• The Journal of the Acoustical Society of Korea
• /
• v.25 no.3
• /
• pp.121-128
• /
• 2006

Korean pyeongyeong, a set of sixteen L-shape chime stones covering one and one third octaves, is a standard instrument in the Korean traditional court music. We analyze the vibrational mode frequencies in a pyeongyeong replica which is played at the National Center for Korean Traditional Performance Arts and pyeongyeong remains which are exhibited at King Sejong Memorial Museum. The modal shapes on the Whangjong, the 1st stone and Cheonghyurjong, the 16th stone mapped by scanning accelerometer, TV holography and STAR system. The nominal frequencies in pyeongyeong replica at the National Center for Korean Traditional Performance Arts increase linearly with the thickness of the stones and the tones are tuned in line with the musical scale of Sambunsonik. The sexagenary cycles on the pyeongyeong remains at King Sejong Memorial. which show the Year of product indirectly, are different each other and the tones are not tuned in scale. The relative frequency ratios of each modes on stones differ more than just-noticeable differences from those on the pyeongyeong replica. Modal shapes are same for the two stones regardless of the thickness.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.7 no.2
• /
• pp.27-34
• /
• 2013

Most of existing biomedical signal measurement devices measure and evaluate biomedical signal only in a single device. Also, even if the device is multi-functional, those biomedical signals can be measured by selection of the user. In this paper, we implemented wristband-style biomedical signal measurement device for u-healthcare system to solve the problem above. Implemented device uses 4 infrared sensors to measure the pulse, 2 electrodes to measure the skin conductivity, and 3-axis accelerometer to measure momentum. Also, we propose a communication packet frame for transmitting biomedical signal data to PC or mobile device, using Zigbee. Studies show that our device has the error rate of less than twice for pulse measurement, 85.6%, 84.7% reliability for momentum measurement, and the skin conductivity has changed according to the user's physical status.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.6
• /
• pp.538-546
• /
• 2015

This paper describes an intelligent ankle assistive robot which provides assistive power to reduce ankle torque based on an analysis of ankle motion and muscle patterns during walking on level and sloped floors. The developed robot can assist ankle muscle power by driving an electric geared motor at the exact timing through the use of an accelerometer that detects gait phase and period, and a potentiometer to measure floor slope angle. A simple muscle assistive link mechanism is proposed to convert the motor torque into the foot assistive force. In particular, this mechanism doesn't restrain the wearer's ankle joint; hence, there is no danger of injury if the motor malfunctions. During walking, the link mechanism pushes down the top of the foot to assist the ankle torque, and it can also lift the foot by inversely driving the linkage, so this robot is useful for foot drop patients. The developed robot and control algorithm are experimentally verified through walking experiments and EMG (Electromyography) measurements.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.53-58
• /
• 2001

This paper presents a high resolution capacitive microaccelerometer for applications to personal information systems. We reduce the mechanical noise level of the microaccelerometer by increasing the proof-mass based on deep RIE process. We reduce the electrical noise level by increasing the amplitude of an AC sense voltage. The high sense voltage is obtained by DC-to-DC voltage multiplier. In order to solve the nonlinearity problem caused by the high sense voltage, we modify the conventional comb electrode of straight finger type into that of branched finger type, resulting in self force-balancing effects for enhanced detection linearity. The proposed branched finger capacitive microaccelerometer was fabricated by the deep RIE process of an SOI wafer. The fabricated microaccelerometer reduces the electrical noise at the level of $2.4{\mu}g/\sqrt{Hz}$ for the sense voltage of l6.5V, which is 10.1 times smaller than the electrical noise level of $24.3{\mu}g/\sqrt{Hz}$ at 0.9V. For the sense voltage higher than 2V, the electrical noise level of the microaccelerometer became smaller than the constant mechanical noise level of $11{\mu}g/\sqrt{Hz}$. Total noise level, including the electrical noise and the mechanical noise, has been measured as $9{\mu}g/\sqrt{Hz}$ for the sense voltage of 16.5V, which is 3.2 times smaller than the total noise of $28.6{\mu}g/\sqrt{Hz}$ for the sense voltage of 0.9V. The self force-balancing effect results in the increased stiffness of 1.98 N/m at the sense voltage of 17.8V, compared to the stiffness of 1.35 N/m at 0V, thereby generating the additional stiffness at the rate of $0.002N/m/V^{2}$.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.378-383
• /
• 2009

In these days, many systems are equipped with people to infer their intention and provide the corresponding service. People always carry their own mobile device with various sensors, and the accelerator takes a role in this environment. The accelerator collects motion information, which is useful for the development of gesture-based user interfaces. Generally, it needs to develop an effective method for the mobile environment that supports relatively less computational capability since huge computation is required to recognize time-series patterns such as gestures. In this paper, we propose a 2-stage motion recognizer composed of low-level and high-level motions based on the motion library. The low-level motion recognizer uses the dynamic time warping with 3D acceleration data, and the high-level motion is defined linguistically with the low-level motions.

• Journal of KIISE
• /
• v.41 no.10
• /
• pp.745-761
• /
• 2014

To address the problems of existing traffic information acquisition systems such as high cost and low scalability, wireless sensor networks (WSN)-based traffic information acquisition systems have been studied. WSN-based systems have many benefits including high scalability and low maintenance cost. Recently, various sensors are studied for traffic surveillance based on WSN, such as magnetic, acoustic, and accelerometer sensors. However, ultrasonic sensor based systems have not been studied. There are many issues for WSN-based systems, such as battery driven operation and low computing power. Thus, power saving methods and specific algorithms with low complexity are necessary. In this paper, we introduce optimal methodologies for power saving of ultrasonic sensors based on the modeling and analysis in detail. Moreover, a new vehicle detection algorithm for low complexity using ultrasonic data is presented. The proposed methodologies are implemented in a tiny microprocessor. The evaluation results show that our algorithm has high detection accuracy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.8
• /
• pp.3398-3405
• /
• 2011

Vibration intensity (VI) method is used to reduce sound source generated from air-conditioning rotary compressor. Generally VI method is a good tool to find a sound source through vibration power flow. In this paper, the vibrations are measured by using the 3 uni-axial accelerometer from both the shells of the normal compressor and the fault compressor. The VI method successfully found out the sound source position on the surface of the compressor. In addition, the main noise (3kHz ~ 6.3kHz) was deminished by applying the newly designed compressor inner part which is related to the orginal noise source.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.8-16
• /
• 2017

There are various methods to count the number of repetitive motions such as jump rope. Most of the methods use features extracted from the time-varying waves of acceleration or angular velocity, which is the main feature in the count of rotations in jump rope. However, there exist several variables and it is not easy to find the count with a single sensor. For example, accelerometer is susceptible to noise and vibration, and the angular velocity may cause a drift phenomenon, which is the main cause of the inaccurate count of jump rope rotation. In this paper, complementary filter is used to consider two sensors simultaneously and complement each other, which results in more accurate count in jump rope rotation. The proposed method can count the exact number of jump rope rotation compared to other existing methods only using one sensor value, which is confirmed through experimental results.

• Physical Therapy Korea
• /
• v.11 no.2
• /
• pp.27-34
• /
• 2004

The purpose of this study was to identify the influence of wedged insole and foot progression angle (FPG) on lateral thrust of knee in healthy subjects. Fifteen healthy male subjects were recruited from Suncheon First College, in Suncheon. The subjects randomly walked at the comfortable velocity under five conditions: bare footed, medio-lateral $10^{\circ}$ wedged insoles, toe-in and toe-out gait. The lateral thrust was measured by a accelerometer with telemeter during walking. Data was collected while each subject walked for about 10 gait cycle on a flat, level walkway at their normal speed. The middle three gait cycle were used for averaged peak value of lateral acceleration. The three averaged peak value of lateral acceleration were collected under each condition at heel strike. The results showed that averaged peak value of lateral acceleration increased significantly in medial wedged insole and toe-in gait and decreased significantly in lateral wedged insole and toe-out gait as compared with bare footed (p<.05). These results suggest that wedged insole as well as walking strategy, such as foot progression angle, may prevent progression of degenerative knee osteoarthritis.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.9
• /
• pp.694-701
• /
• 2002

In this paper, through the study on locations of structural transducers for active control of the radiated sound from the vibrating plate, the active structural acoustic control (ASAC) system is proposed. And, for the evaluation of the proposed location, the experiment of the active structural acoustic control is implemented using the multi-channel filtered-x LMS algorithm and an additional filter (Acoustic Prediction Filter) to estimate the radiated sound using the acceleration signals of the plate. The structural transducers are piezoceramic actuator (PZT) and accelerometer. PZT is used as an actuator to reduce the vibration and the radiated sound. To maximize the control performance, each PZT actuator is located at the position that has the largest control sensitivity of the plate bending moment in the direction of x and y coordinates and the optimal PZT location is validated experimentally. Also, to find the acoustic prediction filter accurately, two accelerometers are located at the positions that have the largest radiation efficiencies of the plate, and the proposed locations are validated by simulation using the Rayleigh integral. The multi-channel filtered-x LMS algorithm is introduced to control a complex 2-D structural vibration mode. Finding the locations of structural transducers for active structural acoustic control of the radiated sound, the active structural acoustic control (ASAC) system can be presented and validated by experiments using a real time control system.