• 대한조선학회논문집
• /
• 제58권1호
• /
• pp.49-57
• /
• 2021

In the production power transmitting of a floating production system like a wind offshore floating, the power cable should be connected from the surface system into the subsea system. The connection between the surface and the subsea system will make the power cable get a dynamic load like current and wave forces. Based on this condition, a dynamic power cable is required to endure external physical force and vibration in the long-term condition. It needs more requirements than static power cable for mechanical fatigue properties to prevent failures during operations in marine environments where the external and internal loads work continuously. As a process to verify, the durability test of dynamic power cables under the marine operation environment condition was carried out by using domestic technology development.

• Nuclear Engineering and Technology
• /
• 제45권5호
• /
• pp.665-674
• /
• 2013

This paper presents the development and validation methods of the FUTURE (FUel cycle analysis Tool for nUcleaR Energy) code, which was developed for a dynamic material flow evaluation and economic analysis of the nuclear fuel cycle. This code enables an evaluation of a nuclear material flow and its economy for diverse nuclear fuel cycles based on a predictable scenario. The most notable virtue of this FUTURE code, which was developed using C# and MICROSOFT SQL DBMS, is that a program user can design a nuclear fuel cycle process easily using a standard process on the canvas screen through a drag-and-drop method. From the user's point of view, this code is very easy to use thanks to its high flexibility. In addition, the new code also enables the maintenance of data integrity by constructing a database environment of the results of the nuclear fuel cycle analyses.

• 한국군사과학기술학회지
• /
• 제2권2호
• /
• pp.83-91
• /
• 1999

Dynamic characteristic of manufacturing stage is understood and the utilization of each machine is maximized by developing on-line dynamic CAPP system to consider the overloads in the aircraft part manufacturing line. In this paper, a scheme of production planning and scheduling system was proposed through inspection about some predeveloped CAPP system. Developed production planning and scheduling system included process planning module. After precise inspection of some FMS line schema at domestic heavy industry, optimized FMS line was applied to aircraft part manufacturing and repairing factory. By virtue of considering overloads of factory and machine through on-line dynamic CAPP system, the utilization of resources is maximized and manufacturing lead time is minimized.

• ETRI Journal
• /
• 제21권1호
• /
• pp.55-71
• /
• 1999

Recently, the increased handling of on-line standards information has emerged as an important feature of information and communications technology (ICT) standardization. In order to meet market needs for on-time standards deployment, most standards organizations are actively seeking more efficient ways of standardization using electronic means in order to accelerate the standards making process. This paper suggests a virtual standard development environment designed for standards developers to carry out their standards-related activities on-line. In this paper, we outline a conceptual model of a concurrent standardization process and describe the design and implementation of an Extranet-based network system called standards information cooperative network (SICN). The system was created with a view to fostering faster standards development with functionalities such as a virtual management of networked standards developers, collaboration support tools, a workflow-based electronic signature system, and dynamic links for ready retrieval of standards information stored in a database. We conclude this paper with an introduction to the concept of a virtual standards development organization (VSDO) that supports all the features needed by the relevant standards making bodies to carry out their activities in a dynamic on-line environment.

• 한국기계가공학회지
• /
• 제12권5호
• /
• pp.116-121
• /
• 2013

A high speed deburring machine was developed based on the analysis of magnetic contact force, forced vibration, stiffness and deformation of the structure. After 3 dimensional CATIA modelling, the stiffness and the deformation properties of the deburring machine in static and dynamic condition using finite element method were analyzed. Both static and dynamic simulation results showed that designed high speed deburring machine was well satisfied the stability properties at the operating condition. we have performance test program for the real system to evaluate the simulation results.

• 대한조선학회논문집
• /
• 제60권5호
• /
• pp.375-387
• /
• 2023

The subsea power cables are increasingly important for harvesting renewable energies as we develop offshore wind farms located at a long distance from shore. Particularly, the continuous flexural motion of inter-array dynamic power cable of floating offshore wind turbine causes tremendous fatigue damages on the cable. As the subsea power cable consists of the helical structures with various components unlike a mooring line and a steel pipe riser, the fatigue analysis of the cables should be performed using special procedures that consider stick/slip phenomenon. This phenomenon occurs between inner helically wound components when they are tensioned or compressed by environmental loads and the floater motions. In particular, Vortex-induced vibration (VIV) can be generated by currents and have significant impacts on the fatigue life of the cable. In this study, the procedure for VIV fatigue analysis of the dynamic power cable has been established. Additionally, the respective roles of programs employed and required inputs and outputs are explained in detail. Demonstrations of case studies are provided under severely sheared currents to investigate the influences on amplitude variations of dynamic power cables caused by the excitation of high mode numbers. Finally, sensitivity studies have been performed to compare dynamic cable design parameters, specifically, structural damping ratio, higher order harmonics, and lift coefficients tables. In the future, one of the fundamental assumptions to assess the VIV response will be examined in detail, namely a narrow-banded Gaussian process derived from the VIV amplitudes. Although this approach is consistent with current industry standards, the level of consistency and the potential errors between the Gaussian process and the fatigue damage generated from deterministic time-domain results are to be confirmed to verify VIV fatigue analysis procedure for slender marine structures.

• 산업공학
• /
• 제21권2호
• /
• pp.209-220
• /
• 2008

Recently, innovative medical services are fast emerging, which include customized medical services based on bio-informatics, composition of cure and well-being exploiting ubiquitous technology, hospital supply chain management using RFID, and so forth. However, conventional approaches for new service development hardly give us systematic model to analyze and produce creative medical services. Because most of them are static and concentrate on microscopic tools or techniques. Thus, it is highly desirable to suggest an integrative framework to organize the whole transformation process from technology to medical service. The objective of this study is to propose a medical service engineering model based on the dynamic innovation theory. The proposed model contains objectives of service system, strategies of hospital, stages, activities required to deal with medical service life cycle, which incorporates the acquisition of new technology, transformation to the product, penetration into market, and adoption of consumers. In addition, the usefulness and applicability of the newly proposed model are provided using catholic medical center example.

• 한국경영과학회지
• /
• 제40권4호
• /
• pp.19-33
• /
• 2015

Recently, interest in research and development (R&D) investment decisions have increased among Korean domestic enterprises. However, existing R&D investment studies only focused on government R&D investment policies while only a few studies investigated firm level R&D investment. Prior literatures also overlooked the feedback loop between R&D investment and firm performance. Therefore, this paper identifies a system dynamics model for R&D investment decision making in domestic electronics firms. The conceptual model is derived from R&D investment-related theories found in bodies of literature on company performance, enterprise activity, and market maturity. This study investigates the dynamic feedback between R&D activities and sales using the system dynamics model. In other words, the system dynamics model is used to explain the change in the closed feedback circulation structure in R&D investment activities including technology development, production process, and marketing that subsequently result in sales increase and re-investment into R&D from the generated revenues. There are two major results. First, a similar ratio of investment on technology development and production process derives the higher company sales. Second, regardless of market maturity, marketing investment ratio positively affects sales and R&D budget growth. This study provides a system dynamics model to find the optimal ratio for R&D investment and suggests managerial strategic implications on electronic firm R&D investment decision making under market maturity condition.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.348-352
• /
• 2002

a basis such as IT(Information Technology), NT(Nano Technology) and BT(Bio Technology). Recently, NT is applied to various fields that are composed of science, industry, media and semiconductor-micro technology. It has need of IT that is ultra-precision positioning technology with strokes of many hundreds mm and maintenance of nm precision in fields of ultra micro process, ultra precision measurement, photo communication part and photo magnetic memory. This thesis represents optimal design on ultra-precision positioning with single plane X-Y stage and development of artificial control system for adequacy of industrial demand. Also, dynamic simulation on global stage is performed by using ADAMS (Automated Dynamic Analysis of Mechanical System) for the purpose of grasping dynamic characteristic on user designed X-Y global stage. The error between displacements from micro stage and from FEM(Finite Element Method) is 3.53% by verifications of stability on micro stage and control performance. As maximum Von-mises stress on hinge of micro stage is 5.981kg/mm$^2$ that is 1.5% of yield stress, stability on hinge is secured. Preparing previous results, optimal design of micro stage can be possible, and reliance of results with FEM can be secured.

• 기술혁신연구
• /
• 제12권2호
• /
• pp.1-19
• /
• 2004

This paper focuses on the significant issues of technological capability development of latecomer firms, and government policies enabling such firms to attain certain level of technological capability. The survey and case studies of manufacturing firms in Thailand were conducted to substantiate and investigate the process of technological capability development of latecomer firms. The analysis portrays a dynamic view of technological capability development that comprises three key elements namely strategic capability, internal capability, and external linkage capability. The paper, subsequently, discusses and suggests a tentative taxonomy of government policies and measures to support firms' technological capability development.