• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.286-291
• /
• 2011

Onsite usage of construction equipment accounts for a 6.8% of air pollution in Korea. The high concentration of carbon dioxide in such emissions impact not only climate change, but also people's health. However, greenhouse gas emissions from onsite equipment usage have not yet been fully investigated. This study presents a comparative analysis on how much greenhouse gas is generated by various equipment types used in different construction activities. Two ongoing cases which involve a typical road construction project in Korea were selected for the comparison purpose. Greenhouse gas emissions from each onsite equipment usage of the different activities were estimated on the ground of design documents. The estimates were compared and analyzed to derive the main sources of greenhouse gas emissions. The result showed that earthwork constituted the largest part-more than 90%-among work types. Dump truck, bulldozer, and loader were major sources for such emissions. The study results are expected to be used as a basis for reduction of greenhouse gas emission from onsite equipment usage.

• Elastomers and Composites
• /
• v.55 no.2
• /
• pp.114-119
• /
• 2020

The effect of a greenhouse-covering material on its indoor environment and on the characteristics of cherry tomatoes grown in it was investigated. The conventional polyethylene (PE) film on the greenhouse roof was replaced by a polycarbonate (PC) sheet, while maintaining the main structural frame intact. Color changes and the formation of water droplets on the PC surface were avoided by applying coextrusion and coating layers. When compared to the PE greenhouse, the PC greenhouse enabled increased light transmittance and thus a higher indoor temperature during both summer and winter. The thermal insulating property of the PC sheet effectively reduced the heating loss by approximately 55% during winter. The cherry tomatoes grown in the PC greenhouse exhibited superior fruit characteristics in terms of size, weight, and sugar content. The total amount of cherry tomatoes produced per unit area (1,000 ㎡) in the PC greenhouse was found to be greater by approximately 19% compared to that in the PE greenhouse.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.9
• /
• pp.644-649
• /
• 2004

To control a greenhouse is to control environmental parameters in greenhouse. Controlled environments may be as simple as saran-covered shade houses or as complex as growth chambers. Although greenhouses are probably the most common example of a controlled environment used in agricultural/horticultural production, the type of controlled environment or system that is needed depends upon the climate, time of year, crops being produced and the environmental parameters that must be controlled. In this contribution puts emphasis on construction of automatic-controlled greenhouse system by personal computer.

• Journal of Bio-Environment Control
• /
• v.10 no.4
• /
• pp.225-231
• /
• 2001

This study was conducted to examine effect of different environment conditions in glass, PC, PET and PE greenhouses controlled by different environment control systems on the growth of green pepper. Light transmittance of 64.7% in the glass greenhouse was the highest among different green-houses. Air temperature was the highest in the glass greenhouse when ventilators were closed, and was the highest in the PE greenhouse when ventilators were open. Air relative humidity was the highest in the PE greenhouse during 24 hours. The amount of solar energy accumulated in soil was the greatest in the glass greenhouse and this energy released during the night escaped through covering materials. Latent heat and solar energy affected air temperature increased in greenhouses. The air temperature of glass greenhouse was 27.5$^{\circ}C$ at 11 O clock, which was the highest air temperature among the all greenhouse types. Clear differences were observed in leaf area and plant height at 30 days after transplanting. Days to first flowering was the shortest in the glass greenhouse with 72.7 days. Flower shedding was the greatest in the PE greenhouse with 12.6%. Days to fruit harvesting was the shortest in the glass greenhouse with 14.3 days. Fruit quality, such as fruit length, fruit diameter, fruit flesh thickness, and vitamin C content, was the best in the glass greenhouse. Percent marketable fruits was the highest with 95.3% when the pepper was grown hydroponically in the glass greenhouse.

• International Journal of Advanced Culture Technology
• /
• v.1 no.1
• /
• pp.6-10
• /
• 2013

The greenhouse control system for educational purpose is designed by personal computer. This system should observe and control the growth conditions for crops in both plastic film and glass greenhouses. In this contribution puts emphasis on construction of greenhouse control system by personal computer under the aim of creating safer, more effective and more economical services. This system is developed for the requirements of the intelligent greenhouse control system and is powered by solar energy. A photovoltaic system with sun tracking module is used for the greenhouse control system.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.32 no.E
• /
• pp.80-87
• /
• 1990

Energy balance equations Were developed to describe the heat transfer mechanisms in a double layer plastic greenhouse with a water curtain system. Heat transfer variables were determined by using various temperature data measured in a conventional prototype semicircular cross-section greenhouse over a range of water temperatures and water flow rates. The heat transfer coefficient between flowing water and greenhouse air was independent of water flow rates. But the heat transfer coefficient between water surface and the stagnant air space within the double plastic layer was dependent on water flow rates. Substituting the heat transfer coefficients, determined from the energy balance equations in the heat transfer equations, demonstrated various relationships among ambient air temperature, greenhouse air temperature, water temperature, and water flow rates. The heating benefits were linearly related to not only the inside and outside air temperatures but also to the water temperature. The energy conservation effects of the water curtain system were found even initial water temperatures were considerably lower than the greenhouse setting temperatures. Sensitivity analysis for heat transfer coefficients demonstrated that the heat transfer coefficient between greenhouse air and the stagnant air within the plastic layers was the most significant coefficient in the estimation of heating effects.

• Journal of Korean Society of Rural Planning
• /
• v.23 no.4
• /
• pp.27-38
• /
• 2017

Humans are provided with a wide range of public benefits from ecosystems and agricultural ecosystems. But the establishment of the horticulture complex is a space that hampers the public ecosystem. Therefore, we have evaluated the creating landscape function of the horticulture complex and found improvement. A total of 20 landscape slides were used for the study. Korea-paddy field, Korea-vinyl greenhouse, Korea-glass greenhouse, Japan-vinyl greenhouse and Netherlands-glass greenhouse were selected as 4 slides. The evaluation used the AHP method and 10 adjectives Likert which compares 20 landscape slides. Four Korea-paddy fields were rated highly positive images. All 10 adjectives can be selected as representative images of production scenes. In most adjectives, four scenes of KVG1, KVG2, KVG3 and KVG4, which are the Korea-greenhouse scenes, were evaluated as negative images. Netherlands and Korea-glass greenhouse scenes and Japan-vinyl greenhouse scenes were generally positive images. In conclusion, it is confirmed that glass greenhouse scenery is higher than vinyl greenhouse scenery. And Japan and Netherlands scenery are higher and better than Korea. Therefore, JVG1 in Japan and NGG3 in the Netherlands were proposed to be set as landscape improvement targets.

• Journal of information and communication convergence engineering
• /
• v.16 no.1
• /
• pp.31-37
• /
• 2018

In this work, we propose an analytic framework for evaluating the quality of service and dimensioning the link capacity in the gateway router of a smart farm with a greenhouse eco-management system. Specifically, we focus on the gateway router of an IoT network that provides an access service for smart farms. We design the link capacity of a gateway router that is used for the remote management of the greenhouse eco-management system to accommodate both time-critical and delay-tolerant traffic in a greenhouse LAN. For this purpose, we first investigate the ecosystem for smart farm, and we define the specification and requirements of the greenhouse eco-management system. Second, we propose a system model for the link capacity of a gateway that is required to guarantee the delay performance of time-critical applications in the greenhouse LAN. Finally, the validity of the proposed system is demonstrated through a series of numerical experiments.

• Journal of Bio-Environment Control
• /
• v.25 no.2
• /
• pp.123-132
• /
• 2016

The importance of energy saving technology for managing greenhouse was recently highlighted. For practical use of energy in greenhouse, it is necessary to simulate energy flow precisely and estimate heating/cooling loads of greenhouse. So the main purpose of this study was to develope and to validate greenhouse energy model and to estimate annual/maximum energy loads using Building Energy Simulation (BES). Field experiments were carried out in a multi-span plastic-film greenhouse in Jeju Island ($33.2^{\circ}N$, $126.3^{\circ}E$) for 2 months. To develop energy model of the greenhouse, a set of sensors was used to measure the greenhouse microclimate such as air temperature, humidity, leaf temperature, solar radiation, carbon dioxide concentration and so on. Moreover, characteristic length of plant leaf, leaf area index and diffuse non-interceptance were utilized to calculate sensible and latent heat exchange of plant. The internal temperature of greenhouse was compared to validate the greenhouse energy model. Developed model provided a good estimation for the internal temperature throughout the experiments period (coefficients of determination > 0.85, index of agreement > 0.92). After the model validation, we used last 10 years weather data to calculate energy loads of greenhouse according to growth stage of greenhouse crop. The tendency of heating/cooling loads change was depends on external weather condition and optimal temperature for growing crops at each stage. In addition, maximum heating/cooling loads of reference greenhouse were estimated to 644,014 and $756,456kJ{\cdot}hr^{-1}$, respectively.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1998.10a
• /
• pp.41-67
• /
• 1998

This study aimed at examining the investment and economic analysis of greenhouse horticultural project area by governmental subsidy project. There were only 5 project areas that economic efficiency of investment is recognized in 30 project area in Kyungsangnam-do. And there are 7 project areas to gain farm firm revenue. These were possible area to develop to farm firm. There are 4 project areas to gain farm firm revenue in 18 project areas of glass greenhouse area, and 8 project areas to gain farm firm revenue in 12 project areas-vinyl greenhouse area. The rate of return of the fixed capital is higher in the vinyl greenhouse area than in the glass greenhouse area by type of greenhouse. There were cultivated tomatoes, cucumbers, peppers, etc. in the greenhouse area. The investment efficiency of the fixed capital is higher in cucumber and pepper than in other vegetables. Flowers a re lower than the vegetable in investment efficiency.