• Korean Journal of Social Welfare
• /
• v.57 no.3
• /
• pp.51-72
• /
• 2005

The purpose of this article is to empirically testify three hypotheses on the relation between married women's employment and the allocation of unpaid domestic work within households - i.e., adaptive partnership (AP), dual burden (DB) and lagged adaptation (LA) models. The AP hypothesis assumes that, when wives are employed, husbands spend more time doing housework in order to compensate for their wives' increased responsibility. The DB model, by contrast, indicates that, even if married women are employed, their burden on domestic work does not decrease. In this case, therefore, the dual burden of married women can be expected. Between these two opposite views, the third, alternative hypothesis has been suggested recently. The LA model argues that the behaviours of households are adaptive to the changing environments but over a period of many years and even across generations. The article has analysed the total work time as well as unpaid domestic work time to testify these three hypotheses, utilising 1999 Time Use Survey data of the National Statistical Office. The research results can be summarised as follows. First, married working women worked 100 minutes more than their male spouses. Second, the average domestic work time of married men, 23-25 minutes per day, was no more than 5-10% of that of women. Third, the effects of age and women's employment were not statistically significant in multiple regression models, which means that the DB hypothesis explains the situation of married working women in Korea. Based on these findings, the article suggested the expansion of the public social service system to mitigate the dual burden of married working women, the introduction of compensatory credit for caring work, and the directions of further empirical research using the time use survey data.

• Journal of Environmental Science International
• /
• v.23 no.12
• /
• pp.2045-2056
• /
• 2014

In this study, pressure drop was measured in the pulse jet bag filter without venturi on which 16 numbers of filter bags (Ø$140{\times}850{\ell}$) are installed according to operation condition(filtration velocity, inlet dust concentration, pulse pressure, and pulse interval) using coke dust from steel mill. The obtained 180 pressure drop test data were used to predict pressure drop with multiple regression model so that pressure drop data can be used for effective operation condition and as basic data for economical design. The prediction results showed that when filtration velocity was increased by 1%, pressure drop was increased by 2.2% which indicated that filtration velocity among operation condition was attributed on the pressure drop the most. Pressure was dropped by 1.53% when pulse pressure was increased by 1% which also confirmed that pulse pressure was the major factor affecting on the pressure drop next to filtration velocity. Meanwhile, pressure drops were found increased by 0.3% and 0.37%, respectively when inlet dust concentration and pulse interval were increased by 1% implying that the effects of inlet dust concentration and pulse interval were less as compared with those changes of filtration velocity and pulse pressure. Therefore, the larger effect on the pressure drop the pulse jet bag filter was found in the order of filtration velocity($V_f$), pulse pressure($P_p$), inlet dust concentration($C_i$), pulse interval($P_i$). Also, the prediction result of filtration velocity, inlet dust concentration, pulse pressure, and pulse interval which showed the largest effect on the pressure drop indicated that stable operation can be executed with filtration velocity less than 1.5 m/min and inlet dust concentration less than $4g/m^3$. However, it was regarded that pulse pressure and pulse interval need to be adjusted when inlet dust concentration is higher than $4g/m^3$. When filtration velocity and pulse pressure were examined, operation was possible regardless of changes in pulse pressure if filtration velocity was at 1.5 m/min. If filtration velocity was increased to 2 m/min. operation would be possible only when pulse pressure was set at higher than $5.8kgf/cm^2$. Also, the prediction result of pressure drop with filtration velocity and pulse interval showed that operation with pulse interval less than 50 sec. should be carried out under filtration velocity at 1.5 m/min. While, pulse interval should be set at lower than 11 sec. if filtration velocity was set at 2 m/min. Under the conditions of filtration velocity lower than 1 m/min and high pulse pressure higher than $7kgf/cm^2$, though pressure drop would be less, in this case, economic feasibility would be low due to increased in installation and operation cost since scale of dust collection equipment becomes larger and life of filtration bag becomes shortened due to high pulse pressure.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.3
• /
• pp.179-187
• /
• 2018

Purpose: The purpose of this study was to investigate the effect of heat applied to disintegrate cement on the removal torque value and fracture strength of titanium abutment and abutment screw. Materials and methods: Implants, titanium abutments and abutment screws were prepared for each 20 piece. Implant abutments and screws were classified as the control group in which no heat was applied and the experimental group was heated in a vacuum furnace to $450^{\circ}C$ for 8 minutes and cooled in air. The abutments and screws were connected to the implants with 30 Ncm tightening torque at interval 10 minutes and the removal torque value was measured 15 minutes later. And the fracture strength of abutment screw was measured using universal testing machine. Results: The mean removal torque value was $27.84{\pm}1.07Ncm$ in the control group and $26.55{\pm}1.56Ncm$ in the experimental group and showed statistically significant difference (P < .05). The mean fracture strength was $731.47{\pm}39.46N$ in the control group and $768.58{\pm}46.73N$ in the experimental group and showed statistically no significant difference (P > .05). Conclusion: The heat applied for cement disintegration significantly reduced the removal torque value of the abutment screw and did not significantly affect fracture strength of the abutment screw. Therefore, in the case of applying heat to disintegrate cement it is necessary to separate the abutment screw or pay attention to the reuse of the heated screw. However further studies are needed to evaluate the clinical reuse of the heated screw.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.6
• /
• pp.926-933
• /
• 2014

The purpose of this study was to evaluate vegetable intakes according to body mass index (BMI) of adolescents. For this, 400 middle and high school adolescents living in Buyeogun, Chungnam were classified into underweight group, healthy weight group, and overweight group according to BMI, after which eating habits, daily intake levels of vegetables, perception of vegetables, and vegetable-related eating habits were compared and analyzed. As the reason for skipping breakfast, 'Lack of time (44.3%)' was the most frequently cited. In the case of unbalanced food intakes, the underweight group and overweight group showed the highest response for 'grain' while the healthy weight group showed the highest response for 'vegetables' with significant differences (P<0.001). Daily intakes of one serving size of vegetables was 3.3 in the underweight group, 3.8 servings in the healthy weight group, and 3.8 servings in the overweight group, but there was no significant difference. However, frequency of vegetable intake at lunch was once in the underweight group, which was significantly lower than 1.3 servings in the healthy weight group and 1.4 servings in the overweight group (P<0.05). Regarding perception of vegetables, perception of 'Vegetable consumption helps to get beautiful skin' (P<0.01) and 'I eat vegetables or don't eat depending on a cooking method' (P<0.05) were significantly higher in the underweight group. In the evaluation of vegetables-related eating habits, preference for vegetables in the underweight group was lower than that in the healthy weight and overweight groups (P<0.05). Summarizing the above results, vegetable intake by adolescents was generally low, and the frequency of vegetable intake at lunch as well as preference for vegetables were significantly lower in the underweight group. Studies to identify the relationships between adolescent body types and vegetable intakes are required.

• Journal of the Korean Arthroscopy Society
• /
• v.13 no.1
• /
• pp.22-27
• /
• 2009

Purpose: To identify the damage of the articular cartilage and analyze the clinical results of the partial medial meniscectomy. Materials and Methods: From January 2001 to December 2004, forty-eight patients in the degenerative arthritis and medial meniscal tear of knee who undertook arthroscopic partial meniscectomy and were able to keep pace with the times follow-up for more than 3 years were enrolled in this study. Six cases were men and 42 were women, and the mean age was 55.7 years (40~78 years). The patients were classified into two groups according to the Outerbridge grade. Grade I and II were classified into group 1 and grade III and IV into group 2. Group 1 included 30 cases and group 2 included 18 cases. The result were analyzed according to the Tapper & Hoover classification and Lysholm knee scoring scale. And we measured the distance of medial joint space in standing anteroposterior (AP) view of both sides at the pre-operative and the last follow-up. Results: According to the Tapper & Hoover classification, 28 cases were excellent, 7 cases good, 8 cases fair, and 5 cases poor. Among group 1, 25 cases were excellent, 2 cases good, 2 cases fair, 1 case poor. However, among group 2, 3 cases were excellent, 5 cases good, 6 cases fair, 4 cases poor. Average Lysholm knee score was improved from 62.4 preoperatively to 94 postoperatively in group 1, and from 58 preoperatively to 77.9 postoperatively in group 2. The joint space narrowing showed no statistically significant difference in both knees standing AP view. Conclusion: The arthroscopic partial meniscectomy for a patient with the degenerative articular cartilage was an effective treatment. However, we could not satisfy the results, in cases of Outerbridge grade III and IV. In grade III and IV, the partial meniscectomy was not aggravated the cartilage damage.

• Korean Journal of Microbiology
• /
• v.46 no.4
• /
• pp.334-340
• /
• 2010

It is well known that smoking as well as drinking is a factor of stomatopathy, however there are few investigations about comparison of oral flora between smokers and non-smokers. In this study, we isolated the oral flora of 30 smokers and 30 non-smokers and cultured them on blood agar plates. The isolated pathogenic microorganisms were tested for antibiotic susceptibility and resistance using the Kirby-Bauer antibiotic testing method. Each colony was stained using the Gram staining method and was identified by an automatic identifier, known as the VITEK system. We isolated 41 colonies from smokers' oral cavity, and they were sorted as 63% of Gram-positive cocci, 29% of Gram-negative cocci, 3% of Gram-positive bacilli, and 5% of Gram-negative bacilli by gram staining, whereas 38 colonies were isolated from non-smoters' oral cavity, and their proportions were 55% of Gram-positive cocci, 26% of Gram-negative cocci, 3% of Gram-positive bacilli, and 16% of Gram-negative bacilli. The VITEK system revealed specific distribution of bacteria species that Streptococcus mutans (6/41), Gemella morillorum (6/41), Streptococcus oralis (2/41), Streptococcus pneumoniae (1/41), Staphylococcus aureus (3/41), Streptococcus anginosus (1/41), Streptococcus intermedius (1/41), Streptococcus uberis (1/41), and Streptococcus sanguinis (1/41) in smokers oral cavity whereas Streptococcus sanguinis (8/38), Staphylococcus aureus (1/38), Staphylococcus auricularis (1/38), Streptococcus uberis (1/38), Streptococcus intermedius (1/38), Streptococcus mutans (1/38), and Streptococcus oralis (1/38) in those of non-smokers'. Three cases of Staphylococcus aureus from smokers produced Beta-lactamase and were identified methicillin-resistance Staphylococcus aureus (MRSA). However one case of Staphylococcus aureus from non-smoker did not produce Beta-lactamase and was sensitive to methicillin. In conclusion, the distribution of oral flora was different between smokers' and non-smokers' oral cavity, especially Gemella morillorum and MRSA were predominantly found in smoker's oral cavity. These results are useful in the treatment and prevention of patients with stomatopathy caused by smoking.

• Resources Recycling
• /
• v.13 no.1
• /
• pp.47-53
• /
• 2004

As a basic study of the re-using molten converter slag as an ordinary portland cement by conversion process, molten slag and sintered CaO pellet was reacted each other. The dissolution rate of the sintered CaO pellet into the molten slag was measured and the changes of the reaction layer was also investigated. The converter slag reagent-grade $SiO_2$ added was melted and hold for 30 minutes in MgO crucible between $1350∼1500 ^{\circ}C$. Then sintered CaO pellet heated at the same temperature was dipped into the molten slag and hold for 10∼30 min. After the reaction, the crucible was cooled in air and the specimen was cut off to the horizontal direction of the crucible. The dissolution rate of CaO pellet was measured by the change of the radius of sintered CaO pellet and the interface layer was observed by SEM/EDX and XRD. The dissolution rate of sintered CaO pellet contacted with the slag of basicity 1 was 9.8 $\mu\textrm{m}$/min at $1350^{\circ}C$ and increased to 18.0 $\mu\textrm{m}$/min at $1500^{\circ}C$. The rate was slightly decreased to 7.6 $\mu\textrm{m}$/min at $1350^{\circ}C$ and 15.0 $\mu\textrm{m}$/min at $V^{\circ}C$ in the slag of basicity 2. The dissolution rate of CaO in converter slag was followed to the rule of Arrhenius' temperature dependency, and the apparent activation energy of the dissolution of CaO was 36 kcal/mole. In case of the slag basicity of 1, the thickness of $C_2$S layer was 64-118 $\mu\textrm{m}$ and the thickness of $C_3$S was 28∼90 $\mu\textrm{m}$ for 10∼30 minutes at $1500^{\circ}C$. And the thickness of the $C_3$S layer was 90∼120 $\mu\textrm{m}$ at the same conditions in the slag basicity of 2.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.3
• /
• pp.1-7
• /
• 2018

As part of a research dedicated to the field evaluation of the durability of concrete subjected to freezing-thawing, this study analyzes the relationship between the surface roughness and the relative dynamic elastic modulus through image analysis. Four mix compositions with water-to-binder ratios (W/B) of 40%, 50%, 60% and 70% and without AE agent were considered to provoke early freezing. The basic physical properties of the mixes including the relative dynamic elastic modulus and the compressive strength were first evaluated experimentally according to W/B. Then, tests were performed to measure the surface roughness followed by photographs and SEM image analysis. The measured surface roughness tended to increase with larger number of freezing-thawing cycles regardless of W/B. The relative dynamic elastic modulus appeared to increase gradually with the number of cycles for the relatively denser mixes with W/B of 40% and 50%. Besides, the surface roughness increased only at rupture for the mixes with W/B of 60% and 70%. Moreover, the analysis of the photographs of the surface of the mixes with W/B of 40% and 50% revealed that the degradation progressed gradually from the surface with the freezing-thawing cycles. However, for the mixes with W/B of 60% and 70%, apparent change of the surface remained very insignificant until rupture at which damage like cracking could be observed. Consequently, the analysis of surface photograph or the measurement of the surface roughness presented some limitation in assessing the degree of freezing-thawing-induced degradation in case of relatively porous specimens. On the other hand, the photograph and surface roughness appeared to be sufficient for assessing such degradation for the mixes with W/B of 40% and 50%. Accordingly, the image of the surface and the surface roughness are potentially applicable on site for the assessment of freezing-thawing damages in relatively dense mixes.

• Clinical and Experimental Pediatrics
• /
• v.53 no.4
• /
• pp.503-509
• /
• 2010

Purpose : Although neonatal pulmonary hemorrhage is rare, it is associated with high mortality. We aimed to evaluate the risk factors associated with pulmonary hemorrhage in preterm infants and to describe the clinical course, including neonatal morbidity, of infants who developed pulmonary hemorrhage. Methods : We performed a retrospective case-control study of 117 newborn infants aged less than 37 gestational weeks admitted to the neonatal intensive care unit of Daegu Fatima Hospital between January 1995 and December 2008. Control group infants without pulmonary hemorrhage were matched according to the gestational age, duration of mechanical ventilation, and birth weight range (${\leq}100g$). Pulmonary hemorrhage was defined as the presence of hemorrhagic fluid in the trachea and severe respiratory decompensation. Results : Pulmonary hemorrhage occurred in 17 cases of very low birth weight infants (VLBW; birth weight < 1,500 g; median age, 3 days) and 22 cases of low birth weight infants (LBW; $1,500g{\leq}$ birth weight < 2,500 g; median age, 1 day). Antenatal maternal glucocorticoid treatment significantly reduced the incidence of pulmonary hemorrhage in VLBW infants. Low APGAR score (${\leq}3$ at 1 min) and acidosis at birth were associated with significantly high incidence of pulmonary hemorrhage in LBW infants. Conclusion : Antecedent factors and timing of pulmonary hemorrhage of LBW infants were different from those of VLBW infants. The mortality rates of VLBW and LBW infants were 88.2% and 45.5%, respectively. Pulmonary hemorrhage was the principal cause of death in 66.6% VLBW infants and 40.0% LBW infants.

• Microbiology and Biotechnology Letters
• /
• v.43 no.1
• /
• pp.31-37
• /
• 2015

This study was conducted to investigate the bactericidal activity of electrolyzed water (EW) against coliform bacteria on Undaria pinnatifida (UP). The UP was washed with 15% EW, tap water (TW), and distilled water in the following order: 15% EW for 5 and 10 min (1st to 3rd washing process), TW for 1 min, and distilled water for 10 min (3rd to 5th washing process). The washing processes using 15% EW and distilled water occurred a total of 6 times. The number of viable cells, coliform bacteria, and molds in the untreated sample were in the range of 10¹ to 10³ CFU/g. In the case of the UP with 15% EW for 5 min sample, the viable cell counts were reduced by 1-2 log cycles as compared with the untreated sample. The coliform bacteria were not detected except after the 1st EW washing process. Mold counts were not detected in all treatments. In the UP with 15% EW for 10 min sample, the viable cells, coliform bacteria, and mold counts were not detected. In color, there were no significant differences among samples. In sensory evaluation, the UP treated with 15% EW for 10 min (first washing process) got higher scores for color, aroma, and taste than others. These results suggest that the treatment of 15% EW for 10 min is the most effective way to reduce coliform bacteria of the UP.