• Journal of Mechanical Science and Technology
• /
• 제20권9호
• /
• pp.1502-1513
• /
• 2006

This study analyzes the design and part load performance of a power generation system combining a micro gas turbine (MGT) and an organic Rankine cycle (ORC). Design performances of cycles adopting several different organic fluids are analyzed and compared with performance of the steam based cycle. All of the organic fluids recover greater MGT exhaust heat than the steam cycle (much lower stack temperature), but their bottoming cycle efficiencies are lower. R123 provides higher combined cycle efficiency than steam does. The efficiencies of the combined cycle with organic fluids are maximized when the turbine exhaust heat of the MGT is fully recovered at the MGT recuperator, whereas the efficiency of the combined cycle with steam shows an almost reverse trend. Since organic fluids have much higher density than steam, they allow more compact systems. The efficiency of the combined cycle, based on a MGT with 30 percent efficiency, can reach almost 40 percent. hlso, the part load operation of the combined system is analyzed. Two representative power control methods are considered and their performances are compared. The variable speed control of the MGT exhibits far better combined cycle part load efficiency than the fuel only control despite slightly lower bottoming cycle performance.

• Nuclear Engineering and Technology
• /
• 제38권2호
• /
• pp.109-118
• /
• 2006

Various indirect power cycle options for a helium cooled gas cooled fast reactor (GFR) with particular focus on a supercritical $CO_2(SCO_2)$ indirect cycle are investigated as an alternative to a helium cooled direct cycle GFR. The balance of plant (BOP) options include helium-nitrogen Brayton cycle, supercritical water Rankine cycle, and $SCO_2$ recompression Brayton power cycle in three versions: (1) basic design with turbine inlet temperature of $550^{\circ}C$, (2) advanced design with turbine inlet temperature of $650^{\circ}C$ and (3) advanced design with the same turbine inlet temperature and reduced compressor inlet temperature. The indirect $SCO_2$ recompression cycle is found attractive since in addition to easier BOP maintenance it allows significant reduction of core outlet temperature, making design of the primary system easier while achieving very attractive efficiencies comparable to or slightly lower than, the efficiency of the reference GFR direct cycle design. In addition, the indirect cycle arrangement allows significant reduction of the GFR &proximate-containment& and the BOP for the $SCO_2$ cycle is very compact. Both these factors will lead to reduced capital cost.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.1050-1053
• /
• 1995

A stock removal cycle is developed as a programming tool of the CNC lathe. This cycle support the easiness and swifness of a part program generation in the shopfloor. The cycle contains the function of tool path generation of rough/finish cutting, of avoidance air-cut for non-cylindrical (die-casted, forged) workpiece, and of the tool collisopn detection/aviodance. Consequently the intelligent stock removal cycle results in improving the productivity and safety of CNC lathe.

• 설비공학논문집
• /
• 제14권10호
• /
• pp.801-810
• /
• 2002

We have analyzed a combined cycle employing refrigerant Rankine cycle and simple refrigeration cycle with one working fluid. Although this cycle shows promising aspects such as simplicity, it does not have a good efficiency to compete with the other existing technologies because of high temperature at the exit of the turbine. However, by introducing a recuperator, it is found that the cycle efficiency can be improved up to the level much higher than other technology＇s efficiency.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권5호
• /
• pp.667-678
• /
• 2021

The industrial life cycle theory was extended to the product life cycle theory and the corporate life cycle theory, but a conceptual life cycle was presented, and quantitative empirical evidence for this was insufficient. It is intended to improve appropriate resource planning and resource allocation by quantitatively predicting the industrial cycle and its position (age) in the cycle. Human resources, tangible assets, and industrial output analysis were conducted based on 28 years of actual data of 39 industries in Korea by applying the Gompertz model, which is a population ecology prediction model. By predicting with the Gompertz model, the coefficient of determination R2 value was 97% or more, confirming the high suitability with the actual cumulative sales value of the industry. A numerical model for calculating the life cycle of each industry, calculating the saturation of input resources for each industry, and diagnosing the financial stability of the industry was presented. These results will contribute to the decision-making of industrial policy officers for budget planning appropriately for each stage of industry development. Future research will apply the numerical model of this study to foreign national industries, complete an inter-industry convergence diagnostic model (e.g. ease of convergence, suitability of convergence, etc.) for renewal of fading industries.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권6호
• /
• pp.592-598
• /
• 2015

본 연구에서는 공랭식 VI(Vapour-Injection) 사이클을 적용한 R410A용 고성능 하절기 냉방 열펌프의 성능 특성을 실험적으로 규명하였다. 실험에 사용한 장치는 VI 압축기, 응축기, 유분리기, 판형열교환기, 에코노마이져(economizer), 증발기, 그리고 재냉기(re-cooler)로 구성하였다. 냉방 성능 실험 조건은 다음과 같이 3가지 사이클로 VI 사이클을 적용하고 증발기 출구 냉매와 VI사이클 흡입 냉매가 재냉기에서 서로 열교환 하지 않는 사이클(사이클 A)과 열교환을 하는 사이클(사이클 B), 그리고 VI 사이클도 적용하지 않고 증발기 출구 냉매와 VI 사이클 흡입 냉매와의 열교환도 없는 사이클(사이클 C)로 구분하였다. 분석 결과, 냉방 성능은 증발기 출구 냉매와 VI사이클 흡입 냉매가 서로 열교환하는 VI사이클(사이클 B)이 가장 높았으며 VI사이클을 적용하지 않은 사이클 C가 가장 낮음을 알 수 있었으며, 사이클B의 냉방성능계수($COP_C$)가 평균 3.5로 사이클A보다 8.6%, 사이클C보다 33% 높은 값을 나타내었다.

• Journal of Sport and Applied Science
• /
• 제2권1호
• /
• pp.1-10
• /
• 2018

Today, the population of cycle participants is consistently increasing. Cycling is becoming not only a form of physical exercise but also a form of tourism in which cycle activities are related to visiting a particular destination. With the perspective of participation sport tourism, the purpose of this study is to investigate how the level of cycle tourists' participation affects their quality of life. An online survey link was sent to cycle participants to collect data. Out of the total 337 respondents, a total of 226 samples were used for the final analysis, disregarding those that were found to be inadequate or unreliable. For data analysis, frequency analysis, reliability test, validity, correlations, and regressions were employed with SPSS 22.0. For our first result, we found that the level of cycle participation did not significantly affect the quality of physical life. Second, the level of cycle participation did not have significant effect on the quality of mental life. Third, the level of cycle participation behavior did not have a significant effect on the quality of social life. Fourth, the level of cycle participation behavior did not have a significant effect on the quality of environmental life. Conclusions and political implications are discussed.

• 대한산업공학회지
• /
• 제42권3호
• /
• pp.241-248
• /
• 2016

Plant life cycle consists of design, construction, certification, operation, and maintenance phases, and various and enormous plant life cycle data is involved in each phase. Plant life cycle data should be linked with each other based on its proper relationships, so that plant operators can access necessary plant data during their regular operations and maintenance works. Currently, the relationships of plant life cycle data may not be defined explicitly, or they are scattered over several plant information systems. This paper proposes high level design of a plant life cycle data management system based on pre-defined plant life cycle database design. ISO-15926 standard is adapted for the database design. User-interface designs of the plant life cycle data management system are explained based on analysis of plant owners' requirements. A conceptual design of the database is also described with the entity-relationship diagram.

• 시스템엔지니어링학술지
• /
• 제4권1호
• /
• pp.11-18
• /
• 2008

As a government agency or the Government-donated Research Institute or industrial research institute is intended to develop a product or to construct a system such as a railway safety systems by research and development process, a life cycle model leading a product development or a research and development is essential to them to systematically and effectively progress it. In this paper, the refined life cycle model to effectively conduct the national railway safety project consists of the life cycle phases and their detail descriptions with reference to other life cycle model in the international standard and the other national guidance and other industrial domain such as ship-building, weapon system, and aerospace areas, the proposed life cycle model in the paper considerably reflects the characteristics of the traditional research and development project in railway safety domain. A guidance of a life cycle model which based on lots of the life cycle model in other domains proposes additionally.

• 한국의류산업학회지
• /
• 제21권1호
• /
• pp.75-87
• /
• 2019

The purpose of the study was to suggest a cycle wear top jersey improved in mobility. The study developed a new cycle wear with improvement in dissatisfaction factors by planning design, pattern and the functionality of fabric. Considering the amount of sweat and the necessities of compression part, the basic material, the additional compression material, and the mesh material were arranged differently according to areas. The assessment of the developed cycle wear was composed of wearing comfort evaluation by female cyclist, photo analysis and garment pressure evaluation. The developed cycle wear was evaluated and compared with the current cycle wear. As a result of wearing comfort evaluation, the developed cycle wear was evaluated as better than the existing ones in all part, particularly in the areas of reflection tape and materials, partial pressure, pocket size, and prevention of loss. Photo analysis was in agreement with the appearance evaluation of the participants. As a result of garment pressure evaluation, the front neck part was more comfortable and the upper arm, abdomen, and waist area showed higher pressure, so it partially supported the body. This study has significant meaning for developing a new cycle wear top, protecting the body and improving the exercise effect.