• 한국세라믹학회지
• /
• 제33권3호
• /
• pp.259-268
• /
• 1996

In the present study the effect of the addition of Fe on the pressureless and hot press sintering behavior was studied under Ar atmosphere. Pressureless sintering was performed 1900~220$0^{\circ}C$ under. Ar atmosphere. The addition of 1 wt% Fe was increased effectively of the sintered density. However it was impossible to obtain high density higher than 90%,. Zr-Fe-B compound in liquid phase was observed from the EDS and WDS analysis. It was considered that sinterability was enhanced due to the mass transfer through Fe based liquid phase formed at the sintering temperature. Hot pressing was performed at 1600~1$700^{\circ}C$ under Ar atmos-phere for 1 hr. It was possible obtain 95% relative density of ZrB2 specimen which is higher density at pressure-less sintering. It could be thought that ZrB2 particles was rearranged through liquid phase by applied pressure during initial stage of sintering.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1992년도 춘계연구발표회 논문개요집
• /
• pp.66-67
• /
• 1992

• 한국세라믹학회지
• /
• 제34권11호
• /
• pp.1099-1106
• /
• 1997

In the present study, the effect of TiB2 addition on the sintering behavior of ZrB2 ceramics was studied with hot pressing under Ar atmosphere. Hot pressing experiments were carried out in graphite dies at the 1$700^{\circ}C$, 180$0^{\circ}C$ under Ar atmosphere. The sintering density increased with increasing TiB2 contents. With the addition of 10wt% TiB2 almost theoretical density could be achieved by hot-pressing at 180$0^{\circ}C$. Zr-Ti-Fe-B compound in liquid phase was observed from the EDS and WDS analysis. It was considered that sinterability was enhanced due to the mass transfer through liquid phase formed at the sintering temperature. In addition of TiB2, transition metal of groups IV, substitutional solid solution could be formed.

• 한국주조공학회지
• /
• 제13권2호
• /
• pp.168-174
• /
• 1993

It has been known that the grain refinement of Cu base alloys greatly improved mechanical properties, castability, workability and hot shortness resistance etc. In this study CuZr50, CuP7, CuFe7, CuMg10 binary alloys were added as grain refiners in CuZn36 alloy. The alloys melted in vacuum and controlled in mixed gas conditions and casted at $1050^{\circ}C$. Zr-P-X compound has significantly grain refined but oxygen has been found detrimental to grain refinement. In the case of Zr /B ratio below 4, B acted as grain growth element in this alloy.

• 분석과학
• /
• 제9권4호
• /
• pp.382-391
• /
• 1996

세라믹스 분야, 전자요업 분야 등에서 폭넓게 사용되고 있는 티탄산바륨 소재에 대하여 신속하고 정확하게 분석할 수 있는 X-선 형광분석용 표준물질 12종을 제작하였다. 특히 매질효과 제거, 보관성, 균질성 등을 고려하면서 융제 ($Li_2B_4O_7+LiBO_2$)로 시료를 16배 희석하여 제작 하였다. 티타늄을 비롯한 몇 원소는 매트릭스의 영향을 받는 것으로 보여 실험 계수법을 사용하고 Lucas Tooth와 Price의 식을 이용해 매트릭스의 영향을 보정해 주었다. 세 곳의 분석기관에서 X-선 형광분광기로 12개의 표준물질에 포함된 15 원소에 대하여 검정곡선을 작성해 본 결과 BaO, PbO, SrO, $Fe_2O_3$, $La_2O_3$, $SnO_2$, ZnO, $ZrO_2$, CaO들은 correlation factor가 0.995를 넘는 아주 좋은 곡선을 얻었다. $SiO_2$와 $Al_2O_3$는 X-선 형광세기도 약하고 correlation factor가 낮은 검정 곡선을 보였다.