• Food Science of Animal Resources
• /
• v.35 no.4
• /
• pp.524-532
• /
• 2015

The objective of this study was to investigate the effects of high post-mortem temperature application on development of pale, soft, exudative (PSE) turkey meat characteristics in terms of local slaughter conditions. Within this scope, it was targeted to obtain PSE-like muscles benefiting from different post-mortem temperature applications. Immediately after slaughter, turkey Pectoralis major (n=15) muscles were kept at various post-mortem temperatures (0, 10, 20, 30, and 40℃) for 5 h. pH values of 40°C treatment were lower than four other treatments (p<0.05). L* values, drip loss, cook loss, and thawing loss of 40℃ group were higher than the other groups (p< 0.05). Napole yield of 40℃ treatment indicated that high post-mortem temperature decreases brine uptake. Protein solubility of 40℃ group was lower than 0℃ group (p<0.05). Expressible moisture did not differ between 0 and 40℃ treatments. Hardness, gumminess and chewiness of 40℃ treatment were higher than 0℃ treatment. The results of this research showed that high post-mortem temperature treatment induced development of PSE-like turkey meat, with lower pH, paler color, higher technological and storage losses, and reduced protein solubility and texture.

• Journal of the Korean Home Economics Association
• /
• v.23 no.4
• /
• pp.33-54
• /
• 1985

The purpose of this study is to establish the suitable wearing standard under environmental thermal conditions in Pusan. The data is obtained from 50 girl students from April, 1984 to March, 1985. Items of the research are as follows : Environmental conditioni, clothing weight, contents of wearing, clothing climate, wearing order etc. RESULTS : 1. The upper clothing wights are varied considerably with temperature, while the lower are not. 2. The outdoor temperature and the total clothing weights show the high negative correlation of r=-.97 wth regression equation of Y=-37.64X+1692.66. 3. The clothing weight per clo is 390g/$m^2$. 4. Mostly, subjects were 2~7kinds of the upper and 3~5kinds of the lower clothing. 5. The clothing weights on the upper part of the body are heavier than those on the lower part of it. 6. The standard deviation of the obver clothing is larger than that of the under clothing. 7. The clothing shape of comfort-sensation reporter changes with variation of temperature. 8. The clothing climate of the inner layer is 32.26$\pm$$0.5^{\circ}C$ in temperature, 43.6$\pm$7% in humidity at four seasons. 9. It is represented that total subjects and comfort-sensation reporter control the wearing contents suitably for temperature. 10. The standard of wearing in Pusan is established as Fig. 6.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.950-952
• /
• 1999

In this paper, we are studied a electrical properties study with P.D.GEORGE/STER LING Co. P.B 302-LV-2 POLYBUTADIENE RESIN which is used for VPI(Vacuum Pressure Impregnation)processing of field magnet and armature of traction motor in Korean national railroad at present was carried out its FT-IR (Fourier Transform Infra-Red) volume resistivity characteristics. The varnishes were experimented with the temperature range form $25[^{\circ}C]$ to $180[^{\circ}C]$ and applied voltage were supplied at 100, 250, 500, 1,000[V]. In this condition, the volume resistivity for specimens were measured. From the above study, the following data obtained for volume resistivity. It can be confirmed that velume resistivity with the increase of temperature is lower rapidly from room temperature to $130[^{\circ}C]$, and it is lower slowly at temperature higher than $130[^{\circ}C]$. Volume resistivity value is higher, according as the specimen is thick gradually. As the applied voltage is higher in the same temperature, volume resistivity value is lower.

• Structural Engineering and Mechanics
• /
• v.62 no.5
• /
• pp.587-593
• /
• 2017

The objective of this analytical study is to calculate the elasto-plastic stresses of Functionally Graded (FG) hyperbolic disc subjected to uniform temperature. The material properties (elastic modulus, thermal expansion coefficient and yield strength) and the geometry (thickness) of the disc are assumed to vary radially with a power law function, but Poisson's ratio does not vary. FG disc material is assumed to be non-work hardening. Radial and tangential stresses are obtained for various thickness profile, temperature and material properties. The results indicate that thickness profile and volume fractions of constituent materials play very important role on the thermal stresses of the FG hyperbolic discs. It is seen that thermal stresses in a disc with variable thickness are lower than those with constant thickness at the same temperature. As a result of this, variations in the thickness profile increase the operation temperature. Moreover, thickness variation in the discs provides a significant weight reduction. A disc with lower rigidity at the inner surface according to the outer surface should be selected to obtain almost homogenous stress distribution and to increase resistance to temperature. So, discs, which have more rigid region at the outer surface, are more useful in terms of resistance to temperature.

• International Journal of Highway Engineering
• /
• v.16 no.2
• /
• pp.19-24
• /
• 2014

PURPOSES : The study objective was to evaluate rheology and physical properties of SBS-modified warm-mix asphalt (WMA) binders in comparison with hot-mix asphalt (HMA) binders. METHODS : Four different SBS polymers were used to prepare polymer-modified asphalt (PMA) binders, and three different warm-mix additives (WAD) were used to prepare a total of 12 WMA PMA binders. The kinematic viscosity was measured at 115, $135^{\circ}C$. The PG was determined using DSR and BBR. The pass/fail (P/F) temperatures for high and low PG grading were evaluated for HMA PMA and WMA PMA binders. RESULTS : PG 76-22 binders could be prepared by modifying the base binder (PG 64-22) using 4.5 wt% of SBS. The kinematic viscosity (KV) of SBS PMA was increased by 3 times higher than that of base asphalt. The SBS PMA with WAD showed 10% lower KV than that of the normal SBS PMA at $115^{\circ}C$ The high P/F temperatures showed almost no difference between HMA PMA and WMA PMA binders. The high P/F temperature showed very high correlations with KV ($R^2$ > 0.97). The result of SBS modification caused increase of low P/F temperature by $2.7^{\circ}C$ on average. CONCLUSIONS : Since the PMA with WAD showed 10% lower KV than normal (HMA) PMA at $115^{\circ}C$, reducing PMA mixture temperature down to a WMA level was possible in this study. The higher KV binders showed the higher P/F temperature. There was almost no change in high P/F temperature due to the use of WAD. The SBS PMA, showing an increased low P/F temperature, might show somewhat poorer performance at low-temperature, even though the lower PG grade was staying at the same level, i.e., $-22^{\circ}C$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.1
• /
• pp.68-73
• /
• 2002

High temperature during sprout emergence period of potato (Solanum tuberosum L.) is a major limitation to the yield of fall-grown potato in Korea. To explore the possibility of improving the yield of fall-grown potato through recycled paper mulching, the changes of soil environment and the growth and yield of potato cv. Daeji as affected by three mulching treatments of non-mulched control, recycled paper mulching (RPM), and black polyethylene film-mulching (BPFM) were examined over two fall seasons at Suwon, Korea. The mulching materials were a recycled mulch paper with 110 g/$m^2$ and a thickness of 0.1 mm, which was manufactured from old corrugated containers for this experiment and a commercial black polyethylene film with a thickness of 0.01mm. On an average throughout the growing period, the soil temperature with RPM at the 5-cm depth was lower by 0.4-1.1$^{\circ}C$ than that of the control. The maximum temperature during daytime in RPM was lowered by approximately 1 to 5$^{\circ}C$ according to the weather condition during emergence period, the difference being great on a fine day. The soil temperature with BPFM was much higher than the control. The effect of the mulching treatments diminished as the canopy became developed. The mulching treatments were more advantageous than the control in the conservation of soil water. Moreover, RPM and BPFM efficiently suppressed the occurrence of weeds until the potato harvest. RPM improved the emergence significantly due to lower soil temperature, whereas BPFM showed much poorer emergence than the control. Growth after emergence and yield were significantly higher in RPM than in the control and BPFM. It was concluded that the significantly improved yield in RPM compared to that in the control was mainly due to the improvement of the sprout emergence and tuber growth accompanied by lower soil temperature and better conservation of soil water.

• Journal of the Korean Solar Energy Society
• /
• v.28 no.2
• /
• pp.1-9
• /
• 2008

This paper describes water circulation characteristics of a water/steam receiver at various heat fluxes. The water/steam receiver for a solar tower power system is a natural circulation type. Experimental conditions of water and steam were set at a pressure of 5 bar and temperature of $151.8^{\circ}C$. The experimental device for the water/steam receiver consisted of a steam drum, upper/lower header, riser tubes, and downcomer tube. The experiments were conducted by varying heat fluxes in terms of mass flow rate in each riser tube. However, the total mass flow rate on the riser tubes was fixed at 217.4 g/s. For the uniform heat flux, while the water temperature of the steam drum and upper header were kept at steady state, the temperature of the lower header was fluctuated. For the non-uniform heat flux, while the temperature of the steam drum was kept steady state, the temperature difference increased in the right and left side of the upper header, and the temperature of the lower header was fluctuated.

• Korean Journal of Metals and Materials
• /
• v.46 no.8
• /
• pp.506-515
• /
• 2008

Recently, it is exceedingly required to produce metal powders with tailored shape and phase altogether in order to fabricate high performance functional parts such as magnetic core or electro-magnetic noise suppressor for high frequency usage. Therefore, the collision phenomena of in-flight droplets against chamber wall or neighboring in-flight droplets each other is investigated by a computational method in order to get useful information about how to design the atomizing system and how to tailor process parameters not to make irregular-shaped powders during gas atomization process. As a results, smaller powders, lower melt temperature are known to be favorable for droplets not to collide against chamber wall. In additions, powders of narrower size distribution range, lower droplet generation rate, lower melt temperature, lower gas velocity are desirable to prevent droplet-collisions against neighboring in-flight droplets.

• Korean Journal of Materials Research
• /
• v.23 no.7
• /
• pp.373-378
• /
• 2013

In order to clarify the effect of C/Ti atom ratios(${\chi}$) on the deformation behavior of $TiC_{\chi}$ at high temperature, single crystals having a wide range of ${\chi}$, from 0.56 to 0.96, were deformed by compression test in a temperature range of 1183~2273 K and in a strain rate range of $1.9{\times}10^{-4}{\sim}5.9{\times}10^{-3}s^{-1}$. Before testing, $TiC_{\chi}$ single crystals were grown by the FZ method in a He atmosphere of 0.3MPa. The concentrations of combined carbon were determined by chemical analysis and the lattice parameters by the X-ray powder diffraction technique. It was found that the high temperature deformation behavior observed is the ${\chi}$-less dependent type, including the work softening phenomenon, the critical resolved shear stress, the transition temperature where the deformation mechanism changes, the stress exponent of strain rate and activation energy for deformation. The shape of stress-strain curves of $TiC_{0.96}$, $TiC_{0.85}$ and $TiC_{0.56}$ is seen to be less dependent on ${\chi}$, the work hardening rate after the softening is slightly higher in $TiC_{0.96}$ than in $TiC_{0.85}$ and $TiC_{0.56}$. As ${\chi}$ decreases the work softening becomes less evident and the transition temperature where the work softening disappears, shifts to a lower temperature. The ${\tau}_c$ decreases monotonously with decreasing ${\chi}$ in a range of ${\chi}$ from 0.86 to 0.96. The transition temperature where the deformation mechanism changes shifts to a lower temperature as ${\chi}$ decreases. The activation energy for deformation in the low temperature region also decreased monotonously as ${\chi}$ decreased. The deformation in this temperature region is thought to be governed by the Peierls mechanism.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.11
• /
• pp.3952-3958
• /
• 2011

The effect of sintering temperature on the electrochemical property of $LiMn_2O_4$ was investigated. Results showed that the particle size was increased at higher sintering temperatures while the initial capacity was decreased after high temperature sintering. Capacity fading, on the other hand, was suppressed at lower sintering temperatures since the sintering at higher temperatures (${\geq}800^{\circ}C$) increased the Mn ions with a lower oxidation state ($Mn^{+3}$), which induced structural instability during cycling due to dissolution of Mn ions into the electrolyte. In particular, $LiMn_2O_4$ sintered above $830^{\circ}C$ showed severe capacity fading (capacity loss was 38% of initial capacity) by lower coulombic efficiency due to the abnormally increased particle size.