• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.224-227
• /
• 1999

A high power deep-water sonar transducer of FFR (Free Flooded Ring) type has been designed using a coupled FE-BEM. The present sonar transducer is composed of rectangular piezoelectric ceramics and pie-shaped steels (or the advantage of simple fabrication. The dynamics of the sonar transducer is modelled in three dimensions and is analyzed with external electrical excitation conditions. Different results are available such as steady-state frequency response for TX and RX displacement modes, directivity patterns, back-scattering patterns, bandwidths, transmitting voltage responses and receiving sensitivity responses. The TV response shows a very high acoustic pressure of 150 dB/lV (ref $1{\mu}Pa$ at 1m) at 1900 Hz. This ultra high power response of the sonar transducer indicates a new possibility of the sonar transducer development.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.1
• /
• pp.64-75
• /
• 2010

This study introduces a complete feature map building method of sonar sensors for mobile robots. This method enhances the reality of feature maps by extracting even circle features as well as line and point features from sonar data. Edge features are, moreover, generated by combining line features close to circle features extracted around comer sites. The uncertainties of the specular reflection phenomenon and wide beam width of sonar data can be, therefore, reduced through this map building method. The experimental results demonstrate a practical validity of the proposed method in those environments.

• Journal of Ocean Engineering and Technology
• /
• v.7 no.1
• /
• pp.107-113
• /
• 1993

Sidescan sonar uses the fan type beam which has horizontally narrow and vertically somewhat wide beam pattern. To construct such a beam we will use an array of transducers. In case of using single transducer it must have a high frequency to have the fan type beam, but in case of using an array it must have to be high frequency. We are planning to use 30 kHz transducers for our sidescan sonar under development. This paper shows ways of designing a narrow beam for the sidescan sonar system by illustrating various shapes of the beam patterns.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05b
• /
• pp.62-65
• /
• 2003

When a mobile robot moves around autonomously without man-made corrupted bye landmarks, it is essential to recognize the placement of surrounding objects especially for self localization, obstacle avoidance, and target classification and localization. To recognize the environment we use many Kinds of sensors, such as ultrasonic sensors, laser range finder, CCD camera, and so on. Among the sensors, ultra sonic sensors(sonar)are unexpensive and easy to use. In this paper, we analyze the sonar data and propose a method to recognize features of indoor environment. It is supposed that the environments are consisted of features of planes, edges, and corners, For the analysis, sonar data of plane, edge, and corner are accumulated for several given ranges. The data are filtered to eliminate some noise using the Kalman filter algorithm. Then, the data for each feature are compared each other to extract the character is ties of each feature. We demonstrate the applicability of the proposed method using the sonar data obtained form a sonar transducer rotating and scanning the range information around a indoor environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.3
• /
• pp.559-567
• /
• 1999

A piezoelectric flextentional sonar transducer has been simulated using a coupled FE-BEM. The dynamics of the sonar transducer is modelled in three dimensions and is analyzed with external electrical excitation conditions. Different results are available such as steady-state displacement modes, underwater directivity patterns, resonant frequencies, bandwidths, quality factors, output acoustic powers and transmitting voltage responses. It is shown that the present barrel-stave sonar transducer of the piezoelectric material produces flextentional displacements which could be related with higher output power, lower quality factor and more omnidirectional beam pattern than other types of sonar transducers. The results of the present sonar transducer modelling are also compared with those of a commercial package such as ATILA.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.91.3-91
• /
• 2001

A sensor fusion scheme for mobile robot environment recognition that incorporates range data and contour data is proposed. Ultrasonic sensor provides coarse spatial description but guarantees open space with no obstacle within sonic cone with relatively high belief. Laser structured light system provides detailed contour description of environment but prone to light noise and is easily affected by surface reflectivity. Overall fusion process is composed of two stages: Noise elimination and belief updates. Dempster Shafer´s evidential reasoning is applied at each stage. Open space estimation from sonar range measurements brings elimination of noisy lines from laser sensor. Comparing actual sonar data to the simulated sonar data enables ...

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.172.5-172
• /
• 2001

Target Motion Analysis(TMA) for Passive Sonar Systems with bearing-only measurements needs to enhance system observability to improve target tracking performance by ownship maneuvering. However, tracking problem incurred by weak observaility result in slow convergence of the target estimates. On the other hand, active sonar systems do not have problem associated with system observaility. However, it drawback related to system survivability. In this paper, the algorithm that could be used in Active/passive Mixed-Mode Sonar Systems is proposed to analyze maneuvering target motion and to improve TMA performance. The proposed TMA algorithm is tested by a series of computer simulation runs and the results ...

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.382-390
• /
• 2021

Synthetic aperture sonars as well as side scan sonars or multibeam echo sounders have been commercialized and are widely used for seafloor imaging. In Korea related research such as the development of a towed synthetic aperture sonar system is underway. In order to obtain high-resolution synthetic aperture sonar images, it is necessary to accurately estimate the platform motion on which it is installed, and a precise underwater navigation system is required. In this paper we are going to provide reference data for determining the required navigation accuracy and precision of navigation sensors by quantitatively analyzing how much distortion of the sonar images occurs according to motion characteristics of the platform equipped with the synthetic aperture sonar. Five types of motions are considered and normalized root mean square error is defined for quantitative analysis. Simulation for error analysis with parameter variation of motion characteristics results in that yaw and sway motion causes the largest image distortion whereas the effect of pitch and heave motion is not significant.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.10
• /
• pp.1174-1180
• /
• 2011

Not all line or point features capable of being extracted by sonar sensors from cluttered home environments are useful for simultaneous localization and mapping (SLAM) due to their ambiguity because it is difficult to determine the correspondence of line or point features with previously registered feature. Confused line and point features in cluttered environments leads to poor SLAM performance. We introduce a sonar feature structure suitable for a cluttered environment and the extended Kalman filter (EKF)-based SLAM scheme. The reliable line feature is expressed by its end points and engaged togather in EKF SLAM to overcome the geometric limits and maintain the map consistency. Experimental results demonstrate the validity and robustness of the proposed method.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.9 no.3
• /
• pp.173-182
• /
• 2014

The CRT monitor display system for SONAR signal that are commonly used in ships or naval vessels uses vector scanning method. Therefore the processing circuits of the system are complex. Also the purchase of parts is difficult as well as high-cost because the production had been shut down. FPGA-based embedded system is flexible to various digital applications because it can be able to simplify processing circuits and to make a easy customized design for end user, and it provides low-cost high-speed performance. In this paper, we describe an implementation of FPGA embedded system for real-time SONAR signal display using the triple buffering method to overcome some weakness of existing CRT system. Our system provides real-time acquisition and display capability of SONAR signal, and removes afterimage effect that is a critical problem of the system proposed in the preceding study.