• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.4
• /
• pp.261-267
• /
• 2009

Due to the measurement noise or system noise, the performance of photovoltaic power generation system can be degraded. If this noise is contained in the solar array voltage measurement signal, the correct operation of the maximum power point tracker can not be guaranteed. The application of the extended Kalman filter to the photovoltaic system can obtain enhanced states estimation result. The Kalman filter provides a recursive solution to optimally estimate from random noise signals. Additionally, as a consequence of Kalman filter, the unmeasurable state such as inductor current can be estimated without current sensor. The methods for system modeling and extended Kalman filter design are presented and the experimental results verify the validity of the proposed system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.7
• /
• pp.919-926
• /
• 2012

In order to control a LTI(Linear Time Invariant) system subjected to system noise and measurement noise, first of all, it is necessary to estimate the state of system with reliability. Kalman filtering technique has been widely used to estimate the state of the stochastic LTI system with stationary noise characteristics because of its estimation ability versus algorithm simplicity. However, it often fails to estimate the state of the LTI system of which system parameter uncertainty exists partly and/or input uncertainty exists. In this paper, a new estimation technique based on Kalman filter is suggested for stochastic LTI system under parameter uncertainty and/or input uncertainty. A fuzzy estimation algorithm against uncertainties is introduced so as to compensate the state estimate filtered by Kalman filter. In order to verify the state estimation performance of the suggested technique, several simulations are accomplished.

• Journal of Environmental Science International
• /
• v.16 no.12
• /
• pp.1319-1324
• /
• 2007

A tank model in conjunction with Kalman filter is developed for prediction of sediment yield from an upland watershed in Northwestern Mississippi. The state vector of the system model represents the parameters of the tank model. The initial values of the state vector were estimated by trial and error. The sediment yield of each tank is computed by multiplying the total sediment yield by the sediment yield coefficient. The sediment concentration of the first tank is computed from its storage and the sediment concentration distribution(SCD); the sediment concentration of the next lower tank is obtained by its storage and the sediment infiltration of the upper tank; and so on. The sediment yield computed by the tank model using Kalman filter was in good agreement with the observed sediment yield and was more accurate than the sediment yield computed by the tank model.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.3
• /
• pp.7-14
• /
• 2008

Unmanned vehicle has a performance for finding the path and the way point by itself, so called orientation and direction. For the more precise navigation performance, Extended kalman filter, which is integrated with inertial navigation system and global positioning system is proposed in this paper. Extended kalman filter's performance is evaluated by the simulation and applied to the unmanned vehicle. The test result shows the effectiveness of Extended kalman filter for the navigation.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.433-436
• /
• 2003

The estimation of the position and the orientation for the mobile robot constitutes an important problem in mobile robot navigation. Although the odometry can be used to describe the motions of the mobile robots, there inherently exist the gaps between the real robots and the mathematical model, which may be caused by a number of error sources contaminating the encoder outputs. Hence, applying the standard extended Kalman filter for the nominal model is not supposed to give the satisfactory performance. As a solution to this problem, a new robust extended Kalman filter is proposed based on the Krein space approach. We consider the uncertain discrete time nonlinear model of the mobile robot that contains the uncertainties represented as sum quadratic constraints. The proposed robust filter has the merit of being constructed by the same recursive structure as the standard extended Kalman filter and can, therefore, be easily designed to effectively account for the uncertainties. The simulations will be given to verify the robustness against the parameter variation as veil as the reliable performance of the proposed robust filter.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.05a
• /
• pp.303-306
• /
• 2003

In radar tracking, since the sensor measures range, azimuth and elevation angle of a target, the measurement equation is nonlinear and the extended Kalman filter (EKF) is applied to nonlinear estimation. The conventional EKF has been widely used as a nonlinear filter for radar tracking, but the considerably large measurement error due to the linearization of nonlinear function in highly nonlinear situations may deteriorate the performance of the EKF To solve this problem, a fuzzy-model-based Kalman filter (FMBKF) is proposed for radar tracking. The FMBKF uses a local model approximation based on a TS fuzzy model instead of a Jacobian matrix to linearize nonlinear measurement equation. The hybrid GA and RLS method is used to identify the premise and the consequent parameters and the rule numbers of this TS fuzzy model. In two-dimensional radar tracking problem, the proposed method is compared with the conventional EKF.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.4
• /
• pp.537-542
• /
• 2008

Cricket is an excellent indoor location system and it can successfully solve many critical problems such as user privacy, decentralized administration. But in some practical applications, Cricket sometimes didn't provide location with enough accuracy, and was unable to determine when it was giving inaccurate information. For getting high-accuracy tracking performance from location data contaminated with noise, some types of filters are required. Kalman Filter is an efficient recursive filter that estimates the state of a dynamic system from a series of incomplete and noisy measurement. The filter is very powerful in the field of autonomous and assisted navigation. In this paper, we carry out comparative studies to validate the performance of the application of Kalman Filter to Cricket based localization system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.9
• /
• pp.774-781
• /
• 2013

The purpose of this paper is to design a DVL-RPM based VKF (Velocity Kalman Filter) design for a performance improvement underwater integrated navigation system. The proposed approach relies on a VKF, augmented by a altitude from Echo-sounder based switching architecture to yield robust performance, even when DVL (Doppler Velocity Log) exceeds the measurement range and the measured value is unable to be valid. The proposed approach relies on two parts: 1) Indirect feedback navigation Kalman filter design, 2) VKF design. To evaluate proposed method, we compare the results of the VKF aided navigation system with simulation result from a PINS (Pure Inertial Navigation System) and conventional INS-DVL method. Simulations illustrate the effectiveness of the underwater navigation system assisted by the additional DVL-RPM based VKF in underwater environment.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.4
• /
• pp.187-192
• /
• 2013

Because of the importance of small target detection in infrared images, many studies have been carried out in this area. Using a Kalman filter and mean shift algorithm, this study proposes an algorithm to track multiple small moving targets even in cases of target disappearance and appearance in serial infrared images in an environment with many noises. Difference images, which highlight the background images estimated with a background estimation filter from the original images, have a relatively very bright value, which becomes a candidate target area. Multiple target tracking consists of a Kalman filter section (target position prediction) and candidate target classification section (target selection). The system removes error detection from the detection results of candidate targets in still images and associates targets in serial images. The final target detection locations were revised with the mean shift algorithm to have comparatively low tracking location errors and allow for continuous tracking with standard model updating. In the experiment with actual marine infrared serial images, the proposed system was compared with the Kalman filter method and mean shift algorithm. As a result, the proposed system recorded the lowest tracking location errors and ensured stable tracking with no tracking location diffusion.

• 전기의세계
• /
• v.31 no.2
• /
• pp.119-125
• /
• 1982

A new approach to the maneuvering target tracking problem is proposed. Its basic concept is to take the maneuver variable from the measurements. Tracking scheme based on the Kalman filter estimates the maneuver varieble from the residual and uses the estimates to update the Kalman filter. The estimation process is independent of target types and a model of the maneuver characteristics. All the filtering algorithms are processed in polor coordinate. Simulation results are presented and compared to that of the extended Kalman filter.