• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.2
• /
• pp.117-131
• /
• 2006

A coupled T-H-M(Thermo-Hydro-Mechanical) analysis was carried out for KENTEX (KAERI Engineering-scale T-H-M Experiment for Engineered Barrier System), which is a facility for validating the coupled T-H-M behavior in the engineered barrier system of the Korean reference HLW(high-level waste) disposal system. The changes of temperature, water saturation, and stress were estimated based on the coupled T-H-M analysis, and the influence of the types of mechanical constitutive material laws was investigated by using elastic model, poroelastic model, and poroelastic-plastic model. The analysis was done using ABAQUS, which is a commercial finite element code for general purposes. From the analysis, it was observed that the temperature in the bentonite increased sharply for a couple of days after heating the heater and then slowly increased to a constant value. The temperatures at all locations were nearly at a steady state after about 37.5 days. In the steady state, the temperature was maintained at $90^{\circ}C$ at the interface between the heater and the bentonite and at about $70^{\circ}C$ at the interface between the bentonite and the confining cylinder. The variation of the water saturation with time in bentonite was almost same independent of the material laws used in the coupled T-H-M processes. By comparing the saturation change of T-H-M and that of H-M(Hydro-Mechanical) processes using elastic and poroelastic material mod31 respectively, it was found that the degree of saturation near the heater from T-H-M calculation was higher than that from the coupled H-M calculation mainly because of the thermal flux, which seemed to speed up the saturation. The stresses in three cases with different material laws were increased with time. By comparing the stress change in H-M calculation using poroelasetic and poroelasetic-plastic model, it was possible to conclude that the influence of saturation on the stress change is higher than the influence of temperature. It is, therefore, recommended to use a material law, which can model the elastic-plastic behavior of buffer, since the coupled T-H-M processes in buffer is affected by the variation of void ratio, thermal expansion, as well as swelling pressure.

• Korean Journal of Food Science and Technology
• /
• v.14 no.3
• /
• pp.250-256
• /
• 1982

A series of studies were conducted to find out the possibility of utilizing grape seed as resources of food fats and proteins, and the results of the studies are as follows: The grape seed contained 25.1%, of crude fat and 12.0% of crude protein. The lipid, fractions obtained by silicic acid column chromatography were mainly composed of about 95.5% neutral lipid, whereas compound lipid was only 4.5% level. Among the neutral lipid by thin layer chromatography, triglyceride was 91.89%, sterol ester, sterol, diglyceride and free fatty acid were 3.24%, 2.87%, 1.20% and 0.80%, respectively The predominant fatty acids of total and neutral lipids were linoleic acid $(69.72{\sim}71.72%)$ and oleic acid $18.09{\sim}19.46%)$, but those of glycolipid and phospolipid were linoleic acid $(31.49{\sim}38.18%)$, oleic acid $(20.20{\sim}35.27%)$ and palmitic acid $(26.80{\sim}39.98%)$. The major fatty acids of triglyceride separated from neutral lipid were oleic acid (43.08%), linoleic acid (38.42%) and palmitic acid (11.60%). The salt soluble protein of grape seed was highly dispersible in 0.02M sodium phosphate buffer containing about 1.0M $MgSO_4$, and the extractability of seed protein was 31%. Glutamic acid was the major amino acid in salt soluble protein, followed by arginine and aspartic acid. The electrophoretic analysis showed 3 bands in grape seed protein, and the collection rate of the main protein fraction purified by Sephadex G-100 and G-200 was 82%. Glutamic acid, aspartic acid and arginine were the major amino acids of the main grape seed protein. The molecular weight for the main protein of the grape seed was estimated to be 81,000.

• Journal of Animal Science and Technology
• /
• v.49 no.1
• /
• pp.109-120
• /
• 2007

CLA was chemically synthesized by alkaline isomerization method using corn oil. CLA-TG was synthesized by chemical reaction using sodium methoxide. For the control, 10% of back fat among the total component was only added without the annex of CLA-TG. For the first treatment, 5% of CLA-TG among the lard component added into the press ham was replaced. For the 2nd, 3rd and 4rd treatments, 10%, 15% and 20% of CLA-TG was respectively replaced. Manufacture press ham using CLA-TG were vacuum packaged and then stored during 1, 7, 14, 21 and 28 days at 4℃. Samples were analyzed for shear force value, sensory evaluation, TBARS, fatty acid composition and CLA content. Shear force value of control was significantly higher than that of CLA-TG treatment groups(P<0.05). All treatments were increased by the passage of storage time. No remarkable differences were found in sensory properties among control and CLA-TG treatment groups. CLA-TG treatment groups showed significantly(P<0.05) lower TBARS value than the control. TBARS value was increased significantly during storage in all treatment. In the change of fatty acid composition, the contents of C14:0～C20:4 were decreased significantly by CLA-TG additive. Whereas the increase level of CLA-TG additive resulted in the significantly higher unsaturated fatty acid and CLA content. Summing up the a forementioned results, press ham manufacturing with CLA-TG additive was not affected in sensory evaluation. Also, it may be assumed that the high quality press ham can be manufactured with the extent of storage period and CLA accumulation.

• Journal of Animal Science and Technology
• /
• v.47 no.4
• /
• pp.607-614
• /
• 2005

To determine the optimum fermentation condition, the 50:50 feed mixture of both crushed corn and wet brewer’s grain were anaerobically fermented at various conditions. Three supplementation levels(0, 2%, and 5%) of molasses, five supplementation levels(0, 0.1%, 0.5%, 1.0%, and 2.0%) of yeast and five different incubation temperatures(4$^{\circ}C$, 10$^{\circ}C$, 30$^{\circ}C$, 40$^{\circ}C$ and 50$^{\circ}C$) were tested to determine the optimum fermentation conditions. During fermentation, alcohol concentration, live yeast cell number (LYCN) and pH values of the mixture were analyzed. Alcohol concentrations of the fermented feed mixtures were proportionally increased with increasing level of molasses supplementation. After 24hr fermentation, alcohol concentrations at 0.1%, 0.5%, 1.0% and 2.0% of yeast supplementation was 1.9%, 2.4%, 3.1% and 3.1%, respectively. These results indicate a proportional increase of alcohol concentration with the increasing supplementation of yeast (P<0.05) up to 1%, thereafter showing plateau at 2% supplementation. LYCN was relatively high with more than 0.5% yeast supplementation, whereas the value was significantly low(P<0.05) at 0.1% yeast supplementation. Alcohol production was significantly higher at 30$^{\circ}C$ and 40$^{\circ}C$ than other incubation temperatures (P<0.05), with the highest concentration at 30$^{\circ}C$. pH was rapidly decreased until 24 hours of incubation with steeper decrease at lower temperatures(P<0.05). Based on there results, optimum fermentation conditions for the alcoholic-fermented feed production could be achieved with 5% supplementation of molasses, 1% supplementation of yeast, and 24hr long incubation at 30$^{\circ}C$.

• The KIPS Transactions:PartC
• /
• v.10C no.5
• /
• pp.625-634
• /
• 2003

More than a decade after its initial proposal, deployment of IP Multicast has been limited due to the problem of traffic control in multicast routing, multicast address allocation in global internet, reliable multicast transport techniques etc. Lately, according to increase of multicast application service such as internet broadcast, real time security information service etc., overlay multicast is developed as a new internet multicast technology. In this paper, we describe an overlay multicast protocol and propose fast join mechanism that considers switching of the tree. To find a potential parent, an existing search algorithm descends the tree from the root by one level at a time, and it causes long joining latency. Also, it is try to select the nearest node as a potential parent. However, it can't select the nearest node by the degree limit of the node. As a result, the generated tree has low efficiency. To reduce long joining latency and improve the efficiency of the tree, we propose searching two levels of the tree at a time. This method forwards joining request message to own children node. So, at ordinary times, there is no overhead to keep the tree. But the joining request came, the increasing number of searching messages will reduce a long joining latency. Also searching more nodes will be helpful to construct more efficient trees. In order to evaluate the performance of our fast join mechanism, we measure the metrics such as the search latency and the number of searched node and the number of switching by the number of members and degree limit. The simulation results show that the performance of our mechanism is superior to that of the existing mechanism.

• Journal of Animal Science and Technology
• /
• v.45 no.6
• /
• pp.1047-1060
• /
• 2003

To investigate the effects of conjugated linoleic acid added diet feeding on CLA accumulation and quality characteristics of pork meat. The CLA used to add in diet was chemically synthesized by alkaline isomerization method with corn oil. Pigs were divided into 5 treatment groups(4 pigs/group) and subjected to one of five treatment diets(0, 1.25% CLA for 2 weeks, 2.5% CLA for 2 weeks, 1.25% CLA for 4 weeks and 2.5% CLA for 4 weeks, CLA diets; total fed diets) before slaughter. Pork loin were collected from the animals(110 kg body weight) slaughtering at the commercial slaughter house. Pork loin meat were aerobic packaged and then stored during 2, 5, 8, 11 and 14 days at 4$^{\circ}C$. Samples were analyzed for shear force value, texture, TBARS, fatty acid composition, cholesterol and CLA content. CLA treatment groups showed significantly(p〈0.05) higher shear force value compared to those of control group at 11, 14 days of cold storage. All treatments were decreased significantly as the storage period passed. There was a not significantly difference in texture between control and CLA treatment groups. All CLA treatment groups showed significantly(p〈0.05) lower TBARS value than the control. TBARS value was increased significantly during storage in all treatment. CLA treatment groups showed significantly(p〈0.05) lower cholesterol content compared to those of control group. As dietary CLA was increased in feed, the content of CLA was increased, but the control was almost not detected. The contents of CLA were not significantly changed during chilled storage for 14 days. In the change of fatty acid composition, the contents of oleic, linoleic and arachidonic were decreased by dietary CLA-supplementation, whereas the increase level of CLA-supplementation resulted in the higher palmitic and stearic acid. In all results, CLA could be accumulated in pork meat and its antioxidant capability has been indicated. It was suggested that dietary CLA-supplementation could be produced high quality pork.

• Korean Journal of Agricultural Science
• /
• v.5 no.2
• /
• pp.136-144
• /
• 1978

A series of experiments over three years was planned for practical application of rhizobia in farms and grass lands in Korea. This is the report for the studies of the first year mainly on the isolation and characterization of rhizobial strains, and on the assessment of their nodulation abilities and nitrogen fixation capacities. 1. Total number of 88 strains for soybean group and 22 st ra ins for pea and vetch group was isolated from nodules which were taken from legumes grown in Daekwanyong, Cheju and various places in Korea. 2. Morphological and cultural characteristics of the strains were studied, and attempts were also made to investigate their antigenic properties and to demonstrate lysogenic strains in these groups. The results were : i) the isolates varied in cultural characteristics on yeast mannitol broth and agar, and in degree of congo reel absorption ; ii) similarities in their antigenic properties were found between/among the strains: G-3/G-9/D216, G-20/G-52 in soybean group; iii) no lysogeny was found in the strains of these groups. 3. Plant infection tests by test tube and bottle method in light room were carried out to elucidate the ability of the strains to nodulate specific legumes and of the capacity of such nodules to fix atmospheric nitrogen. The isolates were grouped into non- invasive, ineffective, or effective to the legumes. Those strains which produced effective nodules, supporting similar level of growth as nitrate control, were: P-3, 4 and 8 in pea and vetch group; G-23, 27, and, D-216 in soybean group.

• Environmental and Resource Economics Review
• /
• v.14 no.1
• /
• pp.167-199
• /
• 2005

The following policy implications can be drawn from this study: 1) The Air Pollution Emission Amount Report published by the Ministry of Environment since 1991 classifies industries into 4 sectors, i. e., heating, manufacturing, transportation and power generation. Currently, the usability of report is very low and extra efforts should be given to refine the current statistics and to improve the industrial classification. 2) Big pollution industries are as follows - s7, s17 and s20. The current air pollution control policy for these sectors compared to other sectors are found to be inefficient. This finding should be noted in the implementation of future air pollution policy. 3) s10 and s17 are found to be a big polluting industrial sector and its pollution reduction effect is also significant. 4) The effect of emission coefficient (${\Delta}f$) has the biggest impact on the reduction of emission amount change and the effect of economic growth coefficient (${\Delta}y$) has the biggest impact on the increase of emission volume. The effect of production technology factor (${\Delta}D$) and the effect of the change of the final demand structure (${\Delta}u$) are insignificant in terms of the change of emission volume. 5) Further studies on emission estimation techniques on each industry sector and the economic analysis are required to promote effective enforcement of the total volume control system of air pollutants, the differential management of pollution causing industrial sectors and the integration of environment and economy. 6) Korea's economic growth in 1990 is not pollution-driven in terms of the Barry Commoner's hypothesis, even though the overall industrial structure and the demand structure are not environmentally friendly. It indicates that environmental policies for the improvement of air quality depend mainly on the government initiatives and systematic national level consideration of industrial structures and the development of green technologies are not fully incorporated.

• Korean Journal of Food Science and Technology
• /
• v.39 no.4
• /
• pp.452-457
• /
• 2007

In this study, Lilium sp. were separated into bulbs, leaves, and flowers. Then, total polyphenol contents, electron donating ability (EDA), superoxide dismutase (SOD)-like activity, hydroxyl radical scavenging activity, and antimicrobial activity were measured from the extracts of each of the three aforementioned parts. The examination of physiologically active substances in the three parts revealed that Lilium davidii leaves had high total polyphenol contents, SOD-like activity, hydroxyl radical scavenging activity, and EDA, while the flowers of L. lancifolium showed high SOD-like activity, hydroxyl radical scavenging activity, and EDA, as well as a high level of total polyphenols in the bulb. Measurements of the antimicrobial activities of the extracts against Gram positive bacteria revealed that the leaves and flowers of L. davidii and L. lancifolium caused Bacillus subtilis and Salmonella enteritidis to form clear zones greater than 10 mm. Furthermore, the flowers of L. lancifolium showed particularly high antimicrobial activity against B. subtilis, and the flowers of L. davidii had high activity against S. enteritidis. For the Gram negative bacteria, the leaves and flowers of L. davidii and L. lancifolium caused Listeria monocytogenes and Escherichia coli to form clear zones greater than 10 mm, and finally, the flowers of L. davidii and L. lancifolium showed high antibacterial activity, with inhibition exceeding 12 mm.

• Korean Journal of Ecology and Environment
• /
• v.40 no.1
• /
• pp.61-71
• /
• 2007

The photosynthetic characteristics and primary production by phytoplankton in open waters of two wetlands (the Banwol and the Donghwa wetland) of Sihwa Constructed Wetland with different water chemistry were investigated to provide the information for the wetland management considering the water treatment efficiency. During the study period (from March to October, 2005) the primary productivity in open waters ranged from 481 to 11,275 mgC $m^{-2}$ $day^{-1}$, which is very high compared with the eutrophic level of 600mgC $m^{-2}$ $day^{-1}$. From the analysis of the photosynthesis-irradiance (P-I) model parameters, the photosynthetic characteristics may be affected by different concentration and ratio of nutrient (N and P) between two wetlands. Assimilation number (AN) was higher in the Donghwa wetland (average AN: 8.5gC $gChl^{-1}$ $hr^{-1}$) with high P and low N/P ratio than the Banwol wetland (average AN: 5.8gC $gChl^{-1}$ $hr^{-1}$) with high N and high N/P ratio. This result indicates that AN may be concerned with phosphorus than nitrogen and low NIP ratio. Positive correlation (R=0.81) was observed between the initial slope and AN, implying that AN was high in case of phytoplankton having more active photosynthesis ability under low light. On the other hand, maximum photosynthesis (Pmax) was related positively with chlorophyll a concentration showing correlation coefficient of 0.47. In this study, considering the high primary production through phytoplankton photosynthesis in open waters of Sihwa Constructed Wetland, the produced organic matter by phytoplankton may affect the water quality within wetland and its efficiency of water treatment. Also, the photosynthetic characteristics may be affected by different nutrient enrichment (especially phosphorus) of wetlands. This study suggests that the production by phytoplankton and its characteristics in open water of constructed wetland for water treatment should be considered to improve the removal efficiency of organic matter.