actuator reacting against the auxiliary mass applies inertial control forces to the container to reduce the swing motion in the desired manner. Especially, we apply the $H_{\infty}$ based gain-scheduling control technique the anti-sway control system design problem of the controlled plant. In this control system, the controller dynamics are adjusted in real-time according to time-varying plant parameters. And the experiment result shows that the proposed control strategy is shown to be useful to the case of time-varying system and, robust to disturbances like winds and initial sway motion.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.2
• /
• pp.55-61
• /
• 2013

For years, many studies have mainly been investigated in a complicated human motion analysis. Recently, many motion analysis equipments have been studied and developed. Therefore, the more complex human movement analyses are possible, we have enabled us to perform more and more complicated human movement analyses. A Three-dimensional(3D) motion analysis on of the several methods is a useful tool for analyzing the human motion analysis. The purpose of this study was to develop the 3D human motion analysis using a kalman filter algorithm and a gyro sensor. The algorithm and sensor were used to human motion analysis with high-speed motion capture. In this study, the developed system will be adapted to facilitate golf swing analysis. Using the developed system, golfers and coaches who do not have advanced biomechanical knowledge can easily be used to their golf swing analysis. Future study is necessary for more practical and efficient area such as other sports industries, 3D game industries, rehabilitation training, etc..

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.691-694
• /
• 2000

In this paper, a motion control algorithm is proposed by using neural network system, which makes a robot arm successfully avoid unexpected obstacle when the robot is moving from the start to the goal position. During the motion, if there is an obstacle the vision system recognizes it. And in every time the optimization-algorithm quickly chooses a motion among the possible motions of robot. The proposed algorithm has a good avoidance characteristic in simulation.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1735-1736
• /
• 2008

In this research, a riding robot system named as "RideBot" is developed for health-care and entertainments. The developed riding robot can follow the intention of horseman and can simulate the motion of horse. The riding robot mechanisms are used for many functions of attitude detection, motion sensing, recognition, common interface and motion-generations. This riding robot can react on health conditions, bio-signals and intention informations of user. One of the objectives of this research is that the riding robot could catch user motion and operate spontaneous movements. In this paper, we develope the saddle mechanism which can generate 3 degrees-of-freedom riding motion based on the intention of horseman. Also, we develope reins and spur mechanism for the recognition of the horseman's intention estimation and the bio-signal monitoring system for the health care function of a horseman. In order to evaluate the performance of the riding robot system, we tested several riding motions including slow and normal step motion, left and right turn motion.

• Journal of the Korean Society of Industry Convergence
• /
• v.18 no.2
• /
• pp.119-128
• /
• 2015

In this paper, we propose a new motion control technology to design robust control system of industrial robot. The system modeling of robotic manipulation tasks with constraints is presented, and the control architecture for unconstrained and constrained motion system with parametric uncertainties is synthesized. The optimal reference of robot manipulator is generated by the reference controller as a discrete state system and the control behavior of constrained system which has poor modeling information and time-invariant constraint function is improved motion control system is successfully evaluated by experiment to the desired tasks.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.11
• /
• pp.1064-1069
• /
• 2015

Control Moment Gyro (CMG) has been used as an indirect actuator of a single-wheel robot system GYROBO, developed at Chungnam National University. The flip motion of the gimbal system produces the gyroscopic motion onto the body system while the body motion also produces the gyroscopic motion onto the gimbal system inversely. In this paper, the intuitive equation of the inverse gyroscopic effect is derived as the direct relation between the rate of the body system and the rate of the gimbal system. Experiments on the inverse gyroscopic effect under the chaotically generated disturbance are conducted. Experimental data are approximated by a linear equation using the least square method.

• Journal of Korean Neurosurgical Society
• /
• v.46 no.5
• /
• pp.431-436
• /
• 2009

Objective : This study examines whether functional motion is present at one or more years after Bioflex System placement. BioFlex System is a flexible rod system which has been used to preserve motion at the area of implantation. There has not been a scientific study showing how much motion is preserved after implantation. Methods : A total of 12 consecutive patients underwent posterior dynamic stabilization using the BioFlex System. Six patients were treated using a L3-4-5 construct and other six patients using a L4-5-S1 construct. Follow-up ranged from 12 to 33 months and standing neutral lateral, extension, flexion and posteroanterior (PA) radiographs were obtained at 3, 6, 9, and 12 months and at more than 12 months postoperatively. Range of motion (ROM), whole lumbar lordosis, and ROMs of motion segments from L2 to S1 were determined. Results : Patients with a L3-4-5 construct demonstrated a decrease in mean ROM for whole lumbar decreased from 40.08 to 30.77. Mean ROM for L3-4 (6.12 to 2.20) and L4-5 (6.55 to 1.67) also decreased after one year. Patients with a L4-5-S1 construct demonstrated L4-5 (8.75 to 2.70) and L5-S1 (9.97 to 3.25) decrease of mean ROM at one year postoperatively. Lumbar lordosis was preservep at both L3-4-5 and L4-5-S1 constructs. Clinical results showed significant improvements in both study groups. Conclusion : The present study provides preliminary information regarding the BioFlex motion preservation system. We conclude that the BioFlex System preserves functional motion to some degree at instrumented levels. However, although total lumbar lordosis was preserved, ROMs at implantation segments were lower than preoperative values.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1481-1484
• /
• 1997

The vehicle driving simulator expects vehicle motion with real-time simulation arise from driver's steering, accelerating, stopping and simulates motion of vehicl with visula, audio and washout algorithm. And it gives a vivid feeling to driver in reality. Vehicle driving simulator with vehicle integration control system is used for analysis of analysis of vehicle controllaility, steering capacity and safety in various pseudo environment alike. basides, it analyzeds vehicle safety factor dirver's reaction and promotes traffic safety without driver's own risks. The main proceduress of development of the vehicle driving simulator are classified by 3 parts. first the motion base system which can be generated by the motion queues, should be developed. Secondly, real-time vehicle software which can afford the vehicle dynamics, might be constructed. The third procedure is the integration of vehicle driing simulator which can be interconnected between visual systems with motion base. In this study, we are to study of the motion base for a vehicle driving simulator design and that of its real time control and using an extra gyro sensor and accelerometers to find a position and an orientatiion of the moving platform except for calculating forward kinematics. To drive the motion base, we use National Instruments corp's Labview software. Furthemore, we use analysis module for the vehicle motionand the washout algorithm module to consummate driving simulator, which can be driven by human in reality, so we are doing experimentally process about various vehicle motion conditon.