• 감성과학
• /
• 제15권2호
• /
• pp.201-208
• /
• 2012

본 연구에서는 심한 소음으로 불쾌감을 주는 스포츠웨어용 PTFE 라미네이팅 투습발수 직물 8종을 대상으로 직물 마찰음의 심리음향학적 특성을 고찰하고, 심리음향학적 특성에 영향을 미치는 직물의 기본 특성과 역학적 특성 간의 관계를 파악함으로써, 직물의 심리음향학적 마찰음을 낮출 수 있는 변인을 찾아내고자 하였다. 직물 마찰음 시뮬레이터를 이용하여 녹음한 직물의 소리에서 Zwicker의 파라미터인 심리음향학적 크기(loudness(Z)), 날카로움(sharpness(Z)), 거칠기(roughness(Z)), 그리고 변동강도(fluctuation strength(Z))를 계산한 뒤, 소리특성에 대한 사후검정 결과에 따라 시료를 덜 시끄러운 PTFE 필름 그룹과 더 시끄러운 PTFE 필름 그룹으로 나누어 마찰음의 심리음향학적 특성과 직물의 역학적 특성, 기본특성간의 관계를 고찰하였다. 심리음향학적 특성 중 loudness(Z)만이 시료의 마찰음과 유의한 관계에 있는 것으로 나타났으며, 분석 결과 직물의 기본 특성에서는 layer가 얇고 필라멘트사를 사용한 직물의 마찰음이 덜 시끄럽게 인지되는 것으로 나타났으며, 직물 마찰음의 심리음향학적 크기에 영향을 미치는 주요변수로는 layer로 것으로 나타났다. 마찰음이 작은 PTFE 필름 그룹의 경우 전단 방향으로의 변형이 어려울수록 마찰음이 시끄나타났다. 시끄러운 마찰음을 갖는 PTFE 필름 그룹의 경우 심리음향학적 크기에 영향을 미치는 주요 변수로 전단이력이 설명 변인으로 포함되었다.

• 한국의류산업학회지
• /
• 제14권3호
• /
• pp.486-491
• /
• 2012

This study examined the sound characteristics of Taekwondo uniform fabrics to investigate the relationship between the sound parameters and the mechanical properties of the fabric as well as to provide the conditions to maximize the frictional sound of the uniform. Frictional sounds of 6 fabrics for Taekwondo uniforms were generated by the Simulator for Frictional Sound of Fabrics. The frictional speeds were controlled at low(0.62 m/s), at mid(1.21 m/s) and at high(2.25 m/s) speed, respectively. The frictional sounds were recorded using a Data Recorder and Sound Quality System subsequently, the physical sound properties such as SPL(Sound Pressure Level) and Zwicker's psychoacoustic parameters were calculated. Mechanical properties of specimens were measured by KES-FB. The SPL, Loudness(Z) values increased while Sharpness(Z) value decreased. In the physical sound parameter, specimen E had the highest SPL value at low speed and specimen B at high speed. In case of Zwicker's psychoacoustic parameters, the commercially available Taekwondo uniform fabrics(E, F) showed higher values of Loudness(Z), Sharpness(Z), and Roughness(Z), that indicates they can produce louder, shaper and rougher sounds than other fabrics for Taekwondo uniforms. The decisive factors that affected frictional sounds for Taekwondo uniforms were W(weight) as well as EM(elongation at maximum load) at low speed and WC(compressional energy) at high speed.

• 한국의류산업학회지
• /
• 제15권4호
• /
• pp.620-629
• /
• 2013

This study examines the rustling sound characteristics of electrospun nanofiber web laminates according to layer structures. This study assesses mechanical properties and frictional sounds (such as SPL); in addition, Zwicker's psychoacoustic parameters (such as Loudness (Z), Sharpness (Z), Roughness (Z), and Fluctuation strength (Z)) were calculated using the Sound Quality Program (ver.3.2, B&K, Denmark). The result determined how to control these characteristics and minimize rustling sounds. A total of 3 specimens' frictional sound (generated at 0.63 m/s) was recorded using a Simulator for Frictional Sound of Fabrics (Korea Patent No. 10-2008-0105524) and SPLs were analyzed with a Fast Fourier Transformation (FFT). The mechanical properties of fabrics were measured with a KES-FB system. The SPL value of the sound spectrum showed 6.84~58.47dB at 0~17,500Hz. The SPL value was 61.2dB for the 2-layer PU nanofiber web laminates layered on densely woven PET(C1) and was the highest at 65.1dB for the 3-layer PU nanofiber web laminates (C3). Based on SPSS 18.0, it was shown that there is a correlation between mechanical properties and psychoacoustic characteristics. Tensile properties (LT), weight (T), and bending properties (2HB) showed a high correlation with psychoacoustic characteristics. Tensile linearity (LT) with Loudness (Z) showed a negative correlation coefficient; however, weight (T) with Sharpness (Z) and Roughness (Z), and bending hysteresis (2HB) with Roughness (Z) indicated positive correlation coefficients, respectively.