• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.5
• /
• pp.567-573
• /
• 2008

Water quality in the longitudinal and cross section was measured and analyzed at Dal stream. The change of water quality was compared with the change of discharge at the important points. When discharge was increased by rainfall, the concentration of BOD was decreased and the concentrations of TN and TP were increased. The correlation coefficient of BOD, TN, TP showed large with the water velocity and depth in the Case 2 that discharge was increased. Rainfall had much influenced in water quality because of moving the nonpoint source to the channel. Water velocity was analyzed by numerical model(Surface water Modeling System). Velocity was comparatively fast in the upstream that had a steep slope and narrow channel. The characteristics of pollution transfer was simulated in 2-dimensional channel, the pollution diffused rapidly to the center of flow in the main channel. Flow had much influenced in diffusion of pollution.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.189-195
• /
• 1999

We have studied the vortex dynamics in YBa$_2Cu_3O_7$ single crystals with columnar defects using micro Hall-probe array. The Hall-probe array technique allowed a simultaneous measurement of the time and spatial dependence of the vortex density so that more detailed information on flux dynamics could be obtained. We found that field profiles inside sample were similar to the Bean's critical state model from the magnetic hysteresis measurement. Normalized relaxation rates were maximum near the center and decreased toward the edge if applied field H$_{app}$ is greater than the penetration field H. But applied magnetic field H$_{app}$ is less than H, relaxation rates were minimum near the center and increased toward edge. We found that glassy exponent ${\mu}$ has the value of ${\sim}$ 1 whose corresponding vortex motion is half-loop excitation. However, single vortex creep, ${\mu}$ ${\sim}$ 1/7, was also found at 30 K and H$_{app}$ ${\cong}$ H'. Calculation of activation energy, U, was possible from direct analysis of the local relaxation data using the basic diffusion equation. From these results, we found that U increases logarithmically with time and U around center was lower than that at the edge.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.231-237
• /
• 1996

Defect equilibrium equations were modelled, and the relations of P $o_2$, venus x were derived using the mass action law. The dominant defect species active in a specified region were determined by fitting the curve of experimental data to the calculated curve of log P $o_2$, versus log x for each theoretical model. The calculated curve for (2:1:2) and (Er')$^{x}$ in the hyperstoichiometric $U_{1-y}$E $r_{y}$ $O_{2＋x}$ and that for (2Er'quot;)$^{x}$ $_{dec}$ in the hypostoichiometric $U_{1-y}$E $r_{y}$ $O_{2－x}$ are in good agreement with the present experimental results. The sintering behavior of Er-doped U $O_2$ is observed with erbium content in oxidizing and reducing atmospheres. For sintering in oxidizing atmosphere, sintered density decreases as increasing y in $U_{1-y}$E $r_{y}$ $O_{2＋x}$. However, in hydrogen atmosphere, sintered density decreases as increasing y at lower erbium content but the density increases again above y=0.10. In oxidizing sintering conditions, the formation of (Er'U')$^{x}$ clusters hinders the diffusion of cations, and hence the sinterability of Er-doped U $O_2$ decreases. In reducing atmosphere of Er-doped U $O_2$ for higher Er concent, the oxygen vacancies make (Er')$^{x}$ cluster decompose by charge compensation and the concentration of mobile cations increases, thereby improving the sinterability.ntration of mobile cations increases, thereby improving the sinterability.ability.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.1
• /
• pp.237-250
• /
• 2017

This study focuses on the maintenance of the registration details of the cadastral study (drawings, chiefs) in relation to Uiwang city real estate administration information unification project by the data maintenance business. The purpose of this study is to provide high quality data and improve the efficiency of data maintenance business in the unification of real estate administration information together with the intellectual study diffusion maintenance model in the future. In this study, based on the results of the intellectual study data maintenance project and the effectiveness of institutional, temporal and cost aspects, it was able to show the effect of the data maintenance project. And analyzed the current situation, typed the error shown here, and developed the maintenance plan and maintenance result.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.3
• /
• pp.127-131
• /
• 2001

The effect of grain shape on the grain growth behavior of oxide system was investigated as afunction of liquid content during liquid phase sintering. As a model system, the solid grains of $Al_{2}O_{3}$ and MgO were selected during liquid phase sintering, i.e. faceted shape of $Al_{2}O_{3}$ in $CaAl_{2}Si_{2}O_{8}$ liquid phase and spherical shape of MgO in $CaMgSiO_{4}$ liquid phase. The average grain size of MgO with spherical shape was decreased with increasing the liquid phase content, whereas that of $Al_{2}O_{3}$ with faceted shape was independent of liquid phase content. In the case of $Al_{2}O_{3}$ grains with faceted shape, which interfaces are expected to be atomically flat, are likely to grow by the interfacial reaction controled process. Whereas, in the case of MgO grains with spherical shape, which interface are expected to be atomically rough, are likely to grow by the diffusion controlled process.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.5
• /
• pp.1-9
• /
• 2017

The cryogenic nitrogen spray of a swirl injector has been numerically investigated using three dimensional LES turbulence model to analyze the dynamic characteristics under supercritical condition. To predict the precise nitrogen properties under supercritical condition, SRK equation of state, Chung's method for viscosity and thermal conductivity and Takahashi's correlation based on Fuller's theory for diffusion coefficient are implemented. The complex flow structures due to interaction between flow field and acoustic field are observed inside and outside the injector under supercritical condition. FFT, POD, and DMD techniques are employed to understand the coherent structures. By implementing the FFT, the dominant frequencies are identified inside and outside the injector. The coherent flow structures related to the dominant frequencies are visualized using the POD and DMD techniques. In addition, the DMD provides the damping coefficient which is related with the instability prediction.

• KSBB Journal
• /
• v.28 no.5
• /
• pp.319-326
• /
• 2013

This study was carried out to investigate the in vitro and in vivo moisturizing properties and percutaneous absorption of PEG-impregnated Aloe vera gel. The PEG-i-Aloe gel was obtained from dewatering and impregnation by soaking (DIS) of Aloe vera leaf slice. The moisturizing property of the obtained sample was evaluated by moisture determination using gravimetric method in desiccator under different RH% and by water sorption-desorption test on human skin. The transdermal penetration characteristics of PEG-i-Aloe gel was investigated by Franz diffusion cell in vitro transdermal absorption method. PEG-i-Aloe gel had high moisture retention ability and could significantly lead the enhancing skin hydration status as well as reducing the skin water loss due to the film formation as a skin barrier. The skin penetration rate of PEGi- Aloe gel at steady state was 9.76 ${\mu}g/(h{\cdot}cm^2)$ and the quantity of the transdermal absorption was 144 ${\mu}g/cm^2$ in 9 hr. The penetration mechanism was well fitted with Higuchi model ($R^2$ = 0.974-0.994). The results show that PEG-i-Aloe gel has the significant moisturizing effect and strong penetration of the animal skin. It could be used as the moisturizing additive in cosmetic skin products.

• Journal of the Korean Society of Safety
• /
• v.33 no.1
• /
• pp.128-134
• /
• 2018

With the increase in frequency of typhoons and heavy rains following the climate change, the scale of damage from the calamities in the mountainous areas has been growing larger and larger, which is different from the past. For the case of Korea where 64% of land is consisted of the mountainous areas, establishment of the check dams has been drastically increased after 2000 in order to reduce the damages from the debris flow. However, due to the lack of data on scale, location and kind of check dams established for reducing the damages in debris flow, the measures to prevent damages based on experience and subjective basis have to be relied on. Under this study, the high-precision DEM data was structured by using the terrestrial LiDAR in the Jecheon area where the debris flow damage occurred in July 2009. And, from the numerical models of the debris flow, Kanako-2D that is available to reflect the erosion and deposition action was applied to install the erosion control facilities (water channel, check dam) and analyzed the effect of reducing the debris flow shown in the downstream.After installing the erosion control facilities, most of debris flow moves along the water channel to reduce the area to expand the debris flow, and after installing the check dam, the flow depth and flux of the debris flow were reduced along with the erosion. However, as a result of analyzing the diffusion area, flow depth, erosion and deposition volume of the debris flow generated from the deposition part after modifying the location of the check dams with the damages occurring on private residences and agricultural land located on the upstream area, the highest reduction effect was shown when the check dam is installed in the maximal discharge points.

• The Journal of the Korea Contents Association
• /
• v.11 no.10
• /
• pp.396-404
• /
• 2011

With increasing of smartphone users various smartphone studies have been carried out. The purpose of this paper is to examine the factors influencing the usage intention of smartphone healthcare application. The influencing factors found from literature reviews on Technology Acceptance Model and the diffusion of innovations theory are user interface design, self-efficacy, innovativeness, and entertainment. Survey is conducted to 220 people in Seoul metropolitan area. The survey results are analyzed regarding the difference for the intention of healthcare application in accordance with respondents' demographic and application usage characteristics. We also examine the difference among four influencing factors by users and non-users. As a result there are significant differences in self-efficacy and innovativeness. This gives some implications to application developers: the system should be easy to use and provide new and useful health contents that can attract early-adopters' attention in order to increase the number of application users.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.3
• /
• pp.129-138
• /
• 1993

In this study, the applicability of finite analytic method (FAM) is studied by selecting linearized-Burgers equation and Burgers equation which have convective and diffusive behaviors as the model equation of Navier-Stokes equations and by comparing numerical solution of finite difference method (FDM) and finite analytic method. The results are as follows. It is shown that the convergence of FAM for steady-state analytic solution of linearized-Burgers equation and Burgers equation is better than that of FDM under the same criteria. Also the accuracy of FAM for transient solution of Burgers equation is excellent. Especially, it is shown that oscillation phenomenon due to dispersion errors which occur according to the choice of grid size in FDM does not occur in FAM at all. So, it can be thought that FAM is numerically very stable scheme, which is free from dispersion errors.